馃攲鉁掞笍Bricolaje, elabora tu propio ordenador de cargadores /Do-it-yourself, make your own charger computer馃攲鉁掞笍
Hola! Gran familia hive, espero tengan un excelente y provechoso d铆a, en esta ocasi贸n haremos un ordenador de cargadores.
Hello, thank you hive family, I hope you have an excellent and profitable day, this time we will make a charger computer.
Listos??? Hoy vamos a solucionar un problemita que casi todos tenemos con nuestros cargadores, donde el desorden y el maltrato del mismo son los pretagonistas, as铆 que para eso necesitaremos lo siguiente.
Ready? Today we are going to solve a little problem that almost all of us have with our chargers, where disorder and mistreatment are the main characters, so for that we will need the following.
Materiales:
鉁掞笍 Un tubo de cart贸n,(el del papel aluminio).
鉁掞笍 La caja del tubo.
鉁掞笍 L谩piz.
鉁掞笍 Regla.
鉁掞笍 Marcador.
鉁掞笍 Barra de Silicon.
鉁掞笍 Pintura negra,(opcional).
鉁掞笍 Pincel.
鉁掞笍 Estilete.
鉁掞笍 Alambre,(utilice los alambres blancos que traen los sandwiches del supermercado).
Materials:
鉁掞笍 A cardboard tube,(the one from the aluminum foil).
鉁掞笍 The box of the tube.
鉁掞笍 Pencil.
鉁掞笍 Ruler.
鉁掞笍 Marker.
鉁掞笍 Silicon rod.
鉁掞笍 Black paint,(optional).
鉁掞笍 Brush.
鉁掞笍 Stylus.
鉁掞笍 Wire,(use the white wires that the sandwiches from the supermarket bring).
馃攲 Paso uno:
Con nuestra regla haremos tres divisiones en nuestro tubo, un punto en la medida de 7.5 cm, 15 cm y 22.5 cm.
馃攲 Step one:
With our ruler we will make three divisions in our tube, one point in the measure of 7.5 cm, 15 cm and 22.5 cm.
馃攲 Paso dos:
Con el Estilete cortaremos en forma de l铆nea en los puntos ya antes marcados, esa l铆nea debe ser un poco gruesa para que entre los cables del cargador y posterior un peque帽o cuadrado para que entre la base del mismo, observe.
馃攲 Step two:
With the Estilete we will cut in the form of a line at the points already marked before, that line should be a little thick to enter the charger wires and later a small square to enter the base of the charger, note.
馃攲Paso tres:
Abriremos la caja del tubo y haremos un cuadrado del tama帽o del mismo, s煤per r谩pido ya que la caja tiene las medidas del tubo... posterior con el cart贸n que sobra se har谩 dos c铆rculos peque帽os para tapar el tubo por los lados.
馃攲Step three:
We will open the tube box and make a square the size of the tube, super fast since the box has the measurements of the tube... later with the leftover cardboard we will make two small circles to cover the tube on the sides.
馃攲Paso cuatro:
Pintaremos todo del color de su preferencia.
馃攲Step four:
We will paint everything in the color of your choice.
馃攲Paso cinco:
En la parte inferior del cart贸n que ser谩 la base de nuestro tubo, haremos tres orificios (cada uno debajo de la divisiones del tubo), los orificios los hice con del punta del lapiz...posterior pegaremos el tubo al cart贸n, los c铆rculos peque帽os al tubo y nuestra cart贸n de base a la pared.
Step five:
On the bottom of the cardboard that will be the base of our tube, we will make three holes (each one under the tube divisions), the holes I made them with the tip of the pencil...later we will glue the tube to the cardboard, the small circles to the tube and our base cardboard to the wall.
Nota: Lo plateado que se ve en el cart贸n es lo que trae la caja del tubo para cortar el papel aluminio, lo us茅 como adorno.
Note: The silver that you can see in the cardboard is what comes in the box of the tube to cut the aluminum foil, I used it as an ornament.
馃攲Paso seis:
Colocaremos nuestros cargadores en el tubo y con los alambres sujetaremos los cables.
馃攲Step six:
We will place our chargers in the tube and with the wires we will attach the wires.
Genial!! Ya tenemos s煤per ordenados nuestros cargadores y la garant铆a de su duraci贸n por su buen cuidado.
Great! We already have our chargers super tidy and the guarantee of its duration due to its good care.