Incubadora casera con materiales reciclados
Hola para todos los hivers
Aquí les traigo un pequeño post de una incubadora casera que realice con materiales reciclados y con un gran índice de nacimientos.
** ********* **
**
** ********* **
**
Los parámetros de temperatura varían según la especie a incubar, en las aves (Gallus gallus domesticus), que no son más que las gallinas domésticas, la temperatura para su incubación está en el rango de 37.5 a 37.7 grados para mayor exactitud , el tiempo de duración desde la postura hasta el nacimiento está en el orden de los 20 a 22 días siendo, siendo 21 días el estándar por lo que también depende proporcionalmente de la temperatura. En los primeros días de incubación y hasta el día 18 de la misma la humedad relativa debe de estar en el orden del 50 a 60 %, en los tres últimos días se debe de incrementar la temperatura hasta un 70 a 80 % para que esta mayor humedad pueda ablandar la cáscara del huevo para facilitar la ruptura por parte del polluelo y su eclosión sea más fácil.
**
Los materiales usados para la construcción fueron
un gabinete de madera contrachapado.
Un par de bombillas incandescente de 120 voltios AC.
un ventilador de microondas.
Un electroventilador de 120 voltios AC .
Una cacerola de aluminio.
Una fuente de poder de12voltios DC.
Un par de Termostato Digital Controlador De Temperatura 12v Dc Xhw1209.
Diagrama del circuito.
Espero les guste si quieren un tutorial acerca de sobre como hacerlo más detalladamente , con gusto estoy dispuesto a responder cualquier duda que tengan, ya que por mi experiencia puedo servir para evitar el ensayo y error por el cual muchos no logran obtener buenos resultados hasta un próximo post
adiós .
Homemade incubator with recycled materials.
Hello to all hivers
Here I bring you a little post of a homemade incubator that I made with recycled materials and with a great hatching rate
.
** ********* **
**
** ********* **
**
Temperature parameters vary according to the species to be incubated, in poultry (Gallus gallus domesticus), which are no more than domestic hens, the temperature for incubation is in the range of 37.5 to 37.7 for greater accuracy , the duration time from lay to hatch is in the order of 20 to 22 days being, 21 days being the standard so it also depends proportionally on the temperature. In the first days of incubation and until the 18th day of incubation the relative humidity should be in the order of 50 to 60%, in the last three days the temperature should be increased up to 70 to 80% so that this higher humidity can soften the egg shell to facilitate the breaking by the chick and its hatching is easier.
**
The materials used for the construction were
a plywood cabinet.
A pair of 120-volt AC incandescent bulbs.
a microwave fan.
A 120 volt AC electric fan.
An aluminum pan.
A 12volt DC power supply.
A Pair Of Digital Thermostat Temperature Controller 12v DC Xhw1209.
Circuit Diagram.
I hope you like it if you want a tutorial about how to do it in more detail, I am happy to answer any questions you have, since my experience I can serve to avoid trial and error by which many fail to get good results until a next post
bye .
Translated with www.DeepL.com/Translator (free version)