Good afternoon dear friends. If you still do not know how to create your own server for Minecraft PE 0.11.0 then this is a simple instruction specifically for you. And so, to create the Server, you will need
- Directly Android device.
- Wi-Fi connection.
- The program Pocket Mine.
Now let's start creating a server. First, you need to enter the ip address of your router in the browser's search bar. Ip address you can find in the instructions to your Wi-Fi router, or on it. You also need the Administrator login and password. You will find yourself in the Router setup menu. To do this, you need to enter any port consisting of 5 digits, which you can enter arbitrarily, and also zabindit one IP, so that the router does not connect us to others. (This is all for the stable operation of the server). To do this, go to the section "IP and MAC address bindings". Next you need to know the Mac address of your Android device, you can find it by going to Settings / About phone. The MAC address will consist of five pairs of digits separated by a colon and will look something like this: XX: XX: XX: XX: XX. Now we move to the ARP table in it, find our Mac address, and next to it you will see the IP and remember these values. After that, go to "Binding Options", find the "Add" button there and enter the data that you remembered, do not forget to tick off when adding addresses. After that we need to expand the ports, for this we go to the section "Forwarding / Virtual Servers "and press the button
"Add". Now fill in the following lines according to the sample. ※ Service port: 19132IP-address: the address that you zabindili at the very beginning. At this point, the router setup has come to an end. We are going to configure your Android device. We open the previously installed program. After you run it, you will be prompted to download the base for your server, then act on your own. Now configure our server. The port is left the same, we enter the name of your server, which you will come up with yourself and put a check on against "Advanced". Now you need to scroll to the very end of the list and allocate RAM for your server. It will depend on the power of your device, but we do not recommend allocating more than 60%. Next we see the "View Distanse" item, it is responsible for the rendering range and we strongly recommend leaving this parameter unchanged. Now click "Save" and start our server. Everything, he is ready for a joint game! What would your friends be able to connect to you, do the following: go to the site 2ip copy there IP which he identified (this is your IP) and enter it into Minecraft with the same port. That's all. Play for health. Also you can install plugins on your server