Hola amigos, ¡bienvenidos a mi mundo!
Espero que todos estén muy bien. Tenía mucho tiempo sin venir para la comunidad porque no había hecho nada bonito para enseñarles, pero hace unos días mi mamá encontró unas fotos en su teléfono de cuando decoré un sombrero de cogoyo de navidad para una feria de la escuela y aunque ya la navidad pasó eso no importa porque lo pueden hacer para la navidad de este año y como quedó bonito yo se los quería enseñar.
Bueno este sombrero era para el cierre de proyecto de cuando yo estaba en sexto y había una feria de navidad y para decorar la mesa la maestra nos pidió unos sombreros originales de navidad y a mi mamá se le ocurrió usar ese que lo usaba mi hermano para los proyectos de la escuela y ponerlo como un reno y como era fácil me dijo que yo podía hacerlo y de verdad sí es fácil y se ve bien bonito y lo mejor es que lo pueden hacer niños como yo que tenía 11 años nada más cuando lo hice.
Yo utilicé
💗 Hoja blanca o cualquiera para hacer los moldes, puede ser de reciclaje
💗 Un lápiz
💗 Cartulina metalizada roja y marrón o bronce
💗 Tijera
💗 Pistola de silicón
💗 Cinta de doble faz para pegar
💗 Adorno navideño pequeño como
ramitas
💗 Cartulina sulfatada blanca
Ahora el paso a paso
Lo que yo quería hacer era ponerle al sombrero la nariz roja como de Rodolfo el reno de Santa y los cuernitos que tienen los renos, esos se los iba a poner en los lados y en el frente iba a ir la nariz. Entonces lo primero que iba a hacer eran los cuernitos y busqué un modelo por Internet y los hice en un papel marrón que tenía en la casa y lo hice varias veces hasta que quedó bien el tamaño porque el primero me quedó muy chiquito.
Después que hice el molde entonces tenía que marcarlo sobre la cartulina metalizada que yo use de color bronce, pero eso también se puede hacer con foamy o con otra cosa que sea durito, pero como en mi casa había de esa cartulina esa fue la que me dio mi mamá para hacer. Entonces marqué los dos cuernos sobre la cartulina por el lado que es blanco que es la parte de atrás. Y los recorté.
Después con esos dos, los marqué sobre la cartulina blanca, pero los recorté por afuera de la línea para que quedaran un poquito más grandes que los marrones o bronce.
Después con la cinta de adhesivo pegué las dos partes, la color bronce sobre la blanca para que quedara como separada. Recorté la tira del adhesivo en varios pedacitos para no gastar tanto, y le despegue el papel verde que trae y después las pegué.
Para hacer la nariz hice también primero un molde que no fue redondo sino que la hice como ovalada pero gordita y después que hice el molde la marqué en la cartulina roja, la recorté y la marqué sobre la blanca y también la recorté por afuera de la marca y con la cinta de pega las pegué las dos.
Ya ahí estaba listo todo lo que le iba a pegar al sombrero y había que poner los cuernitos a los lados que eso lo hice con la pistola de silicón y para pegar la nariz le tuve que doblar la punta al sombrero para que quedara chata y poder pegar la nariz y la pegué con silicón también.
Después en uno de los cuernitos le hice un Adorno con unas ramitas verdes y unas cositas rojas que eso era de un adorno de navidad de la casa, yo nada más se lo pegué y ya así terminé el sombrero que quedó bien bonito.
Bueno amigos eso es todo por hoy, les doy las gracias por leer mis posts y por apoyarme. Chaooo ❤❤💕💕
Hello friends, welcome to my world!
I hope everyone is doing well. I haven't been on the community for a long time because I hadn't made anything nice to show you, but a few days ago my mom found some photos on her phone of when I decorated a Christmas cogoyo hat for a school fair. Even though Christmas is over, it doesn't matter because you can make it for Christmas this year, and since it turned out so nice, I wanted to show it to you.
Well, this hat was for the end of a project when I was in sixth grade, and there was a Christmas fair. To decorate the table, the teacher asked us to make some original Christmas hats, and my mom had the idea to use the one my brother wore for school projects and turn it into a reindeer. Since it was easy, she told me I could do it, and it really is easy and looks really nice. The best part is that kids like me, who was only 11 years old when I made it.
I used
💗 White paper or any other type of paper for making the molds; recycled paper is fine.
💗 A pencil.
💗 Red and brown or bronze metallic cardstock.
💗 Scissors.
💗 Silicone gun.
💗 Double-sided tape for gluing.
💗 Small Christmas decorations such as
twigs.
💗 White sulfated cardstock
Now the step by step
What I wanted to do was put a red nose on the hat, like Santa's reindeer, and the little horns that reindeer have. I was going to put those on the sides and the nose would go on the front. So the first thing I was going to do was make the antlers. I looked for a template online and made them out of brown paper I had at home. I made them several times until I got the size right because the first one was too small.
After I made the mold, I had to trace it onto the bronze-colored metallic cardstock I used, but you could also use foam or something else that's hard. Since we had that cardstock at home, my mom gave it to me to use. Then I traced the two horns onto the cardstock on the white side, which is the back. And I cut them out.
Then, using those two, I traced them onto the white cardstock, but I cut them out outside the line so that they would be a little larger than the brown or bronze ones.
Then, using adhesive tape, I stuck the two parts together, placing the bronze-colored one on top of the white one so that it looked separate. I cut the adhesive tape into several small pieces so as not to use too much, removed the green paper backing, and then stuck them together.
To make the nose, I also first made a mold that was not round but oval-shaped and plump. After making the mold, I traced it onto the red cardboard, cut it out, traced it onto the white cardboard, cut it out along the outside of the mark, and glued the two pieces together with tape.
Everything I was going to stick on the hat was ready, and I had to attach the little horns on the sides, which I did with the silicone gun. To attach the nose, I had to bend the tip of the hat so that it was flat and I could stick the nose on, which I also did with silicone.
Then, on one of the horns, I made a decoration with some green twigs and some red things that were from a Christmas decoration at home. I just glued it on, and that's how I finished the hat, which turned out really nice.
And well friends that's all for today, I thank you for reading my posts and for supporting me. Bye bye ❤❤💕💕
Photography/Fotografía: cortesía de mi mamá | Cover and banner created in/Portada y banner creado en Canva, Translated with www.DeepL.com/Translator (free version)