Greetings friends. The other day someone made me a request for a figurine, it is one of the most beloved characters of the game LOL (League Of Legends). He certainly is an adorable character, you can see that despite where he is in the game, he is love personified in that adorable ball of hair with horns.
Being a request, I made it in flexible dough, a material that will allow it to remain much longer in time and not be damaged, as it is a hard material. In this post I will show you how I made it, join me in the creative process of this cute character.
Saludos amigos. El otro día alguien me hizo una petición de una figurita, se trata de uno de los personajes más queridos del juego LOL (League Of Legends). Ciertamente es un personaje adorable, que se ve que a pesar del sitio en donde está en el juego, es el amor personificado en esa adorable bola de pelos con cuernos.
Al ser una petición, lo hice en masa flexible, un material que permitirá que permanezca mucho más en el tiempo y no se dañe, pues es un material duro. En este post te enseñaré cómo lo hice, acompáñame en el proceso creativo de tan simpático personaje.
Step by step
As I said, this figurine is a request, so I made it with flexible dough. This is white, so I had to mix some paint to color the original white of the material, in this case I didn't have to mix too much, because I only need white (the original), brown, pink and black.
Besides the flexible dough, I used some wire and glue to hold the pieces together.
Paso a paso
Como dije, esta figurita es una petición, así que lo hice con masa flexible. Esta es de color blanco, así que tuve que mezclar un poco con pintura para dar color al blanco origina del material, en este caso no tuve que mezclar demasiada, pues solamente necesito blanco (la original), marrón, rosa y negro.
Además de la masa flexible, usé un poco de alambre y pegamento para mantener unidas las piezas.
Well, I started with this shape that you can see in the image, it is a shape similar to that of a drop of water, with the difference that it is flattened at the bottom, where Poro's legs go.
Once the initial shape was done, I started to make some lines along the piece to achieve that shape similar to the fur.
Bien, comencé con esta forma que pueden observar en la imagen, es una forma similar a la de una gota de agua, con la diferencia de que esta es aplastada en la parte de abajo, donde van las patas de Poro.
Una vez hecha la forma inicial, comencé a hacer algunas líneas a lo largo de la pieza para lograr dar esa forma similar a la del pelaje.
After making the body, which is basically ready, since it is a very simple shape, I continued with the different elements that are part of the Poro's body.
The first thing was its little horns. According to, these horns point up or down depending on their mood, down if they are scared or up if they are excited. For this reason I decided to make them with the horns pointing up.
Another element I made at this point was the tongue. I made it by mixing some white flexible dough with a dab of deep red paint, thus creating this pink.
Después de hacer el cuerpo, que básicamente está listo, pues es una forma muy simple, continué con los distintos elementos que forman parte del cuerpo del Poro.
Lo primero fueron sus cuernitos. Según, estos cuernos apuntan hacia arriba o hacia abajo dependiendo de su estado de ánimo, hacia abajo si están asustados o hacia arriba si están emocionados. Por este motivo decidí hacerlos con los cuernos apuntando hacia arriba.
Otro elemento que hice en este punto fue la lengua. Lo hice mezclando un poco de masa flexible blanca con un puntito de pintura rojo intenso, así se creó este rosado.
Now, to place the horns, I made some holes on each side of the head of the pore, using my knitting needle to make these lines and imperfections seen in the image below, to simulate messy fur around the horns of the pore.
Ahora bien, para colocar los cuernos, hice unos agujeros a cada lado de la cabeza del poro, usando mi aguja de tejer para hacer estas líneas e imperfecciones que se ven en la imagen de abajo, para simular pelaje desordenado alrededor de los cuernos del poro.
So, I began to place all these elements. The horns I simply placed them in the hole I had made in the head of the pore. The tongue on the front, using a little water to glue the materials together, as they are water-based and only this can serve as glue. However, I also used conventional glue to give more support to the pieces.
Así pues, comencé a colocar todos estos elementos. Los cuernos los coloqué simplemente en el agujero que había hecho en la cabeza del poro. La lengua en la parte frontal, usando un poco de agua para pegar los materiales, pues son a base de agua y solo esto puede servir de pegamento. Sin embargo, también usé el pegamento convencional para dar mayor soporte a las piezas.
As you can see in the image above, the one on the right, I also placed the eyes on the little Poro. I did it placing them to a prudential space of the tongue, because the idea is to place between this one and the eyes a sort of mustache.
The idea is not to make it so big, although it is striking, but it does not occupy so much space, just enough to cover part of the tongue and part of the eyes, as you can see in the image on the right below.
Tal como pueden observar en la imagen de arriba, la de la derecha, también le coloqué los ojos al pequeño Poro. Lo hice colocándolos a un espacio prudencial de la lengua, pues la idea es colocar entre esta y los ojos una suerte de bigote.
La idea no es hacerlo tan grande, aunque sí es llamativo, pero este no ocupa tanto espacio, solo lo justo y necesario para cubrir parte de la lengua y una parte de los ojos, tal como pueden ver en la imagen de la derecha que se encuentra abajo.
The last thing I did was to place the paws, which I did by placing small circles with a texture similar to fur, just at the bottom, with three small claws on each paw. Everything is made in flexible dough so it must be left to dry once everything is done. As an additional detail, I placed two little white dots in the eyes, to give a nicer touch to the eyes.
Ya lo último que hice fue colocar las patitas, las cuales hice colocando pequeños circulitos con textura similar al pelaje, justo en la parte de abajo, con tres pequeñas garras en cada pata. Todo está hecho en masa flexible así que debe dejarse secar una vez hecho todo. Como detalle adicional, le coloqué dos puntitos blanco en los ojos, para darle un toque más bonito a los ojos.
This is how the figurine was finished. Below you can see a series of photographs of the final result:
De esta manera quedó terminada la figurita. A continuación pueden ver una serie de fotografías del resultado final:
Well friends, that's all for now. I hope you liked my figurine, because I think it is one of the cutest figurines I've made so far. I invite you to leave your opinions below in the comments, as always I will be happy to read them. With nothing more to add, I'll say goodbye then...
See you next time!
Bien amigos, esto ha sido todo por ahora. Espero que mi figurita les haya gustado, pues me parece una de las figuritas más tiernas que he hecho hasta el momento. Los invito a dejar sus opiniones abajo en los comentarios, como siempre estaré encantado de leerlos. Sin más que agregar, me despido entonces...
¡Hasta la próxima!