Good evening 🌆 family, welcome to another new week and happy sallah celebration to our Muslim brethren.
Today I'm sharing with you how I made this simple free bubu gown.
Material needed, already my Ankara material, lining, shining bayas, elastic rubber, and my tassel.
First thing I did was to cut out the full length of material I needed, but for the back and front.
Then I measure out ten inches from the shoulder down that's where my shape for the hand pit will come out from, then from the shoulder to where will open wide it's sixteen inches, and cut it out then straight down.
After that I cut out my V neck for the front which the length is by seven inches and the wideness by four inches.
The back neck length is by two inches and the wideness also is by four inches.
From there I proceed to cut out my lining for both side.
I fixed in my shining bayas before fixing my lining for the front part.
And I also fix my lining for the back.
After fixing the lining for the both part I iron it, join the shoulder part after that, I fixed my elastic rubber at the hand.
Then I joined everything together fix my tassel and that's all the bubu gown is ready.
Thank you for Checking on my post, wishing you all a fruitful week.