Hola amigos de #Hive y #Hive-Diy, deseo que estén pasando un lindo día, lleno de éxitos y muchas bendiciones. Es un gusto saludarlos una vez más y compartir con ustedes un nuevo proyecto craft, para organizar nuestros lápices, lapiceros u otros accesorios con mucho estilo, se trata de un Estuche o tubo multiuso con temática de Minnie Mouse termoformada. Aquí les muestro cómo hacerlo.
Hello friends of #Hive and #Hive-Diy, I hope you are having a nice day, full of success and many blessings. It is a pleasure to greet you once again and share with you a new craft project, to organize our pencils, pens or other accessories with style, this is a multipurpose case or tube with a Minnie Mouse thermoformed theme. Here I show you how to make it.
- Cartulina con diseños de puntos.
- Goma Eva negra lisa y escarchada, rosada escarchada y blanca escarchada.
- Esfera de tecnopor #4
- Cartón.
- Objeto circular del tamaño deseado.
- Pistola de silicón.
- Lápiz.
- Tijeras.
- Plancha para ropas.
- Cardboard with dotted designs.
- Smooth and frosted black, frosted pink and frosted white eva rubber.
- Technopor sphere #4
- Cardboard.
- Circular object of the desired size.
- Silicone gun.
- Pencil.
- Scissors.
- Clothes iron.
Primero marcamos cuatro círculos de cartón del tamaño deseado en este caso 9 cm de diámetros aproximadamente.
First we mark four cardboard circles of the desired size, in this case 9 cm in diameter approximately.
Montamos un círculo sobre el otro para obtener dos círculos que serán la base del tubo o estuche y la base de la tapa.
We mount one circle on top of the other to obtain two circles that will be the base of the tube or case and the base of the lid.
Luego procedemos a recortar un rectángulo de cartulina con diseños de punto de 30 cm de largo y 18 cm de ancho.
Then we proceed to cut out a rectangle of cardboard with stitch designs 30 cm long and 18 cm wide.
Pegamos la pieza de cartulina con diseño recortada por el borde del círculo de cartón.
Glue the piece of cardboard with the design cut out along the edge of the cardboard circle.
Una vez que ya tengamos hecho el tubo o estuche procedemos a cortar una tira de goma Eva blanca de 5cm de ancho y 30cm de largo y otra tira de 3 cm de ancho y 30 cm de largo con forma semi circular en uno de sus bordes.
Once we have made the tube or case, we proceed to cut a strip of white Eva rubber 5 cm wide and 30 cm long and another strip of 3 cm wide and 30 cm long with a semi-circular shape on one of its edges.
Cuando tengamos estas dos tiras pegaremos primero la blanca por todo el borde inferior del tubo y sobre esta, la tira rosada.
Once we have these two strips, we will first glue the white strip all along the lower edge of the tube and on top of it, the pink strip.
Ya nuestro tuvo terminado y adornado procedemos a armar la cabeza de Minnie Mouse, para esto cortaremos la esfera de tecnopor por la mitad, siguiendo la línea de fábrica y colocamos una mitad sobre un vaso.
Now that we have finished and decorated, we proceed to assemble the head of Minnie Mouse, for this we will cut the technopor sphere in half, following the factory line and place one half on a glass.
Cortaremos un cuadrado de 15 ×15 cm, lo colocamos sobre la plancha caliente y luego lo estiramos sobre la esfera de tecnopor.
Cut a 15 × 15 cm square, place it on the hot plate and then stretch it over the technopor sphere.
Aplicamos silicón por todo el borde de la media esfera y recortamos el excedente de goma Eva.
Apply silicone all around the edge of the half sphere and cut off the excess Eva rubber.
Posteriormente forraremos el círculo que hicimos al principio para la tapa, con goma Eva negra lisa por las dos caras y por el borde pegaremos una tira de 4cm de ancho de goma Eva escarchada.
Then we will line the circle that we made at the beginning for the lid, with smooth black Eva rubber on both sides and on the edge we will glue a 4cm wide strip of frosted Eva rubber.
Terminada la tapa, procedemos a pegar sobre ésta, la media esfera de tecnopor.
Once the lid is finished, we proceed to glue the half sphere of technopor on it.
Cortaremos cuatro círculos de 5 diámetros aproximadamente, montamos uno sobre el oto hasta obtener dos círculos y los forrraremos con goma Eva negra escarchada para hacer las orejas.
We will cut four circles of approximately 5 diameters, mount one on top of the other to obtain two circles and line them with frosted black Eva rubber to make the ears.
Una vez que hayamos terminado las orejas procedemos a pegarlas una a cada lado de la esfera de tecnopor, utilizando dos palitos con puntas, perforamos y aseguramos con silicón.
Once we have finished the ears, we proceed to glue one on each side of the technopor sphere, using two sticks with points, perforate and secure with silicone.
Finalizamos realizando un lazo con goma Eva escarchada rosada, para esto haremos un rectángulo de 5cm de ancho y 10cm de largo, la recogemos en el centro y pegamos una tira de goma Eva blanca.
We finish by making a bow with pink frosted Eva gum, for this we will make a rectangle of 5cm wide and 10cm long, we gather it in the center and glue a strip of white Eva gum.
Pegamos el lazo en una de las orejitas.
Glue the ribbon on one of the ears.
¡Veamos el resultados amigos!
Let's see the results folks!
Gracias estimado amigo lector por quedarte hasta el final de este tutorial, espero que este material haya sido de tu agrado y de gran utilidad. Será hasta otra oportunidad. Dios los bendiga mucho.
Thank you dear reader friend for staying until the end of this tutorial, I hope this material has been to your liking and very useful. I will see you again. God bless you very much.