¡Saludos Comunidad Creativa! | ¡Greetings Creative Community!
Ha llegado el día, hoy es navidad y para celebrarlo les comparto una más de mis creaciones navideñas, pero no es cualquiera sino la que más me ha encantado y este día me parece el momento y la oportunidad perfecta para mostrarlo, se trata de un lindo cascanueces decorativo, el cual es sin duda un gran símbolo representativo de la Navidad, no tenía ningún adorno con esta temática, por lo que este año me propuse hacer mi propio cascanueces y aquí se los presento esperando que les guste, sin más, ¡vamos a crear!
The day has come, today is Christmas and to celebrate it I share one more of my Christmas creations, but it is not just any but the one that I have loved the most and this day seems to me the perfect moment and opportunity to show it, it is a beautiful decorative nutcracker, which is undoubtedly a great representative symbol of Christmas, I did not have any ornaments with this theme, so this year I decided to make my own nutcracker and here I present it to you hoping you like it, without further ado, ¡let's go to create!

Imagen de mi propiedad editada en canva/Image of my property edited in canva

🌟 4 Tubos de cartón de papel higiénico.
🌟 Foami escarchado rojo, dorado, negro y blanco.
🌟 Foami color piel sin escarcha.
🌟 Silicón caliente.
🌟 Regla.
🌟 Lápiz.
🌟 Tijera.
🌟Rubor.
🌟 Pintura negra.
🌟 Corrector de tinta.
🌟 Pincel.
🌟 4 Toilet paper cardboard tubes.
🌟 Red, gold, black and white frosty foami.
🌟 Foami skin color without frost.
🌟 Hot silicone.
🌟 Rule.
🌟 Pencil.
🌟 Scissors.
🌟 Blush.
🌟 Paint black.
🌟 Ink concealer.
🌟 Brush.


🌟 PASO 1. Comenzamos uniendo 2 de los tubos de cartón formando un tubo más grande, luego con la regla medimos y hacemos una marca en el tubo superior dividiéndolo en 4cm abajo y 6 cm arriba.
🌟 STEP 1. We begin by joining 2 of the cardboard tubes forming a larger tube, then with the ruler we measure and make a mark on the upper tube dividing it into 4cm below and 6cm above.





🌟 PASO 2. Recortamos una pieza de foami escarchado rojo con las medidas de un tubo de cartón y cubrimos el tubo de abajo por completo, luego recortamos una pieza de foami de color piel del ancho del tubo de cartón pero de 4cm de alto y lo pegamos sobre el foami rojo, por último recortamos otra pieza de foami escarchado pero ahora en negro y lo pegamos sobre la de color piel, de esta manera hemos cubierto por completo el tubo de cartón doble que será la base o cuerpo de nuestro cascanueces siendo la parte roja el torso, la parte color piel el rostro y la parte negra el sombrero.
🌟 STEP 2. Cut a piece of red frosted foam with the measurements of a cardboard tube and cover the bottom tube completely, then cut a piece of skin-colored foam the width of the cardboard tube but 4cm high and paste it on the red foam, finally we cut another piece of frosted foam but now in black and paste it on the skin-colored one, in this way we have completely covered the double cardboard tube that will be the base or body of our nutcracker being the red part the torso, the skin-colored part the face and the black part the hat.






🌟 PASO 3. Pegamos foami escarchado negro en el borde del sombrero para sellarlo, lo mismo hacemos en la parte inferior pero con foami escarchado rojo.
🌟 STEP 3. We glue black frosted foam on the edge of the hat to seal it, we do the same on the bottom but with red frosted foam.




🌟 PASO 4. Procedemos a formar las extremidades, para ello dividiremos 2 tubos de cartón en 2 piezas cada uno cortando justo a la mitad, luego uniremos los extremos de cada pieza formando unos cilindros delgados, en total serán 4 (2 para los brazos y 2 para las piernas)
🌟 STEP 4. We proceed to form the extremities, for this we will divide 2 cardboard tubes into 2 pieces each, cutting just in half, then we will join the ends of each piece forming thin cylinders, in total there will be 4 (2 for the arms and 2 for the legs)






🌟 PASO 5. Cubrimos las piezas de los brazos con foami escarchado rojo, sellamos ambos bordes con foami escarchado dorado, luego recortamos 2 piezas de foami escarchado dorado del ancho de los brazos y de 3 cm de alto, le hacemos finos cortes de manera vertical y pegamos una pieza en cada parte superior de los brazos quedando los cortes como los flecos de las hombreras, seguidamente cubrimos la orilla inferior de los brazos pegando una tira de foami escarchado dorado de 2 cm de alto.
🌟 STEP 5. We cover the pieces of the arms with red frosted foam, we seal both edges with golden frosted foam, then we cut 2 pieces of golden frosted foam the width of the arms and 3 cm high, we make them thin cut vertically and glue a piece on each upper part of the arms, leaving the cuts as the fringes of the shoulder pads, then we cover the lower edge of the arms gluing a 2 cm high strip of golden frosted foami.







🌟 PASO 6. Para el cabello recortamos 2 piezas de foami escarchado blanco que tengan el ancho de un poco más de la mitad del tubo de cartón y con aproximadamente 4 cm de alto y el otro 3 cm de alto, a cada pieza le hacemos cortes verticales sin llegar hasta la parte superior, luego le aplicamos calor a cada pieza con una plancha de ropa para darle mejor forma al cabello, pegamos la pieza corta sobre la más larga y luego la pegamos sobre la orilla de color piel (el rostro) por la parte trasera, finalmente recortamos una tira de foami escarchado negro y lo pegamos entre la orilla del cabello y el sombrero.
🌟 STEP 6. For the hair, cut out 2 pieces of white frosted foam that are a little more than half the width of the cardboard tube and approximately 4 cm high and the other 3 cm high, at each piece we make vertical cuts without reaching the top, then we apply heat to each piece with a clothes iron to give the hair a better shape, we glue the short piece over the longest one and then we glue it over the skin-colored edge ( the face) on the back, finally we cut a strip of black frosted foam and glued it between the edge of the hair and the hat.








🌟 PASO 7. Luego de pegar el cabello podemos pegar los brazos a los lados del cuerpo (foami rojo) asegurándonos de que el cabello quede por encima de los hombros.
🌟 STEP 7. After gluing the hair we can glue the arms to the sides of the body (red foami) making sure that the hair is above the shoulders.




🌟 PASO 8. Cubrimos las piernas con foami escarchado negro y sellamos uno de los extremos de cada una con foami escarchado negro también, rellenamos las piernas con pequeñas piedras o algo pesado para que el cascanueces pueda mantenerse de pie, aplicamos silicón en la orilla superior de cada pierna y las pegamos en la parte inferior del cuerpo del cascanueces.
🌟 STEP 8. We cover the legs with black frosted foam and seal one of the ends of each one with black frosted foam as well, we fill the legs with small stones or something heavy so that the nutcracker can stand up, we apply silicone on the upper edge of each leg and glue them to the bottom of the body of the nutcracker.






🌟 PASO 9. En foami escarchado blanco hacemos la barba y bigote, los pegamos en el rostro y sobre el bigote pegamos la nariz a la que previamente aplicaremos rubor en todo su borde.
🌟 STEP 9. In white frosted foam we make the beard and mustache, we glue them on the face and on the mustache we glue the nose to which we will previously apply blush all over its edge.




🌟 PASO 10. Recortamos una delgada tira de foami escarchado negro y en el centro le pegamos un pequeño rectángulo de foami escarchado dorado, luego pegamos esta pieza en la parte frontal del cuerpo por debajo de la mitad de los brazos, siendo este el cinturón, decoramos el uniforme a nuestro gusto, yo lo hice pegando 3 círculos pequeños de foami escarchado dorado verticalmente de cada lado y una X que une los 4 últimos.
🌟 STEP 10. We cut a thin strip of black frosted foam and in the center we glued a small rectangle of golden frosted foam, then we glued this piece on the front part of the body below the middle of the arms, being this is the belt, we decorate the uniform to our liking, I did it by gluing 3 small circles of golden frosted foam vertically on each side and an X that joins the last 4.





🌟 PASO 11. Como paso final dibujamos los ojos con pintura negra, una vez que se seque le hacemos unos puntitos blancos con el corrector de tinta y finalmente dibujamos las mejillas con rubor.
🌟 STEP 11. As a final step we draw the eyes with black paint, once it dries we make some white dots with the ink concealer and finally we draw the cheeks with blush.





¡Y listo! De esta manera es como elaboré no 1 sino 2 lindos cascanueces para decorar mi sala en navidad, desde hace mucho que tenia en mente este pequeño proyecto y finalmente este año pude desarrollarlo, me gustó mucho el resultado y espero que a ustedes también, lamento que la explicación sea tan extensa pero quise explicar detalladamente cada paso, de igual forma espero que las fotos puedan servir ademas de la explicación, espero que les haya gustado este tutorial, nos vemos pronto con otra creación navideña, ¡que tengan una feliz navidad!
And ready! This is how I made not 1 but 2 cute nutcrackers to decorate my living room for Christmas, I had this little project in mind for a long time and finally this year I was able to develop it, I really liked the result and I hope you do too, I'm sorry that the explanation is so extensive but I wanted to explain each step in detail, in the same way I hope that the photos can be useful in addition to the explanation, I hope you liked this tutorial, see you soon with another Christmas creation, have a Merry Christmas!













¡Gracias por detenerte a leer!
Todas las fotografías son de mi propiedad.
Fotografías capturadas con mi Samsung Galaxy A12
Separador de texto elaborado en Canva.
Nos vemos en mi próxima publicación.
¡Tengan un feliz día!
¡Thanks for stopping to read!
All photographs are my property.
Photos captured with my Samsung Galaxy A12
Text separator made in Canva.
See you in my next post.
¡Have a happy day!