In order for the life of the asphalt road can last long in duration it needs to start from the process of planning, implementation, up to maintenance. following his explanation.
In the planning process needs to be calculated how the thickness of the layer and the type of material that is suitable to be used according to allotment of the road, for example the road that will be passed by large vehicles such as trucks will certainly be different bebanya with that passed by two-wheeled motorcycles. well .. the load difference needs to be prepared also thick strong road. the next problem of using the type of asphalt qualified to adjust the road conditions so that later not easily damaged. in the planning can also be estimated the age of the road.
In the implementation process it is important to note that what has been planned before can be properly implemented. next to note the quality of the work, such as setting the slope of the road to rain water can come out without causing puddles. because the asphalt can be damaged immediately if there is stagnant water, initially it is only a small hole but for a long time can enlarge /
so that the layer can be asphalt can last long then can pay attention to things following.
1.Make sure the vehicle passing on it does not exceed the load that the road structure can bear.
Make a good drainage so that water can get out of the asphalt layer immediately.
immediately make improvements if there is a layer of road that is damaged, the material can use asphalt material itself.
Then in this case what is asked is edge care, it can be done by making sure there is no stagnant water on the road. and can be added with road pavement using concrete which is a mixture of sand and cement, but still pay attention to the smoothness of drainage. thinner and zamitex are used for paint so can not be used to treat the asphalt road.
That's some explanation on how to strengthen or extend the life of the asphalt road layer, hopefully durable and durable.