Alambrismo - Special for Children

Greetings Steemians, if you liked the nice tendril of the previous post, if you want your children to learn to make animals with wires, help them to follow the step by step, they are very simple, I am sure that if they work in teams in less than 10 minutes they will have a spider like the one I did.
Let's go, little friends, ask dad or mom to help you cut 6 wires to make a spider like the one you'll see next.

The materials to use:

Cutting clamp
Wire No. 20, can be copper or aluminum
A metra or marble and a small ball or bill
Ruler or tape measure

Step 1. Cut four wires N ° 20 of 25cm and two of 10 cm, to measure you can use the ruler or a tape measure.

Paso 2. Once you have made the cuts, group the four wires of 25cm and calculate or measure half of them, then with one of the wires 10 cm, you will wind around the four wires to hold them well.

Step 3. They should be as you see below.

Step 4. Open the wires well to wrap the meter or marble.

Step 5. You are accommodating the four wires to be able to tie them again more easily, the meter or marble will be well adjusted.

Step 6. Verify that everything is fine, select two wires to pass through the hole in the ball or account smaller.

Step 7. Now you take a wire at the same time of the two that you passed through the ball or count, and you are twisting it from the tip towards it.

Step 8. With the remaining wires you will form their long legs, first you separate and shape each of the remaining wires.

Step 9. Find a special place for your spider, you can decorate your room or give it to a friend, you will surely like it.

I appreciate that you take a bit of your time to follow the step by step of this guide, I hope you have been to your liking and that you can make all the spiders you want.

Step by step guide authorship of Hive account@erondon