Tribute to Karl Lagerfeld - Part 3 - Programming the Laser

Step three:
It's time to work on the engraving software, that's a most tricky part.
The engraving software is meant to engrave simple logos on tools, plate of knife for exemple it was not designed to engrave for long hours with many vectors on the screen.
This is usually here that the problems starts ...
For this engraving everything went smoothly, I've developed some tools to help me and avoid all the problems.
Here is the result:

Those are millions of vectors shaping the face of Karl Lagerfeld, now the computer attached to the laser machine can crash anytime.

Here is the result with the vectors filled with grey shades:

For the next step I will start to engrave.

Follow this Project:
➡ Tribute to Karl Lagerfeld - Part 1 - The design
➡ Tribute to Karl Lagerfeld - Part 2 - Create Vectors on Illustrator
➡ Tribute to Karl Lagerfeld - Part 3 - Programming the Laser
➡ Tribute to Karl Lagerfeld - Part 4 - Let's make a sample
➡ Tribute to Karl Lagerfeld - Part 5 - Start the Laser Engraving
➡ Tribute to Karl Lagerfeld - Part 6 - Stunning Result !!!

Thanks a lot for reading,

SkarNoze

—————————————————————————
Follow my Laser Engraving Journey:
➡ https://steemit.com/@skarnoze
➡ https://www.facebook.com/SkarNoze/
➡ https://www.skarnoze.com