Today we are going to learn how to make a 3 Perc Mason Jar Bubbler.
You Will Need:
3 Mason jars.
A thin Screwdriver.
A thick screwdriver.
A plastic tube.
Beeswax.
A bowl with a downstem.
To build the 3 perk mason jar bong you simply need to start with a mason jar. Use the thin screwdriver to poke a pilot hole into the lid of the jar. Make sure to avoid the middle because you are going to eventually make 2 holes.
Once you make a pilot hole you should be able to just push the bowl with the down stem directly into the jar lid {above.}
Next step is to cut a section of plastic tubing.
Notice how the second jar has the tubing in deep and the first jar has the tubing in shallow. This is very important. Getting the tubing into the jar lid is easy. Once again use to the screwdriver to poke a pilot hole. Then use the thick screwdriver to make the pilot hole much bigger. The goal is to make a hole very slightly smaller than the plastic hosing.
The third mason jar is configured in the exact same way. Use this picture as a guide. The yellowish stuff on to is beeswax which works wonders to seal the tubing and down stem. To fill the mason jars with water: Simply pour water into the tube you would take hits from. Then carefully blow water through the other two mason jars. I find gentle pressure pushes water into the middle jar and strong pressure pushes it straight into the last jar.