Hey guys, its Gingy,
Today I'm going to tell you how to build a clone box for under $40 its really simple and all you need are a few things you can get at home depot and your local fountain and pound stores.
things you need
a tote, you can buy this at wal mart for around $5
3 low spray sprinkler heads you can get them as low as $.89 at home depot.
caulk and gun you can get that at home depot as well
240 gph small water pump or bigger
exacto knife
6.clear tubing
(set up)
ok so once you get home with all the things you need start out by marking where you want your holes for clones you need to have a hole to put water in and a hole to drain water out inside connect the sprinklers to the walls of the tote by poking them through. next connect them to the hose and connect the hose to the pump and plug the drain hole. next your going to want to use the caulk to seal the lid to the tote so it doesnt leak. let dry for 12 hours and then add water and nuits then plug the pump into a power sorce sprinklers should start up. next add your plants and there you go you now have a clone box.
