Habedere everyone,

today I show you the spacers which will be between the mod and the wall.

If you missed the 2nd part (frame); here it is:
https://steemit.com/casemodding/@theguymasamato/project-casemod-hardware-wall-frame

After I finished the frame, I started to work on the spacers.
They were made out of cardboard tube.

First I marked the cutouts on the tube.

Then I cut everything and leathered the tube with black imitation leather

I cut the top of the tube out of a piece of scrap wood with a hole saw and sanded them on the drill

The top was leathered with white imitation leather

And this is the result.
Frame + spacers

What's next?

I'm going to start to work on my MDF main panel.
Servus and cu next time.