The ESTeem Model HD-2017 is designed for the rigors of the Industrial, Public Safety, and Federal markets, is the next generation wireless modem with two Ethernet ports and one independent Serial RS-232C data port . The Model HD-2017 provides wireless networking with an RF data rate of 1 to 54 Mbps, at a nominal 5 to 10+ mile range depending on the ANTenna used.
Now you have greater bandwidth for all your control, video, and VoIP needs, on one radio channel. Wireless networks over large geographical areas become a reality using the HD-2017 Access Point Mode with the Self-Healing MESH feature. HD-2017 products have a Client Mode so it can be used in mobile applications under a HD-2017 radio canopy.
ESTeem Model HD-2017: 4.9 GHz
Licensed, 54 Mbps, Ethernet and Serial
Features
MESHing Self Healing Network Architecture
5 to 10+ Mile Nominal Range
Industrial Hardened Case
Direct Outdoor Pole Mountable
Extended Temperature Specifications
Power over Ethernet Cable (PoE)
Dual Ethernet Ports
Serial RS-232 Communications Port
Modes of Operation
Ethernet Bridge Mode
Point-to-Point
Point-to-Multipoint
All Bridges can be Repeaters
Available in all Access Point and Bridging Modes
Access Point (AP)
AP/Bridge, Router and Masquerade
Client Modes (Mobile)
EtherStation
Station Router
Station Masquerade
Security
AES Encryption (CCMP)
Temporal Key Integrity Protocol (TKIP)
128/64 Bit WEP Encryption
Access Control List (ACL)
195E 4port Front PanelWireless High Speed Ethernet and Serial Ports
Model 195Ep Reduces Site Costs
Outdoor case design. The new NEMA 4 case design and weatherproofing kit allows the unit to be indoor or outdoor pole mounted in harsh environments. This feature eliminates the enclosure costs needed with other radios
Eliminates costly RF feed lines. Direct pole mounting eliminates feedline cost and high signal losses.
Lower installation costs. Simple pole mounting saves installation time and expense.