The default IP for the DR-2 model is 192.168.1.200. If your router is within 192.168.1.* range, you will probably just need to plug in an Ethernet cable and power it up, and go to http://192.168.1.200 with password admin to configure the machine.
The default IP for the DR-2 model is 192.168.1.200. If your router is within 192.168.1.* range, you will probably just need to plug in an Ethernet cable and power it up, and go to http://192.168.1.200 with password admin to configure the machine.
RE: Starting up and Running a Pinidea DR-1 using a Raspberry Pi3 with Minera (LONG + Lots of pics)