Acompañame a hacer manualidades con foami / :D
Join me to make handicrafts with foami
Como materiales usaremos:
- Foami o goma eva de color amarillo, verde y marrón.
- Tijeras, silicón, y un color naranja.
Hi!! I've been making decorations for my birthday which has a sunflower theme (my favorite flower) and I wanted to share with you a little bit of how I made these little foami flowers.☝️
As materials we will use:
- Foami or eva rubber in yellow, green and brown.
- Scissors, silicone, and an orange color.
☺️
¡Comencemos! / let's start!
- 1 : We make a mold in paper with the shape of an star but with 6 points, and we mark over the yellow foami.
2: We cut out our figures and with an orange color we paint over the foami from the middle to the tips.
3: with an iron, it can be a clothes iron or a hair iron like the one I am using, we heat it to the maximum, and we make pressure tip to tip of our figure until it gets hot.
4: When the foami is hot, we make a pressure with our fingers as shown in the image.
5: We repeat this with all the tips and with all the figures until we have a shape like the one shown in the image and we continue to arrange and glue two by two, one on top of the other.
Following the image aside: ←
- 1: We cut from the brown foami strips of approximately 1cm wide.
- 2: We make small cuts all over the strip as shown in the picture.
- 3: Roll up with the cuts facing upwards.
- 4: We open well the small cuts to give it shape.
- 5: And finally we glue in the middle of our flower.
Following the image aside: ←
- 1: In the green foami we trace small leaves and cut.
- 2: We do the same procedure of heating with the iron.
- 3: when it is warm enough we flatten it as shown in the picture.
- 4: arrange around the flowers and glue underneath.
And that's it, we have cute self-made foami sunflowers! :D
- 1: Hacemos un molde en papel de forma de etrella pero con 6 puntas, y marcamos encima del foami amarillo.
2:Recortamos nuestras figuras y con un color naranja pintamos encima del foami de medio a puntas.
3: con una planca, puede ser de ropa o de cabello , la calentamos a lo mas miímo, y hacemos presión punta po punta de nuestra figura hasta que se caliente.
4: Cuando esté caliente ya el foami hacemos una presión con nuestros dedos como se ve en la imagen.
- 5: Repetimos eso con todas las puntas y con todas las figuras hasta que nos queden con forma como la que se muestra en la imagen y proseguimos a acomodar y pegar de dos en dos, una encima de otra.
Siguiendo la imagen de arriba:☝️
- 1:Cortamos del foami marrón tiras de aproximadamente 1cm de ancho.
- 2: Hacemos pequeños cortes por toda la tira como se ve en la imagen.
- 3: Enrrollamos con los cortes hacia arriba.
- 4: Abrimos bien los pequeños cortes para darle forma.
- 5: Y finalmente pegamos en el medio de nuestra flor.
Guiandonos de la imagen de arriba: ☝️
- 1: En el foami verde trazamos pequeñas hojas y cortamos.
- 2: Hacemos el mismo procedimiendo de calentar con la plancha.
- 3: cuando este lo suficientemente calliente aplastamos como se ve en la imagen.
- 4: acomodamos al gusto al rededor de las flores y pegamos por debajo.
¡Y listo, tenemos lindos girasoles de foami hechos por nosotros mismos! :D
Gracias por leer /
Thanks for reading.