Working On this project for FIP:

Smart Chair parking ideas by understanding the technology of Nissan:
Things used in this project
Hardware components
Cooler

×   1       
Medium-Density Fiber (MDF) Board, 1/4-Inch

×   1       
Wood, 1"x2"

8 Ft
× 1
Wood, 1"x3"
8 Ft
× 1
Wheel, 6-Inch

×   2       
Swivel Caster

×   1       
Geared 12V DC Motor

×   2       
Shaft Hub, 4 mm

×   1       
Arduino Uno Board   ×   1       
Turnigy 2200mAh 3S 20C Lipo Pack

×   1       
Portable USB Charger

×   1       
L298n Motor Driver

×   1       
Breadboard (generic)

×   1       
Parallax PAM-7Q GPS Module

×   1       
Adafruit HMC5833l Compass

×   1       
HC-05 Bluetooth Module

×   1       
M3 Nuts and Bolts

×   4       
M5 Nuts, Bolts, and Washers

×   2       
#4 x 1" Nuts and Bolts

×   8       
#6 x 1" Wood Screws

×   6       
#10 Nuts, Bolts, and Washers

×   6       
1/2" Washer

×   2       
Nails, 1"

×   30      
Jumper wires (generic)

×   1       
USB-A to Micro-USB Cable

×   1       
Picture Hanging Command Strips

1 Pack
× 1
Software apps and online services to play the project:
Arduino IDE

Blynk

Hand tools and fabrication machines used in project:
Soldering iron (generic)

Saw

        
Electric Drill

        
Jigsaw

        
Hammer

Circuit Diagram of project:

Here is the video link for programming and project description:

Here you will get the idea what can we try to make:

If you have any suggestion and information regarding this then comments
Hope you like it.