There doesn't seem to be a 3d printable EOS Logo out their, well that will change today.

Edit: STL file on Thingiverse

I thought it would be a nice idea to create a 3d printable EOS logo since I really love the shape!
The logo has been designed using Fusion360 and here are the steps.

1. Equal sided triangle (Bottom and sides)

The bottom and side shapes are equal length sided triangles. Easiest way to draw those are by finding the intersection of two circles.

Once done I drew two support lines to determine the middle. I will need that for the top later on.

Next are the triangles on the side. Those are at an angle, I didn't find the exact angle so I just used an angle I thought looks close the original.

To place the sketch at an angle I used the Plane to Angle tool and selected the first side of the bottom triangle.

Than it is a repetition of the first step. Draw two circles and connect the intersection.

The Result for all three sides looked like this.

2. Upper Triangles

Remember the center point on the first sketch? We need that now for the starting point of the upper Triangle.
First thing however is to create an Offset Plane at the hight of the chestahedron.

With the point I could now easily connect the other points at the top of the triangles.

3. Bring sketch to live with using the pipe tool

With the sketch completed the last thing left to do is to apply a pipe modifier that will bring the sketch to live.

I hope you found this tutorial useful. This design has been uploaded to Thingiverse for free download!

The SBD rewards of this post will be invested for EOS token.

Thank you!