FDA diode laser freezing point hair removal machine, multiple wavelength options, high power output, painless permanent hair removal, safe and comfortable.
Article source: https://www.litonlaser.com/professional-fda-diode-laser-freezing-point-permanent-hair-removal-machine/
Although autumn and winter are the best seasons for laser hair removal, many people choose laser hair removal before summer arrives, and it has become a popular beauty project.
Below, Litonlaser has sorted out the medical and aesthetic knowledge of laser hair removal to review and review the technology of laser hair removal, a hot beauty project!
Freezing point hair removal is currently the most advanced permanent laser hair removal method. Based on the principle of selective photothermal action, it uses freezing point diode laser hair removal equipment . The laser penetrates the surface of the skin to keep the hair follicles at a certain temperature, gently inactivates the hair follicles and surrounding stem cells, and achieves the purpose of permanent hair removal. It can remove excess hair on a large area without pain and coolness, effectively protect the surrounding skin, and achieve the purpose of rapid hair removal.
- Principles of Ice-Point Diode Laser Hair Removal.
1.1 Principle of Laser Hair Removal.
Similar to the treatment of pigment spots and blood vessels, laser hair removal is also based on the principle of selective photothermal action. When the laser penetrates deep into the dermis, the melanin in the hair follicles and hair shafts will selectively absorb the laser, thereby generating heat.
However, unlike the treatment of pigment spots and blood vessels, the pulse width of the laser used for hair removal is wider than the thermal relaxation time of melanin, because our target tissue is not melanin. Current research believes that the vascular nerves in the hair papilla during the growth period, the hair matrix cells with strong differentiation ability in the hair bulb (called matrix above the hair papilla), and the hair follicle stem cells in the bulge of the hair follicle are the three important target tissues for permanent hair removal. The thermal relaxation time of the hair follicle is 40-100ms. The heat energy diffused from the melanin is transmitted from the hair shaft to the stem cells of the outer sheath of the hair bulb, destroying the germinal layer of the hair follicle, thereby achieving the purpose of accurately destroying the hair follicle structure.
Freezing point hair removal picture
1.2 Principle of Ice-Point Hair Removal.
Ice-point laser hair removal uses the gold standard 808/810 nm semiconductor laser for laser hair removal. Through a specially designed dual-pulse laser, it irradiates the skin with only a low energy density. The first laser pulse through the epidermis heats the skin tissue and hair follicles. The second pulse selectively raises the temperature of the hair follicles to about 45 degrees. The sliding 10Hz laser ensures that the hair follicles maintain this temperature for a period of time, and the hair follicles and growth stem cells lose their growth activity, thus achieving permanent hair removal.
The biggest difference between ice-point hair removal and traditional laser hair removal in mechanism is that traditional laser hair removal requires instantaneous high energy to burn the hair follicles, while ice-point hair removal gently inactivates the hair follicles automatically, so it can achieve the purpose of permanent hair removal without over-stimulating the skin to avoid pain or risks.
- Energy setting and operation points of diode laser hair removal.
Diode laser is one of the most commonly used hair removal devices, with a wavelength of 800-810nm. The most famous “moonlight hair removal” and “freezing point hair removal” are semiconductor lasers. The 810nm band is traditionally deeper, and the melanin absorption is moderate, which is more friendly to people with dark skin.
The commonly used “freezing point hair removal” is mostly sliding. Due to the heat conduction of cold gel and the cooling of sapphire in the handle, customers usually feel better.
In terms of parameter setting, there will be east mode and professional mode, which can be selected according to needs. Usually the energy density is 10-13J/cm². Single-site operation should not be done according to the operation interface. It can be operated for about 30-40s, otherwise the risk of burns is relatively high. The diode hair removal machine is suitable for hair removal of large parts such as chest, back, limbs, etc., and it is more comfortable.
Operation skills: The treatment handle is held vertically and close to the skin and a certain amount of force is applied. Diode hair removal is generally used for large areas. The local area (upper arm/calf/thigh) can be divided into three areas. During treatment, the gel needs to be added and replaced to dissipate heat. During treatment, slide quickly without pausing, and slide faster in areas with thinner skin.
- Three major advantages of freezing point hair removal.
3.1 Really painless.
No need to burn hair with high energy instantly, only warm feeling, no pain, with full white sapphire/sapphire cooling, hair removal is as comfortable as warm stone massage.
3.2 Really fast.
Adopting professional In-motion sliding technology, bid farewell to traditional dotting operation, with a repetition frequency of up to 10Hz, the hair removal speed is increased by 5 times.
3.3 Really safe.
Adopting 10J low energy density, 20ms long pulse width, and full cooling system, the probability of side effects is almost reduced to zero.
- Precautions for freezing point hair removal.
Shave the hair in the treatment area;
Apply the glue on the skin;
Stick the light-guiding crystal to the skin surface for operation;
First make three test spots, and then observe the immediate reaction of the skin. The normal reaction is that the skin or the hair roots are slightly red, and sometimes there is a burnt smell;
When the energy density needs to be adjusted, the increase should not exceed 2J each time;
For people with darker and more sensitive skin, it is common for the skin to have a delayed reaction within 24-48 hours. The energy density should not be increased arbitrarily because the immediate reaction is not obvious;
Post-freezing point hair removal care: cold compress (not ice compress, not less than 4℃) for ten minutes to half an hour until the discomfort is relieved; try to avoid sun exposure; if there is no side effect on the skin, makeup can be applied. - Specific steps of diode laser freezing point hair removal.
Step 1: Skin preparation. The technical term is skin preparation, and in layman’s terms, it is called shaving, that is, use a disposable hair removal knife to shave all the hair on the surface of both arms so that the light waves can “pull out the hair roots” during hair removal. Before skin preparation, please keep the hair removal area clean to ensure the effect.
Step 2: Cold gel. Apply a gel with cooling and refreshing effects to the hair removal area to maximize the protection of the skin and minimize the discomfort during the hair removal process. Make sure there is no hair on the inside of the arm, and you can also evenly apply an appropriate amount of gel. When hair removal, it will be “closely contacted” by the light waves to achieve the effect of tightening the skin.
Diode laser freezing point hair removal operation steps
Step 3: Freezing point hair removal. Repeatedly contact the hair removal area with uniform force, allowing the light waves to thoroughly “encircle and suppress” the hair roots. As the intensity of the light increases, the skin will feel more and more intense. Different light waves are used, and the area of hair removal and pain are different each time: the area of freezing point hair removal is larger and there is no pain.
Step 4: Cleaning. Gently scrape off the gel and wash with clean water. After washing, quickly moisturize the skin and apply sunscreen. Do not use soap or other alkaline cleaning products to take a bath one week after hair removal.
- Choice of diode laser hair removal machine.
In the hair removal market, laser hair removal occupies most of the market, and diode laser hair removal is the most mainstream hair removal beauty project. Due to the climate and population in Europe, hair is more abundant, so hair removal projects are more popular.
A good hair removal project needs to be matched with a good hair removal machine. For diode hair removal machines, Litonlaser, as a beauty machine manufacturer with 20 years of experience, has excellent diode laser machine production technology. We produce many high-quality diode laser machines through strict control of power, certificates, wavelength, laser bar, etc.
Our diode laser hair removal machines have FDA certificates, CE certificates and other certificates, and are certified by professional organizations to ensure the effect and quality of the machine.
In terms of wavelength, we provide single-wavelength lasers of 808 nm/810 nm, three-wavelength lasers of 755 + 808 + 1064 nm, and four-wavelength laser machines of 755 + 808 + 940 + 1064 nm.
In terms of machine power, the power of diode laser, we specifically refer to the power of laser bar. Litonlaser has multi-power diode laser machines such as 350W, 600W, 800W, 1200W, 2400W, etc. The appearance ranges from small portable machines to large vertical machines. You can choose according to the preferences of different customers and the needs of different markets.
If you need to know more about diode laser hair removal machines, you can contact us at any time: Medical beauty machine supplier .