The 2019 vario motorbike had a serious accident until the chassis bent. This motorbike hit a truck carrying bricks from behind so the only part that was badly damaged was the front of the speedometer, if the other parts of the body only had minor abrasions so it was very easy to repair, but in the damaged chassis it was not easy to repair, because in this section requires a really detailed accuracy.
How to fix a bent chassis like this I usually use the press technique, usually the costs needed range from above 300 thousand to under 500 thousand.
When the frame of the motorcycle is not straight, so that the road motor will not be normal, things like this are very dangerous if the motorbike is used on a busy highway with other vehicles, the consequences are very fatal.
For the chassis press process it doesn't take long, it only takes about 2 hours, if you have to do the burning method it will only take more than 2 hours.
This is the condition of the motorbike after I opened all the bodies, the most striking damage was at the bottom of my friend's feet, the distance between the floors was only 3cm, the standard of this motorbike was about 20cm.
It's not just the chassis that's bent, there's also the 3rd branch that has bent about 10cm inward. And in the shock part it is also bent 11cm inward, it can be ascertained that if some of these parts are bent due to impact, there is no doubt that the handlebar bearing is destroyed and the seat is dented.
The time and cost is definitely more than 500 thousand, it's just for pressing in some parts, not including replacing the body part of the speedometer and the body in other parts.