practice directly on my own friend's speaker, which is broken in the TWEETER speaker.
before I explain about how to repair a damaged speaker, let me first explain about the damaged TWEETER in this speaker box.
tweeters
Tweeter is a speaker that is usually the smallest size among other speakers, the smallest size and we see it most often is 0.5 inches, and the largest is 4 inches, the size depends on the brand, its frequency coverage capabilities, and its usability .
The function of the tweeter speaker is to reproduce high-frequency sounds, which cover the range from 3500 Hz to 20 Khz. Examples of these high-frequency sounds include vocals, cymbal drums and the tinkling sound of other musical instruments.
Tweeters are further divided into two types based on the drivers they have, namely piezo tweeters and magnet tweeters. Besides being an audio component in the music world, tweeters are also often and widely used by swallow breeders to imitate the sound of swallows, because the sound produced from the tweeter is very loud, like the sound of a swallow that has no bass sound.
SPA
Antes de explicar cómo reparar un altavoz dañado, permítame explicarle primero el TWEETER dañado en esta caja de altavoz.
tweeters
Tweeter es un altavoz que suele ser el tamaño más pequeño entre otros altavoces, el tamaño más pequeño y lo vemos con mayor frecuencia es de 0.5 pulgadas, y el más grande es de 4 pulgadas, el tamaño depende de la marca, sus capacidades de cobertura de frecuencia y su usabilidad.
La función del altavoz de agudos es reproducir sonidos de alta frecuencia, que cubren el rango de 3500 Hz a 20 Khz. Ejemplos de estos sonidos de alta frecuencia incluyen voces, tambores de platillos y el tintineo de otros instrumentos musicales.
Los tweeters se dividen en dos tipos según los controladores que tienen, a saber, tweeters piezo y tweeters magnéticos. Además de ser un componente de audio en el mundo de la música, los criadores de golondrinas también utilizan a menudo y ampliamente los tweeters para imitar el sonido de las golondrinas, porque el sonido producido por el tweeter es muy fuerte, como el sonido de una golondrina que no tiene sonidos graves.
I will share a very simple way to find out if the speaker is damaged, the method that sara gives this time is by not using a multimeter or oscilloscope or other special audio equipment, this method is a very simple method and can be done directly at home and without complicated .
As most people out there know before that audio was created to spoil the ears or listen to music at a loud volume, from here we can and very easily detect the damage just by listening to the sound, without having to disassemble it first.
SPA
Voy a compartir una forma muy sencilla de averiguar si el altavoz está dañado, el método que da Sara esta vez es no usar un multímetro u osciloscopio u otro equipo de audio especial, este método es un método muy simple y se puede hacer directamente en hogar y sin complicaciones.
Como mucha gente sabe antes que el audio fue creado para estropear los oídos o escuchar música a un volumen alto, desde aquí podemos y muy fácilmente detectar el daño con solo escuchar el sonido, sin tener que desmontarlo primero.
Here's a very simple way and the one I do most often to find faulty speakers:
- Turn on your audio device.
- Play favorite songs, use slightly noisy songs or DJ music
- Set the volume at the lowest position, only set what is important can still be heard
- Then put your ear closer to the speaker and hear the sound
- If you hear a defect, or a "crack, krek, grunt" sound appears, or the sound of the speaker becomes hoarse and wet, it means that the speaker is damaged.
Speakers that are still normal will not cause sound defects even if the volume position is placed at the lowest position though.
In this kind of speaker damage, when the device is played with the middle volume position, it will not cause sound defects, but it will sound disabled when in bass tone.
Easy and simple right?
Hopefully this article on how to find a faulty speaker is useful for all readers.
SPA
Aquí hay una forma muy simple y la que uso con más frecuencia para encontrar altavoces defectuosos:
- Encienda su dispositivo de audio.
- Reproduce tus canciones favoritas, usa canciones ligeramente ruidosas o música de DJ
- Establezca el volumen en la posición más baja, solo configure lo importante que aún se puede escuchar
- Luego, acerque la oreja al altavoz y escuche el sonido
- Si escucha un defecto, o aparece un sonido de "crack, krek, gruñido", o el sonido del altavoz se vuelve ronco y húmedo, significa que el altavoz está dañado
Sin embargo, los altavoces que aún son normales no causarán defectos de sonido incluso si la posición del volumen se coloca en la posición más baja.
En este tipo de daño de los altavoces, cuando el dispositivo se reproduce con la posición de volumen medio, no causará defectos de sonido, pero sonará desactivado cuando esté en tono grave.
Fácil y simple, ¿verdad?
Esperamos que este artículo sobre cómo encontrar un altavoz defectuoso sea útil para todos los lectores.