Hello community, I think we could all say that one of the few things that makes driving more enjoyable is listening to music while we do it, also listen to radio programs, in my case both, but for some time now I have only been able to listen to music when I link my phone via bluetooth, I have not been able to listen to the radio anymore, so I decided to check what would be the reason, because it is something I enjoy quite a lot.
El equipo de música de mi vehículo no sintoniza emisoras | Diagnostico
Saludos comunidad, creo que todos podríamos decir que una de las pocas cosas que hace conducir mas placentero es escuchar música mientras lo hacemos, también escuchar programas de radio, en mi caso ambas, pero de un tiempo para aca solo he podido escuchar musica cuando enlazo mi teléfono via bluetooth, no he podido escuchar mas la radio, asi que me propuse a revisar cual seria la razon, porque es algo que disfruto bastante.
I set out to check if I moved any wires by accident, since some time ago I was also working on the ignition of the car, I disassembled part of the panel and removed some connections, I thought it was the reason from the beginning, so I went directly to check this, but after a long check and several tests I still could not tune any station.
Me dispuse a revisar si movi algún cable por accidente, ya que hace un tiempo también estuve trabajando en el encendido del carro, desmonte parte del tablero y retire algunas conexiones, pensé que era la razón desde el principio, por eso fui directamente a revisar esto, pero luego de un largo chequeo y de varias pruebas aun no podia sintonizar ninguna emisora.
I thought that the radio had already broken down, but after analyzing it I discarded that option, since the bluetooth device that I use connects to the radio through an FM signal that emits and that I must tune in the car stereo, this works well, which led me to the conclusion that it was not the equipment, so I set out to check the antenna.
Pensé que el radio ya se había averiado, pero luego de analizarlo descarte esa opción, ya que el dispositivo bluetooth que utilizo se conecta al radio a través de una señal FM que emite y que debo sintonizar en el estereo del carro, esto funciona bien, lo que me llevó a la conclusion que no era el equipo, fue asi como me dispuse a revisar la antena.
I discovered that at some point when passing through some place the antenna received a blow because it looked bent, I disassembled it and indeed it was so, to the point that the lower part which is a spring was bent. The base of the spring is quite rusty, because it lost the plastic protection that insulates it after the blow, I thought that was the reason for not being able to tune the radio stations.
Descubrí que en algún momento al pasar por algún lugar la antena recibió un golpe porque se veía doblada, la desmonte y efectivamente fue así, al punto que la parte inferior que es un resorte estaba doblado. La base del resorte está bastante oxidada, debido a que perdió la protección plástica que la aísla luego del golpe, pensé que esa era la razón de no poder sintonizar las emisoras de radio.
After cleaning the rust the problem persisted, it was where I thought that due to the blow, the cable that runs through the antenna from the tip, somewhere was cut, so I removed the plastic cover of the antenna where you see one end of the cable, and as I discovered more to remove the plastic cover, I found that the thin copper filament that serves as an antenna was had been cut.
Luego de limpiar el óxido el problema persistía, fue donde pensé que debido al golpe, el cable que recorre la antena desde la punta, en algún lugar se corto, asi que retire el cobertor plástico de la antena donde se ve uno de los extremos del cable, y a medida que descubría mas al retirar el cobertor plástico, encontré que el delgado filamento de cobre que sirve de antena estaba se había cortado.
I immediately knew that repairing it would not be easy, so the first thing I did was to test if there is continuity between the base of the antenna that is screwed into the body, to the end of the copper filament where it was cut, determining that there was continuity, which encourages me to be able to repair it.
De inmediato supe que repararla no sería sencillo, así que lo primero que hice fue probar si hay continuidad entre la base de la antena que se enrosca en la carrocería, hasta el extremo del filamento de cobre donde se cortó, determinando que si había continuidad, lo que me alienta a poder repararlo.
But to protect it from the elements was my other concern, so I looked among my things to see what heat shrink I have to insulate it, but unfortunately I only have 0.4mm and it is not possible to pass the antenna through, and the other one I have is too big of 20mm and when it shrinks it does not fit well, so the repair will be for the moment I have the right heat shrink.
Pero protegerlo de los elementos era mi otra preocupacion, asi que busque entre mis cosas a ver que termoencogible dispongo para así poder aislarlo, pero lamentablemente solo tengo de 0.4mm y no es posible pasar la antena a través, y el otro que tengo es demasiado grande de 20 mm ya al encogerse no queda bien ajustado, así que la reparación quedará para el momento que tenga el termoencogible adecuado.
In the meantime I put the antenna of another vehicle in the house that is stopped due to other problems. With this antenna it worked very well and I can listen to my radio programs while I repair the other antenna, soon I will bring you the results.
Mientras tanto coloque la antena de otro vehículo de la casa que está parado por otros problemas. Con esta antena funcionó muy bien y puedo escuchar mis programas de radio mientras reparo la otra antena, pronto les traere los resultados.