IN ENGLISH:
Hello friends, there is a saying that says "No one takes care of someone else's" In reality that is true, when we lend our tools or equipment they always return them with defects, I tell you that a year and a half ago, my daughter traveled to Brazil and left the apartment to a friend, only for a year while she returned, well friends, three days ago my daughter's friend called us to deliver the apartment, BUT, she delivered it with a damaged refrigerator, an air with a damaged compressor, what do you think? does this look like? I think that my daughter's friend should have notified the damage to this equipment and at least collaborated with the repairs.
Well friends, now I have to repair or have these equipment repaired, yesterday I started to review the different components of this refrigerator, this refrigerator is a General Electric vertical model, which I bought 23 years ago and 6 years ago we gave it to my daughter Actually, I am not an expert in refrigeration, but I know all the parts of this refrigerator. During these 23 years it has only failed because of the bimetal, because this part is always getting damaged. Once I changed the compressor fan and On another occasion I changed the clock, I have done all these repairs myself, it is actually a very simple refrigerator.
Trying to locate a fault in my daughter's refrigerator
Well my friends, I tell you that I have checked several components and I still have not been able to find the fault, the symptom that the refrigerator presents is the following:
The symptoms that the refrigerator presents:
It cools in the freezer area, but does not reach the freezing point, that is, it does not freeze the food in that area, nor the ice trays.
The food preservation area feels cool, but it needed to cool down a little more.
Refrigerator review.
Generally when a refrigerator stops cooling in the food preservation area and it feels cold in the freezer but does not freeze, we immediately think that the bimetal is responsible, although it could also be the defrosting resistance, but the first thing we check is the bimetallic one, so taking into account the failure that the refrigerator had, I removed the cover that covers the evaporator and in reality this coil was not full of ice as I expected, so I decided to submerge the bimetallic one inside a glass with ice so that it would close the circuit and the resistance was activated, I also advanced the TIMER time so that the compressor would rest and enter the defrost cycle, when doing this, the resistance turned on as it should.
- Placing the bimetal inside the glass with ice but without disconnecting it from the refrigerator:
- When I heard the click on the bimetallic, I immediately turned the TIMER knob until the refrigerator turned off, to start the defrost cycle:
Look, the two resistances were activated:
Result of this first review:
Well friends, with this test I have been able to verify that both the resistance and the bimetallic are in good condition, so that the problem is being caused by something else, but I think I am going to look for a technician, because there may be a gas leak or that the compressor is not compressing as it should, today I will talk to my friend "Cheo" who is a refrigeration technician, I am sure he will help me solve this problem.
I also did maintenance on the FREEZER fan:
The truth is, friends, this fault has been difficult for me to find, as you have observed, I have checked several parts such as the bimetallic, the resistors, the TIMER, the fans, and they are all in good condition, so the most convenient is to seek the services of a refrigeration technician to check the gas pressure in the system and at the same time, detect whether or not there is any obstruction or leaks in the pipes. I hope that the compressor is in good condition, because that compressor is of 1/3 hp and should cost more or less about 100 Dollars.
EN ESPAÑOL:
Hola amigos, hay un dicho que dice "Nadie cuida lo de otro" En realidad eso es así, cuando prestamos nuestras herramientas o equipos siempre las devuelven con defectos, les cuento que hace año y medio, mi hija viajó para Brasil y le dejó el apartamento a una amiga, solo por un año mientras ella regresaba, bueno amigos, la amiga de mi hija hace tres días nos llamó para entregar el apartamento, PERO, lo entregó con la nevera dañada, un aire con el compresor dañado, ¿Que les parece esto? pienso que la amiga de mi hija debió haber notificado el daño de estos equipos y por lo menos colaborar con las reparaciones.
Bueno amigos, ahora me toca reparar o mandar a reparar estos equipos, ayer comencé a revisar los diferentes componentes de esta nevera, esta nevera es una General Electric modelo vertical, la cual compré hace 23 años y hace 6 años se la regalamos a mi hija, en realidad yo no soy un experto en refrigeración, pero a esta nevera le conozco todas sus partes, durante estos 23 años solo ha fallado a causa del bimetalico, porque esta pieza siempre se están dañando, una vez le cambié el ventilador del compresor y en otra ocasión le cambié el reloj, todas estas reparaciones las he hecho yo mismo, en realidad es una nevera muy sencilla.
Intentando localizar una falla en la nevera de mi hija
Bueno mis amigos, les cuento que he revisado varios componentes y aun no he podido dar con la falla, el síntoma que presenta la nevera es el siguiente:
Los síntomas que presenta la nevera:
Enfría en el área del freezer, pero no alcanza el punto de congelación, es decir, no congela los alimentos en esa área, ni las cubetas de hielo.
El área de conservación de alimentos se siente fresco, pero debería enfriar un poco más.
Revisión de la nevera.
Generalmente cuando una nevera deja de enfriar en el área de conservación de alimentos y se siente frío en el freezer pero no congela, inmediatamente pensamos en que el responsable es el bimetalico, aunque también podría ser la resistencia de descongelamiento, pero lo primero que revisamos es el bimetalico, así que tomando en cuenta la falla que presentaba la nevera quite la tapa que cubre el evaporador y en realidad este serpentin no estaba lleno de hielo como lo esperaba, entonces decidí sumergir el bimetalico dentro de un vaso con hielo para que se cerrara el circuito y se activara la resistencia, también adelanté el tiempo del TIMER para que el compresor descansara y entrara en el ciclo de descongelamiento, al hacer esto, la resistencia se encendió como debería ser.
- Colocando el bimetalico dentro del vaso con hielo pero sin desconectarlo de la nevera:
- Cuando escuché el clic en el bimetalico, enseguida giré la perilla del TIMER hasta que la nevera se apagara, para dar paso al ciclo de descongelamiento:
Miren, se encendieron las dos resistencias:
Resultado de esta primera revisión:
Bueno amigos, con esta prueba he podido constatar que tanto la resistencia como el bimetalico están en buen estado, de manera que el problema lo esta ocasionando otra cosa, pero creo que voy a buscar un técnico, porque puede haber fuga de gas o que el compresor no esté comprimiendo como debe ser, hoy hablaré con mi amigo "Cheo" quien es técnico en refrigeración, estoy seguro que él me ayudara a resolver este problema.
También le hice mantenimiento al ventilador del FREEZER:
La verdad amigos que esta falla se me ha hecho difícil de encontrar, como han observado, he revisado varias piezas como el bimetalico, las resistencias, el TIMER, los ventiladores, y todos están en buenas condiciones, así que lo más conveniente es buscar los servicios de un técnico en refrigeración para que revise la presión del gas en el sistema y a la vez, detectar si hay o no, alguna obstrucción o fugas en las tuberías, espero que el compresor este en buen estado, porque ese compresor es de 1/3 hp y debe costar mas o menos unos 100 Dolares.