today my content is a bit strange because the motor that I repair today may very rarely other people experience something like this.
Because of this motor, the damage was caused by a group of forest rats that entered the residents' houses, so that some rats entered the body of the motorbike and bit a few wires, making a nest in the body of this motorbike.
But what's worse is that the cable that was bitten was only part of the cable in the fork switch, no wonder this motorbike was brought for the first time, I saw that all other electricity was safe such as horns, headlights, taillights, send lights, and speedometer indicators.
But when the starter button is pressed, there really is no response at all, like there is damage to the starter switch, but I tried to use the kick starter, and the motor also doesn't turn on, when I crank the motor, it's like it hasn't been turned on. activate or the motor is not in contact.
After almost an hour I checked, and almost all the wires were bitten by the mice but not all the wires were bitten off, only a few wires were broken.
The cause of the rich motor is that the ignition key has not been turned when the starter is due to the broken fork switch cable, because this motor uses a switch on its fork so that users do not forget to move the fork when they want to walk.
After I saw that the forked switch cable was broken, I took the initiative to make a simple connection first, but after I connected it the original way, fortunately the motor started immediately.
I immediately assumed that the cause of this motor not wanting to start was only the part of the fork switch cable that was broken, even though many other cables were bitten by mice and had no connection at all the motor could not turn on.
The easiest way to cover or connect the broken cable is to simply use black duct tape specifically to wrap the cable, that is if the cable does not break or there is no connection to insert the cable bandage pipette.
Because if the cable bitten by the rat doesn't break, but you want to bandage it using a pipette, I think that's the wrong way, it's better to just use duct tape to cover the cable that was bitten by the rat.
camphor
This lime can be used on all motorcycles, especially for motorcycle users whose homes are close to the forest which are often used as rats' nests.
I always put this chalk on a motorbike that has been entered by mice, but if you want to use this chalk so that the mice don't get into your motorbike and your motorbike hasn't been bitten by the wires by the mice, it could be because the use of this chalk has no side effects. and doesn't take up much space.
But if your motorbike has put or tucked this chalk behind the body of the motorbike, if you approach the point where the lime is located, you will feel the distinctive smell of mothballs, the smell is only for a few days or only within a week, the rest smells it will disappear by itself.
how to use mothballs on a motorbike
The method is very easy, after you buy camphor, you just have to divide it into four parts and then wrap it using plastic that you have punched small holes so that the smell of lime can come out.
After being divided into four parts, then you slip in the crevices of the body and cables, then tie them using plastic ropes, don't tie using cables that can conduct electricity, just use a rope made of plastic.
Remember oil, remember safety and love your wallet
Stay careful when driving, keep obeying traffic signs and don't forget to wear a helmet, broken bones are not like a broken heart boss
So much information from me, I hope it will be useful for mechanical friends wherever you are and see you in my next post
Greetings dirty hands from me by wearing clothes that are painted using used oil with abstract motifs