A few days ago, I took a close look at my white shoes and immediately felt sorry for them. Despite having only had them for three months, they were in a horrible state, as it seems that Leo (my son), has taken it as a personal task to step on them every time he has the chance. But that was not the only thing that led them to the state that can be seen in the photos, last September 16th, while we were on our way to a celebration for the independence of Mexico, we were surprised by a terrible rain and the streets ended up flooded. As you can imagine, the most affected were my poor Converse, which not only ended up full of water, but also took on a color that was not pretty.
Baje para ver la versión en español o haga clic - AQUÍ -
As it was already dark I didn't have the chance to wash them, and so I kept postponing that task until yesterday when I wanted to wear them to take Leo to school and I found that they were terrible, they needed to be washed. As these are the first white shoes I have had the brilliant idea of buying, of course I had no idea what to do to remove all the dirt they had on them. At that moment I remembered that I had seen a post in the community about a trick to wash white shoes, so at once I started searching and found the great tip from , luckily I had everything I needed at hand, so I got down to work to recover those poor shoes. Today I want to tell you about my experience putting that tip into practice.
Scroll to see all pictures
The first thing I did was to prepare everything I was going to need, in this case I used liquid soap because I didn't have powder. I followed the particular advice of my friend and made a mixture of pure liquid soap and baking soda, a part of it I used to soak the shoelaces, while the other part was for the shoes as such. At first, I started to apply it dry, but I realized that I had to get them wet because since they are canvas, applying it dry wasn't working. I put them in a bucket of water to get them nice and wet and then continued to apply it with an old toothbrush.
Once both shoes were covered with the soap mixture, I let them sit with the mixture for half an hour, I did this because I could not see any difference in the dirt on them. After that time I went back to look at them, and they were still the same, I remembered that the tip was not for fabric shoes and I got a little desperate, so I took a bar of soap and applied it all over the shoes and took a washing brush and started scrubbing them hard. The rubber part cleaned right up and looked very clean, but the canvas was still very dirty. After a while of scrubbing, my back started to hurt and all I could think was that this is why I shouldn't wash anything by hand.
Scroll to see all pictures
I gave it a second spin with the soap and baking soda mixture, carved out the shoelaces and started rinsing them because the pain was already too bad, and I didn't want to spend the whole afternoon not being able to move. The shoelaces cleaned up a lot, although not completely, but that didn't matter to me anymore because I just wanted to sit down and rest and take some pain medication. Continuing with the tip, I hung them in the sun for an hour and I don't know what happened, if the baking soda and the sun made a reaction or what, but the shoes turned out much better than they looked. They didn't turn out perfectly white, but I feel like if I could have carved them a little more, they would have been perfect.
It was definitely great to have the tip on hand, even though I ended up adapting it to my needs and context. Next time I'll put it into practice with my son's non-canvas sneakers, I'm sure they'll be much more effective on them than on Converse.
Probando una Nueva Técnica
Hace unos días le di un vistazo detallado a mis zapatos blancos e inmediatamente sentí pena de ellos. A pesar de tener solamente tres meses con ellos, se encontraban en un estado horrible, ya que parece que Leo (mi hijo), se ha tomado como labor personal pisarlos cada vez que tiene oportunidad. Pero eso no fue lo único que los llevó al estado que se aprecia en las fotos, el pasado 16 de septiembre, mientras nos dirigíamos a un festejo por la independencia de México, nos sorprendió una lluvia terrible y las calles terminaron inundadas. Como se pueden imaginar, los más afectados fueron mis pobres Converse, los cuales no solo terminaron llenos de agua, sino que además tomaron un color nada bonito.
Como ya era de noche no tuve oportunidad de lavarlos y así fui posponiendo esa tarea hasta que el día de ayer que quise usarlos para llevar a Leo a la escuela me encuentro con que están fatales, les urgía una lavada. Como estos son los primeros zapatos blancos que he tenido la genial idea de comprar, por supuesto que no tenía ni idea de que hacer para quitarles toda la mugre que tenían encima. En ese momento recordé que había visto una publicación en la comunidad sobre un truco para lavar los zapatos blancos, así que de una vez me puse a buscar y encontré el gran tip de , por suerte tenía a mano todo lo que necesitaba así que me puse manos a la obra para recuperar esos pobres zapatos. Hoy les quiero contar mi experiencia poniendo en práctica ese consejo.
Deslice para ver todas las fotos
Lo primero que hice fue preparar todo lo que iba a necesitar, en este caso yo utilicé jabón líquido porque no tenía en polvo. Seguí el consejo particular de la amiga e hice una mezcla de puro jabón líquido y bicarbonato, una parte de esta la usé para poner a remojar las agujetas, mientras que la otra parte fue para los zapatos como tal. Al principio comencé a aplicarlo en seco, pero me di cuenta de que debía mojarlos porque como son de lona, aplicarlo en seco no estaba funcionando. Los metí en una cubeta con agua para que se humedecieran bien y después continúe aplicándolo con un cepillo de dientes viejo.
Una vez que los dos zapatos estuvieron cubiertos de la mezcla de jabón, los dejé reposar con la mezcla durante media hora, esto lo hice porque no veía ninguna diferencia en la suciedad que tenían. Trascurrido ese tiempo regresé a verlos y seguían igual, recordé que el tip no era para zapatos de tela y me desesperé un poco, por lo que tomé un jabón en barra y lo apliqué por todos los zapatos y tomé un cepillo de lavar y comencé a tallarlos con fuerza. La parte de goma se limpió enseguida y se veía muy limpia, pero la lona seguía muy sucia. Después de un rato de tallar mi espalda comenzó a doler y solo pude pensar en que por eso es que no debo lavar nada a mano.
Deslice para ver todas las fotos
Le di una segunda vuelta con la mezcla de jabón y bicarbonato, tallé las agujetas y comencé a enjuagarlos porque el dolor ya era muy fuerte y no quería pasar toda la tarde sin poder moverme. Las agujetas se limpiaron mucho, aunque no por completo, pero eso ya no me importó porque yo simplemente quería sentarme a descansar y a tomar un medicamento para el dolor. Continuando con las indicaciones del tip, los colgué en el sol durante una hora y no sé qué pasó, si el bicarbonato y el sol hicieron reacción o qué, pero los zapatos quedaron mucho mejor de lo que se veían. No quedaron perfectamente blancos, pero siento que si hubiera podido tallarles un poco más hubieran quedado perfectos.
Sin duda, fue genial tener el consejo a mano, a pesar de que terminé adaptándolo a mis necesidades y a mi contexto. La próxima vez lo pondré en práctica con los zapatos deportivos de mi hijo que no son de lona, seguro en ellos son mucho más efectivos que en los Converse.
Thank you very much for reading me, see you in the comments
Muchas gracias por leerme, nos vemos en los comentarios
Pictures taken by me - Cover and banner made in Canva - Cartoons made in bitmoji
Fotos tomadas por mi - Portada y banner hechos en Canva - Cartoons hechos en bitmoji