Hola a todos los miembros de la comunidad.
Mi fregadero es doble, de un material inoxidable y lleva 10 años conmigo. Debo decir que nunca me ha dado problemas, pero, las piezas plásticas por donde sale el agua de fregar las lozas han sido un gran problema para mí.
Después de varios días con este problema, me decidí a arreglar este problema y emprendí el proceso de reparación.
Lo primero fue localizar la pieza que debía sustituir y tratar que fuera lo más económica posible, porque como saben, la economía de una jubilada no es muy holgada.
La pieza apareció y la compré. Al parecer era de la misma medida que la que debía cambiar.
Cuando llegué a casa y el técnico probó la pieza, esta era más larga, que la que tenía en la casa, por lo que hubo que picar un pedazo.
Otro problema fue que la pieza que compré no entraba en el engranaje por donde sale el desecho, por lo que hubo que rebajarla. Lo segundo fue que ante esta situación la junta no entraba y ante todo esto hubo que acudir a la inventiva del cubano y sustituir la junta plástica por pedazos de jabitas de nailon.
A pesar de todos los inconvenientes, el técnico logró solucionar todos estos problemas y solucionar los salideros de la pieza dañada.
Sin embargo, nos percatamos de que la pila del agua está dañada y también tiene un salidero de agua.
Ahora, inicia el proceso para buscar una pila nueva y sustituir esta.
Hasta la próxima entrega.
Créditos: He utilizado el traductor DeepL Translate.
Las fotos las tiré con mi teléfono Samsung Galaxy y son de mi propiedad.
ENGLISH
Hello to all members of the community.
Today I want to share the repair they had to do to my kitchen sink because the piece where the water I use to scrub comes out was in poor condition and I had to be drying the floor every 5 minutes because every time I used the sink, the water came out through the breaks in that piece.
My sink is double, made of stainless material and has been with me for 10 years. I must say that it has never given me any problems, but the plastic pieces through which the water from washing the dishes comes out have been a big problem for me.
After several days with this problem, I decided to fix this problem and began the repair process.
The first thing was to locate the part that needed to be replaced and try to make it as economical as possible, because as you know, the finances of a retiree are not very comfortable.
The piece appeared and I bought it. Apparently it was the same size as the one that needed to be changed.
When I got home and the technician tested the piece, it was longer than the one I had at home, so a piece had to be chopped.
Another problem was that the part I bought did not fit into the gear where the waste comes out, so it had to be reduced. The second thing was that in this situation the gasket did not fit and in the face of all this we had to resort to the inventiveness of the Cuban and replace the plastic gasket with pieces of nylon ropes.
Despite all the inconveniences, the technician managed to solve all these problems and fix the leaks from the damaged part.
However, we noticed that the water tank is damaged and also has a water leak.
Now, start the process to find a new battery and replace this one.
Until the next delivery.
Credits: I have used the translator DeepL Translate.
I took the photos with my Samsung Galaxy phone and they are my property.