IN ENGLISH:
Hello friends, today is Wednesday with the theme: "Tricks and techniques to simplify life" in relation to this, I bring you a wonderful idea to seal the cracks and small holes in the walls, it is a simple technique with few materials.
Well friends, this technique consists of covering the holes and cracks in the walls with a paste based on plaster and paint, but since sometimes we only want to seal a small hole in a wall, this time I am going to prepare this paste using the powder of a school chalk, which is actually plaster, just as you hear, I am going to replace the plaster with the powder of the school chalk.
Paste based on school chalk powder and paint, to seal holes in the walls
Yes friends, this idea is original, which occurred to me one day, when my wife decided to remove some nails from the walls, generally the holes and cracks in the walls are corrected with a plaster-based paste, which is sold in stores. of paints, but since I only needed to seal just 3 holes, the idea of using school chalk powder mixed with paint came to my mind.
Materials:
- school chalk
- Rubber-based paint in the color of the wall that we are going to repair
- Spatula
- Grit sandpaper 220
How to prepare the paste based on chalk powder and paint?
This paste is very easy to prepare, we just have to scrape the chalk to turn it into a powder and then mix it with the paint, ensuring that the consistency of the mixture is homogeneous and pasty.
Process:
- The first thing we will do is scrape the chalk, making sure that the dust is fine, for this we can use a razor or knife:
- After obtaining the chalk powder, we add the paint little by little, and at the same time we are mixing these materials, until obtaining a thick or pasty mixture, but manageable with the spatula:
Well friends, with these two steps, we have obtained our paste to seal the holes and fissures in the walls.
Repairing a small hole in the wall of my apartment
To show you how effective this paste is, I am going to seal a small hole that has remained in the wall after removing a nail. I think this will be the best example, because the nails in the walls are never missing, since with them they they hold the pictures and shelves, in truth, when we remove a nail from the wall we only need a small amount of paste, I think that to seal 3 holes, we would only need a spoonful of paste, which we can prepare with school chalk, without have to spend money.
Remove the steel nail:
Now we make a cut to the layer of paint that is peeling off:
We clean well the hole that we are going to fill with the paste.
The next thing will be to cover the hole, for this I am going to use the tip of a knife, I can do this with the spatula, but I don't want to dirty the wall, if the crack were bigger I would use the spatula:
- Now I am going to wash the spatula to level the paste, making sure that the surface is smooth:
- After the paste is dry, I am going to pass the 220 sandpaper, so that the surface is smooth, for this I am going to wrap the sandpaper in a school eraser:
- To finish I am going to paint the entire repair area:
After this interesting process, this is the result.
Well friends, I hope you liked this paste, which is easy to prepare and besides this, it is very economical and ideal for sealing small holes in the walls, greetings, God bless you and until another publication.
EN ESPAÑOL:
Hola amigos y amigas, hoy es miércoles con la temática: “Trucos y técnicas para simplificar la vida” en relación a esto, les traigo una maravillosa idea para sellas las fisuras y los pequeños huecos de las paredes, es una técnica sencilla y con pocos materiales.
Bueno amigos, esta técnica consiste en cubrir los huecos y fisuras de las paredes con una pasta a base de yeso y pintura, pero como a veces solo queremos sellar un pequeño hueco en una pared, en esta oportunidad voy a preparar esta pasta utilizando el polvo de una tiza escolar, que en realidad es yeso, así como lo oyen, voy a sustituir el yeso por el polvo de la tiza escolar.
Pasta a base de polvo de tiza escolar y pintura, para sellar huecos en las paredes
Si amigos, esta idea es original, la cual se me ocurrió un día, cuando mi esposa decidió quitar unos clavos de las paredes, generalmente los huecos y grietas en las paredes se corrigen con una pasta a base de yeso, que venden en las tiendas de pinturas, pero como solo necesitaba sellar apenas 3 huecos, me vino a la mente la idea de utilizar el polvo de la tiza escolar mezclada con pintura.
Materiales:
- Tiza escolar
- Pintura a base de caucho del color de la pared que vamos a reparar
- Espátula
- Lija grano 220
¿Cómo preparar la pasta a base de polvo de tiza y pintura?
Esta pasta es muy fácil de preparar, solo tenemos que raspar la tiza para convertirla en polvo para luego mezclarla con la pintura, procurando que la consistencia de la mezcla sea homogénea y pastosa.
Proceso:
- Lo primero que haremos es raspar la tiza, procurando que el polvo sea fino, para esto podemos utilizar una navaja, cuchillo o con la espátula:
- Después de obtener el polvo de la tiza, le agregamos poco a poco la pintura, y al mismo tiempo vamos mezclando estos materiales, hasta obtener una mezcla espesa o pastosa, pero manejable con la espátula:
Bueno amigos, con estos dos pasos, hemos obtenido nuestra pasta para sellar los huecos y fisuras en las paredes.
Reparando un pequeño hueco en la pared de mi apartamento
Para demostrarles lo eficaz de esta pasta, voy a sellar un pequeño hueco que ha quedado en la pared luego de remover un clavo, creo que este será el mejor ejemplo, porque los clavos en las paredes nunca dejan de faltar, ya que con ellos se sujetan los cuadros y repisas, en verdad, cuando retiramos un clavo de la pared solo necesitamos una pequeña cantidad de pasta, yo creo que para sellar 3 huecos, solo se necesitaría una cuchara de pasta, que la podemos preparar con la tiza escolar, sin tener que gastar dinero.
- Removiendo el clavo en la pared:
- Ahora le hacemos un corte a la capa de pintura que esta desprendida:
Limpiamos bien el hueco que vamos a rellenar con la pasta.
Lo siguiente será rellenar el hueco, para esto voy a utilizar la punta de un cuchillo, esto lo puedo hacer con la espátula, pero no quiero ensuciar la pared, si la grieta fuese más grande si utilizaría la espátula:
- Ahora voy a lavar la espátula para nivelar la pasta, y para que la superficie quede lisa:
- Después que la pasta este bien seca, le voy a pasar la lija 220, para que la superficie quede lisa, para esto voy a envolver la lija en un borrador escolar:
- Para finalizar voy a pintar todo el área de la reparación:
Después de este interesante proceso, este es el resultado.
Bueno amigos, espero que les haya gustado esta pasta, la cual es fácil de preparar y además de esto, es muy económica e ideal para sellar los pequeños huecos de las paredes, saludos, Dios los bendiga y hasta otra publicación.