Hola amigos de
y 
Espero todos se encuentren muy bien, y que estén teniendo una gran semana.
Desde hace unos meses la entrada de la casa está muy oscura, por qué se habían quemado las dos lámparas que se encuentran en la entrada y además el bombillo del poste de la calle lleva años quemado, aunque se ha pedido para que la cambien a través de varios medios, aún no han ido a colocarlo.
Las lámparas externas de la casa hizo corto circuito y se quemó el sócate de las dos lámparas, además de dañar la estructura de ambas lámparas, y para resolver el problema de iluminación y ver qué se puede hacer para repararlas más adelante, hoy coloque un bombillo en la parte superior del portón para que iluminará la parte externa e interna de la casa.
Para ello utilicé un pie de amigo, sócate, cable n° 12, teipe eléctrico, alicate, alambre, navaja y bombillo de 20W. Lo primero que hice fue entorchar un alambre con la ayuda de un alicate, lo cuál lo utilizaré para sujetar el pie de amigo, luego pase los cables del sócate a través del orificio que tiene en uno de sus extremo el pie de amigo y lo ajuste hasta que entrara todo. Uní el cable n° 12 a los extremos del cable del sócate y le coloque el teipe eléctrico.
Luego con la ayuda de una escalera subí cerca del techo y con el alambre entorchado sujete el pie de amigo en la parte más alta de la columna. Y por último uní el cable que le pasa corriente a las lámparas con el cable que va al sócate y le coloque teipe eléctrico. Para probar que todo haya quedado bien, enrosque el bombillo en el sócate y pase el interruptor para ver si encendía el bombillo, y el bombillo se encendió.
Ya queda probar está noche si el bombillo de 20W es suficiente para alumbrar esa área o si tengo que cambiarlo por otro con más watts.
Bueno amigos quise compartir esto con Uds, y espero que le sea de utilidad si van a realizar algún proyecto parecido en su casa.
Saludos y hasta otra oportunidad.
ENGLISH
Hello friends of
and 
I hope you are all feeling well, and that you are having a great week.
Since a few months ago the entrance of the house is very dark, because the two lamps that are at the entrance had burned and also the bulb of the street pole has been burned for years, although it has been requested to change it through various means, they have not yet gone to place it.
The external lamps of the house short-circuited and burned the socket of the two lamps, in addition to damaging the structure of both lamps, and to solve the lighting problem and see what can be done to repair them later, today I placed a bulb on top of the gate to illuminate the external and internal part of the house.
To do this I used a friend's foot, a socket, 12 gauge wire, electric wire cutter, pliers, wire, razor and a 20W bulb. The first thing I did was to twist a wire with the help of a pliers, which I will use to hold the foot of friend, then pass the wires of the socket through the hole that has in one of its end the foot of friend and adjust it until everything entered. I joined the cable n° 12 to the ends of the cable of the socket and I put the electric teipe.
Then with the help of a ladder I climbed up close to the ceiling and with the twisted wire I fastened the friend foot on the highest part of the column. And finally I joined the cable that passes current to the lamps with the cable that goes to the socket and I placed the electrical teipe. To test that everything was OK, I screwed the bulb into the socket and flipped the switch to see if the bulb lit up, and the bulb did light up.
Now I have to test tonight if the 20W bulb is enough to light that area or if I have to change it for another one with more watts.
Well friends I wanted to share this with you, and I hope it will be useful if you are going to do a similar project in your house.
Greetings and until another opportunity.
Fotografía por:| Photography by:
, Redmi 9 AI QUAD
Traducido con:| Translated with www.DeepL.com/Translator (free version)