Good day to all my Hive friends! Today I made a boy's undergarment. I was trying to learn something new since I'd never done it before. I found the pattern online and copied it. I like it when I can make a garment I've never made before because it's a challenge. The materials I used:
- Micro durazno azul y estampada
- Hilo de coser
- Patrón
- Tijera
- Alfiler
- Elástica
- Y lápiz
- Micro blue peach print fabric
- Sewing thread
- Pattern
- Scissors
- Pin
- Elastic
- And pencil
(Procedimiento:)||(Procedure:)
Paso 1
Paso 1
I started by cutting the center part of the inside, always folding the fabric towards the stretch side. I cut two pieces because that part is doubled. Then I marked and cut the side pieces, also doubled, and I cut the back piece as well. Now that these pieces are cut and ready, we'll move on to sewing.
Paso 2
Paso 2
I started by sewing the front piece, since that's where the design with the patterned and solid-colored fabric is. To assemble the front piece, I began by joining the pleat of the center flap (the patterned one). Then I sewed the side seams, and this is how it looked after sewing the front.
Paso 3
Paso 3
Now I proceed to sew the back to the front, joining the bottom part first, and then I sewed along the sides to form the garment, and this is how it's turning out.
Paso 4
Paso 4
I finish by adding the elastic at the top and around the legs as a final touch.
(Resultado final:)||(Bottom line:)
And so this little boy's interior turned out! I really liked the result, and I say challenge completed! We can achieve anything we set our minds to; we just have to dare to do it... Greetings to all of you 🤗
Las fotos presentadas en este blog son de mi autoría. Las imágenes han sido editadas utilizando Canva. Las fotografías fueron tomadas con mi celular Infinix hot 10. El contenido ha sido traducido con el traductor de Google.
The photos presented in this blog are my responsibility. The images have been edited using Canva. The photographs were taken with my Infinix hot 10 cell phone. The content has been translated with Google translator.