Hello hive.
A wonderful Thursday to you all.I’m happy to be here. I look forward to learning, sharing ideas, and connecting with everyone.
Knowledge is never wasted. I work as a sales representative in an organization where goods often arrive in cartons, and we are the ones who assemble them. Today, I had the opportunity to carefully watch and learn how to assemble a Royal dining set.
By paying close attention to the process, I was able to gain some useful experience. Sometimes, the best way to learn is simply by observing and being willing to try. Every small skill we acquire can become valuable someday.
I’ll be glad to share the little experience I gained while watching and learning how the Royal dining set is assembled. Learning never stops!
How to Assemble a Royal 6-Seater Dining Set — Step-by-Step
- Prepare Your Workspace
Clear a large, clean area close to where the dining set will be placed.
Lay down a soft cloth, carpet, or cardboard to prevent scratches on finished surfaces during assembly.
Unpack all boxes carefully, keeping the parts and hardware separate.
Major thing First Identify each piece using the parts
**List in your manual — typicall
1 Tabletop
4 Table legs
6 Chair components (seat base, backrest, legs)
Screws, bolts, washers, nuts, and caps**
Assembly tool(s) — often an Allen key or wrench provided by the manufacturer
Assemble the Dining Table
Step 1 — Position the Tabletop
Place the tabletop upside-down on the soft surface so you can access the underside easily.
Step 2 — Attach the Legs/Pedestal
If your set uses individual legs, align each leg with the pre-drilled holes on the underside.
Insert bolts or screws (with washers) through the holes and tighten lightly with the provided wrench or Allen key.
If your set has a central pedestal base, align the base to the underside holes and attach using the bolts and hardware provided.
Step 3 — Tighten Hardware
Once all legs or the pedestal is attached but still loosely fitted, check alignment from all sides. Then fully tighten each bolt to ensure stability — but avoid over-tightening, which can strip threads or damage Woods
Step 4 — Flip Upright
With help from another person (tables can be heavy), carefully flip the assembled table upright. Ensure it sits evenly on the floor. Adjust any leveling feet if available so the table doesn’t wobble.
Assemble the Dining Chairs
Step 1 — Lay Out Chair Parts
Most chairs will come in a few major pieces: seat base, backrest, and legs.
Step 2 — Attach the Legs
Connect the legs to the chair seat first using bolts and washers. Then align and attach the backrest to the seat and legs. Keep bolts loose until you’ve assembled the full frame.
Step 3 — Final Tightening
Check that everything is square and aligned, then tighten all bolts securely.
Repeat for all six chairs.
Final Tips & Safety
Do not overtighten screws and bolts until everything is aligned, as this helps prevent parts mis-fitting.
After assembly, periodically check bolts and retighten if needed as wood settles with use.**
Wishing you all a blessed and productive day!