---

Hello, friends especially needleworkers!

---

Today i would like to share the craft project i made up on weekend. Long time i haven't done any craf projects and this project made me a little worried cause i am not a pro in joining the body parts, but i tried my best to make this bunny plushie and finally i could finish it, with extra carrot bag.

I tried my best to make it as easy as i can and i took pictures of the making process accurately so that you could make it for yourselves too. Let's follow me to see how i made it!

---

Project Time: approximately 10 hours

---

Difficulty: Quite difficult for me

---

Skills Needed:

• running stitch
• back stitch
• blanket stitch
• whipped stitch

---

Materials & things needed:

• paper to make the pattern
• paper scissors
• craft scissors
• pins
• felt fabrics in white, soft brown, soft pink, orange and green
• sewing needle
• safety doll eyes in 7 mm size
• pinset
• filling stuff (dacron fibre)
• wire
• embroidery thread

---

How to make it:

---

1ST

I drew the pattern for the bunny and carrot bag then i cut them off.

---

2ND

Next, i pin the head on the white felt. Cut two of it. I also cut out the ears. Then the dot for one of the eye with soft brown felt.

---

3RD

I also cut two little circles and inner ear areas with soft pink felt.

---

4TH

I then joined the opened area on the head with back stitch. I did the same for the front and back parts. After that, i whipped stitch the two little circles for the cheek. After finished, i made the nose and mouth like below.

---

5TH

Next i cut the back of the eyes cause they were too long. After that i made the holes on the brown circle area, and head for the eyes. Put the eyes ther, so that now the head had the eyes.

---

6TH

Then i did the blanket stitch to join the front and back of the head parts. I also put the filling fiber in it before i closed it. Now the head was done.

---

7TH

After that i whipped stitched the inner soft pink area to the white ears. I did for both of the ears. While for one ear i only filled the filling stuff in it, i added the wire on the other. In order to join the front and back parts of each ear, like the head, i also used blanket stitch.

---

8TH

Now it was my time to joining the ears with the head. This time i used back stitch behind. The bunny's head now finished.

---

9TH

I pinned the body on the white felt and cut them out. I also did the same for the arms. While i cut 2 same parts for the body, i cut 4 same parts for the arms.

---

10TH

Now it was my time to join the back of the arms parts with the body. I used back stitch here. Then i stitched around both arms with the blanket stitch. I also didn't forget to fill the filling stuff on them before i closed it. Now they were done.

---

11TH

Now i closed the upper v holes on the front and back of the body with the back stitch. Then i joined the front and back parts with blanket stitch. I also put on the filling fiber before i closed it.

---

12TH

Next i also sew the head with the body. Now the bunny was done.

---

13TH

I cut out the bunny tail with the brown color. Then i did the running stitch around it, filled it with the fibre then pull it and sew it at the back of the bunny.

---

14TH

Next for the carrot, i cut out the orange felt. Then i did the back stitch and turned it upside down with the help of the pinset. I cut out the green felt as the leaves like below. Running stitch around the carrot, rolled and put the leaves in it then pulled the thread and made a knot.

---

15TH

Finished with the carrot i added the thread in it so it could be bring by the bunny.

---

VOILA, ta da this is it, Bunny Plushie with a carrot bag.

Isn't it cute?

---

Thanks for reading my article, hope you enjoy it and stay tune for more CRAFT things from me!

---

---

A bit about the author

---