Re-made my palazzo pant🥰

HELLO hive

It's a beautiful morning over here, how about over there?

That is a palazzo pant trouser yes, if you had gone through my earlier posts you would see I made a palazzo for myself.
We had this get together with friends and I decided to rock my palazzo pant to the venue, you can't imagine the amount of 'sew it for me too' I got from my female friends to the extent that I was feeling a sense of accomplishment🤗.

One of them gave me this material to sew for her

Materials needed
A trouser of fabric
Elastic
Thread
Measurements curve
Tailor's chalk

Step 1: Place the fabric on fold and mark the crotch on the fabric

Step 2: mark the hip and thigh measurements on the fabric too

Step 3: mark the lengths of the trouser then cut the marked areas out

This is the front cut, now to cut the back cut

Step 4: place the fabric on fold also and place the front on top

Step 5: measure 2 inches to increase the back crotch then mark it down

Step 6: the other side just needs 0.5 inches for seem allowance

After marking everything out you can now cut out

This is the front and back together

Then it's time to sew

First I'll join the sides

Next is to join the crotch and then the leg opening.

You measure and cut the band (I used 5 inches including the seam allowance

Let's join the band to the waist measurement and insert the elastic into it using a safety pin (depends on your waist measurements) I used 12inches of elastic