Hello everyone here in this lovely community, Hope you're all doing well?
I'm so thrilled to publish a post here and for today I want to share with you this kimono with pants and bra I made as this week's practice at my work place
So recently, I started learning to sew and at my work place, we have weekly projects and for this week we were asked to make a kimonu with pant and bra.
I'd love to share with you the steps I used in making it starting from the kimono, followed by the pants and bra
Firstly for the kimono
Since I was sewing a cut together sleeve, I folded My material into four and made sure the breadth of the material was my shoulder divided by two plus the length of the sleeves I wanted
I marked my shoulder line and my neckline (3 inches wide and 2 inches dept) , and then marked my armhole then used my hips measurement divided by 4 to take the whole body down till the length of the kimono after which I removed one part and slit it and then the other served as the back
I joined the cloth with my sewing machine
Now I'll proceed to the pant and bra
For the pant, I took my waist measurement, my flab measurement minus 2 inches.
I folded my material into two and then marked my waist measurement divided by 2 and my flab 2, for the flab area, I went in by 3 inches and for the waist area , I came down by 1 inch, I cut it out and opened it after which I cut another 3 separate pants so that I can use 2 for each side
Proceeding to the bra, the only measurement used was my under burst measurement, I folded my material from the hem to give a triangular shape and the measured my under burst measurement and the cut it out with additional three
I cut out ropes for the pant after which I turned it and started sewing the pant after sewing both pant and bra and adding ropes to it , this is what it turned out like
I hope i did a good work on my first try
Thank you so much for stopping by , have a nice day everyone
Byee to you all😍😍
