Needleworkmonday
Hello
Greetings to these wonderful people of Needlework community hope we are all doing well an work is fine.
Am here to share with us on how I started a project an Ankara long fitted gown with flare hand for a friend of mine. The work hold me complete 1 day in my working place (shop) to get what I want.
The item's i used are scissor, measuring tap, White chalk, long Zip an black tread.
Below are my step's
Let's get to work.
I Cut the half length that's from shoulder to under boost
Then i measure from under boost to kneel an cut
because I want to put black lace from were the material stop down to the full length of the gown.
I cut the lining the same shape with the half length (shoulder to under boost)
I cut the same from under boost till down were it will stop
After turning the material with lining then i joined them together.
I cut the hand and joined it together with the bodies
I also cut the black lace I put starting from kneel to the full length
Then straits to the ironing Table to iron the cloth.
I normally used iron when cutting, after putting lining an after making the dressed because it makes the cloth to look Nice
And I also focus on the finishing too so that the dress will not look somehow.
Thanks for watching