¡Hola amigos de Hive!
El día de hoy quise compartir con ustedes el paso a paso de la realización de este práctico y cómodo neceser, es de mucha utilidad y de una tamaño perfecto para llevarlo a cualquier parte con nosotros. ¡Espero les guste!.
Materiales:
Yo utilicé la pierna de un jeans reciclado, dónde corte:
• Un cuadrado de 30 cm x 30 cm.
• 2 tiras de 35 cm x 4 cm para las asas.
• De un retazo estampado corte los laterales
2 rectángulos de 30 cm x 10 cm .
• El forro lo realice con un rectángulo de tela azul de 30 cm x 48 cm.
• * 6 tiras de 15 cm x 4 cm de la tela de forro para tapar las costuras y darle y un acabado más limpio.
• 1 cierre de 30 cm, (el que uso es de chaqueta).
Procedimiento:
• 1- Se cosen las 2 tiras de 35cm para hacer las asas .
• 2- Se marca la mitad del cuadrado y cada lado se miden 5cm . (Allí se ubican las asas y se aseguran.)
• 3- Se pegan los laterales con costura recta, luego se pasa una costura para asegurar y decorar.
• 4- Se aseguran las asas a 2 cm en la tela estampada.
• 5- Se pega el cierre.
• 6-Se enfrenta derecho con derecho el forro y el bolso y se cose dejando el cierre en el centro.
• 7-Se voltea y en las 4 esquinas, se miden 6cm de alto x 5 cm de ancho, para darle la forma .
• 8 Por último se pegan las tiras para tapar las costuras.
Y listo!!
Trabajo terminado.
- Las fotos son de mí autoría, tomadas con un teléfono Alcatel 1v 2020.
- Fueron editadas en la aplicación de Instagram.
- Traducción con Deepl.com
- El contenido es 100% original y exclusivo para Hive.blog .
✨~ Aprovecha cada oportunidad ~✨
Hello friends of Hive!
Today I wanted to share with you the step by step of the making of this practical and comfortable toiletry bag, it is very useful and a perfect size to take it anywhere with us, I hope you like it!!!.
Materials:
I used the leg of a recycled jeans, where I cut:
• - A 30 cm x 30 cm square.
• - 2 strips of 35 cm x 4 cm for the handles.
• - I cut the sides from a printed piece of fabric.
• 2 rectangles of 30 cm x 10 cm.
• - The lining is made with a rectangle of blue fabric measuring 30 cm x 48 cm.
• - 6 strips of 15 cm x 4 cm of the lining fabric to cover the seams and give it a cleaner finish.
• - 1 zipper of 30 cm, (the one I use is a jacket zipper).
Procedure:
• 1- Sew the 2 strips of 35cm to make the handles .
• 2- Mark the middle of the square and measure 5cm on each side (place the handles there and secure them).
• 3- Glue the sides with a straight seam, then sew a seam to secure and decorate.
• 4- The handles are secured at 2 cm on the printed fabric.
• 5- The closure is glued.
•
• 7-Turn it over and on the 4 corners, measure 6cm high x 5 cm wide, to give it the shape .
• 8 Finally glue the strips to cover the seams.
And that's it!
Finished work.
The photos are my own, taken with an Alcatel 1v 2020 phone.
They were edited on the Instagram app.
Translation with Deepl.com
The content is 100% original and exclusive to Hive.blog .