Spiral fascia nature
I was sitting down in my living room bored with different thoughts running through my mind.
I jerked to my normal state of mind and decided to take away the boredom by doing something new, which was making a fascinator using a sewing needle.
Here is the material used.
London Crepe
Scissors
Matching thread
Sealing nylon
Tape rule
Crinoline
Candle gum
Glue gun
Alice band
Sewing needle
Sewing method
Step 1:The desired length of the crinoline was cut out
**Step 2: **The matching thread was passed into the sewing needle.
Step 3:The tip of the crinoline was tied with a thread to secure the rough edge of the crinoline cut out.
Step 4: The sewing thread was used to sew the breadth of the crinoline.
After stitching the tip of the crinoline, I dragged the thread to make the long crinoline lay on each other, which we made spiral.
Step 5: Alice's band was stitched to the fascinator, and 2 and a half inches of London crepe was cut out to hold the Alice band.
Step 6: The glue gun was plugged in to be able to use the candle gum. The glue gun was pressed to the Alice band, and the cut fabric was gum to the Alice band to make it look neater.
After stitching the fascinator, I rejuvenated.