Updated: March 13, 2025

Introduction Video: Music of the Spheres

Original Document: Google Doc Link

Warning

Please do not do these experiments unless you are a trained professional or are with a trained professional. This coil has been known to output extremely high voltage under the right circumstances. This guide serves as a documentation of my work and establishes a way for researchers and engineers to try and replicate my results. Please be safe and don’t do this if you are unsure of your abilities to do these experiments in a safe controlled environment.

This guide is a work in progress and might need some revisions or additions.

Public Domain Dedication – No Patents Allowed!

The following technologies are hereby dedicated to the public domain under the CC0 1.0 Universal (CC0 1.0) Public Domain Dedication:

• The Lightning Thief(Modified Joule Thief Circuit)
• The Green Machine Pulse Motor
• The Lumin Lamp with swappable coils
• The Resonance Relay extension wire(Wire with high speed UF4007 diode)
• The Paradox Box(N/N glued magnet with bifilar coil wrapped around)
• Beneficence TV Vortex Coils
• Fusion Coil
• Caduceus Coil

By placing these works in the public domain, we affirm that anyone is free to use, modify, distribute, and improve upon these technologies without restriction. No patents, trademarks, or other exclusive rights may be claimed on these designs. These innovations are meant to remain open-source and freely available to benefit all.
No Patents Allowed. Any attempt to patent or restrict the use of this work is against the spirit of open innovation and will be publicly challenged.

For more information, visit the Creative Commons CC0 page.

---

Preliminary Research for Phase 2

Original Document: Google Doc Link

It includes an indepth look along with extensive details of explaining the ideas behind the Bedini SG to a general reader.

Testing the ZPE Generator with a Bedini SG.

Phase 2 testing was planned as an effort to combine two very easy and
common free energy devices into one simple design that could be utilized for practical applications in energy generation and battery desulfation(Rejuvenation of a dead battery).

Update: We have since pivoted and put the bedini circuit on the back burner for now as we have been focusing on a modified Joule Thief circuit that has been showing promising results).

Background on Desulfation

John Bedini referred to the process of restoring a dead battery back to life as desulfation.

• Over time, lead-acid batteries can accumulate lead sulfate crystals on the battery plates, a process called sulfation. This buildup prevents the battery from holding a charge effectively and can make it seem "dead."
• Bedini’s battery chargers used pulsed energy to break down these sulfate crystals, restoring the battery’s ability to charge and function properly. This process is known as desulfation.

The Bedini SG Solid State circuit is essentially a system designed to charge batteries and extend their life using pulsed energy.

Bedini SG Solid State Circuit Breakdown

1. Pulsed Energy: The Bedini SG circuit works by sending sharp pulses of energy into a coil. This pulsing creates a magnetic field in the coil, and when the pulse stops, the magnetic field collapses. The collapsing field generates Back EMF, which Bedini referred to as radiant energy.
2. H-Wave Pulse: The H-wave pulse is the specific type of energy spike that Bedini described as being different from conventional electricity. It’s this H-wave that comes from the sharp collapse of the magnetic field, and it represents a burst of radiant energy. This pulse doesn’t behave like regular electricity (which faces resistance) but is instead harnessed as a powerful, quick energy burst.
3. Why it’s Important: The H-wave is the key to capturing this radiant energy from Back EMF. Rather than wasting the Back EMF, the Bedini circuit captures the H-wave pulse and feeds it into the battery. Bedini believed this was a form of energy that could rejuvenate batteries more efficiently than conventional methods.
4. Desulfation: The sharp H-wave pulses help break down the sulfate crystals (sulfation) on the battery plates. As the battery receives these rapid pulses of radiant energy, it not only charges but also rejuvenates by clearing the sulfate buildup that prevents it from holding a charge.
5. Solid State: In the solid-state version of the Bedini SG, all of this happens electronically, without moving parts (as opposed to some of his other designs that used motors or a flywheel). The coil and switching transistors in the circuit create the pulsed energy, generating the H-wave, which is then applied to the battery.

In simple terms:

• The H-wave pulse in the Bedini SG Solid State circuit is a special burst of energy created when the magnetic field around a coil collapses.
• This radiant energy pulse is captured and fed into the battery, where it not only charges but also desulfates the battery, helping to restore it.
• The whole circuit uses these radiant H-wave pulses to rejuvenate batteries, making them last longer and even reviving dead ones.

So, the H-wave is crucial because it represents the form of energy that Bedini believed could efficiently charge and desulfate batteries without the typical resistance or energy losses of conventional systems.

Below you can see the comparison of my wave at a higher resolution to John Bedini’s diagram below. Mine is on the inverse axis. This is a zoomed in resolution of the waveform.

Zoomed out waveform:

At first glance it appears to be similar to Bedini’s H wave. However, upon further inspection it is a partial H wave and is incomplete. Close, but not exactly what we are looking for.

Lets learn a bit about John Bedini’s theories of Back EMF and this H-Wave.

John Bedini H wave and Back EMF

The H-wave is a concept John Bedini used in his energy work to describe a specific type of electrical waveform. In simple terms, it's a pulse of energy that behaves differently from the standard waves (like sine waves) that are typically used in electrical systems.

Here’s a breakdown of what the H-wave is about:

• Unconventional Energy Flow: Instead of just flowing like a typical alternating current (AC) or direct current (DC), the H-wave involves a kind of sharp transient energy spike that Bedini believed could capture or release more energy than usual systems do.

• Radiant Energy: Bedini associated the H-wave with “radiant energy,” a type of energy he claimed could be harnessed from the environment. When the H-wave occurs in his systems, it supposedly allows the device to draw in extra energy from an external source, like the vacuum or the environment, which isn’t fully accounted for by conventional science.

• Energy Efficiency: Bedini's idea was that the H-wave could help his systems achieve what’s called over-unity (where the output energy seems to be greater than the input energy). He used this waveform to make devices like his battery chargers more efficient by pulsing energy in a way that was different from traditional methods.

In short, the H-wave is a type of pulse that Bedini believed could tap into hidden or unconventional energy sources, leading to more efficient or even excess energy production.

In John Bedini’s theories, he saw Back EMF (Electromotive Force)—which is typically regarded as a wasted byproduct in conventional systems—as a source of radiant energy. In standard electrical engineering, Back EMF is something to be grounded out or minimized, as it usually opposes the current in a circuit and causes energy losses, particularly in motors and inductive loads.

Lets take a look at a simple BREAKDOWN of Bedini’s approach to circuits:

1. Back EMF = Radiant Energy: Bedini viewed Back EMF not as waste but as a form of radiant energy that could be harnessed. He believed this radiant energy came from the environment or the "vacuum" (what some refer to as zero-point energy).

2. H-Wave: The H-wave in Bedini’s systems is the manifestation of this radiant energy, particularly in the form of sharp pulses or spikes that occur when a coil (like in his motor or charger designs) is pulsed in a specific way. Instead of grounding out this energy as waste, Bedini designed circuits to capture and recycle it.

3. Harnessing the Energy: By using techniques to capture these Back EMF pulses, Bedini believed he could increase the efficiency of his systems, achieving what some would call over-unity (output energy greater than input energy). In practice, this meant using the sharp spikes of radiant energy from Back EMF—the H-wave—as a driving force for his motors or to charge batteries.

The Gist

In summarizing most conventional systems waste Back EMF by grounding it, but Bedini saw it as a valuable form of radiant energy, which he called the H-wave. He built systems that could harness this energy rather than dissipating it, which he believed led to greater efficiency and potentially the tapping of additional energy from the environment.

BACK EMF in CONVENTIONAL SCIENCE

In conventional science, Back EMF (Electromotive Force) is a voltage that opposes the current in a circuit. It happens mostly in devices like motors and coils, especially when there’s a change in the flow of electricity.

Here’s an analogy to make it easier:

Imagine pushing a child on a swing:

• When you push the swing, it moves forward, and your push represents the electrical current flowing in a circuit.
• However, as the swing moves forward, it naturally pushes back against you a little—that's like Back EMF.
  *Similarly, that slight hang time when you throw a ball high in the air and it hovers just before gravity sets in, is also analogous to finding the zero point in your system. Where it is unaffected by the weight that it carries. Thanks to Victor Sears for this analogy.

In simple terms:

When you run electricity through a motor or coil, that flow of electricity creates a magnetic field. When the motor or coil stops or slows down, that magnetic field collapses, and this collapse generates a reverse voltage (Back EMF). This reverse voltage pushes against the direction of the current, making it harder for the current to keep flowing.

• In motors: Back EMF happens as the motor spins. The faster it spins, the more Back EMF is generated, acting as resistance to the power that’s driving the motor.

• In inductors and coils: When you suddenly cut off the power to a coil (like turning off a switch), Back EMF is generated as the magnetic field around the coil collapses. It’s like the energy trying to "push back" as the flow of electricity changes.

Why does it matter?

• In many systems, Back EMF is seen as waste energy, and it can even damage circuits if not handled properly.
• Conventional systems often ground it out or use components like diodes to prevent Back EMF from causing problems.

In summary, Back EMF is an electrical "kickback" or resistance that occurs when the flow of electricity through a motor or coil changes.

My assessment

When you pulse a coil, the rapid change in the electrical current flowing through it creates a magnetic field. As soon as you stop or change the current (like turning the pulse off or AC), that magnetic field collapses, which generates Back EMF—a voltage that opposes the direction of the original current.

Here’s how it works step by step:

Current flows through the coil: When you pulse electricity through a coil, it creates a magnetic field around it.

Pulse turns off: When you suddenly stop or reduce the pulse of current, the magnetic field around the coil begins to collapse.

Collapsing magnetic field generates Back EMF: As the magnetic field collapses, it creates a reverse voltage (Back EMF) in the coil, pushing against the direction of the original current. This happens because of Lenz's Law, which says that the induced current will oppose the change that caused it.

When coils are pulsed, the sudden change in current causes Back EMF, and that Back EMF opposes the original flow of electricity.

In most conventional systems, Back EMF is considered a nuisance, but Bedini sought to harness this Back EMF (and its radiant energy) instead of letting it go to waste.

Conventional Science (Lenz's Law)

In regular electrical systems:

1. Lenz's Law: Whenever a magnetic field is created by a current, and that magnetic field changes (such as when you turn the current off or change its direction), it induces a Back EMF (a reverse voltage). This resists the change in current that caused it.
   • Think of it like a brake or resistance that tries to "push back" when you try to change the flow of current.

Bedini, Dollard, and Tesla's Ideas (Radiant Energy and Aether)

1. Aether and Radiant Energy: In their theories, they often referred to an unseen medium called the aether, a sort of invisible energy field that surrounds everything.

   • When you pulse a coil and the magnetic field collapses, they believed this collapse could interact with the aether, generating what they called radiant energy or cold electricity.
   • This is different from regular electricity (hot electricity) because it behaves more like a flow of potential energy rather than current with resistance.

2. Back EMF as Energy to be Harnessed:

   • Instead of treating Back EMF as resistance or waste (like conventional science does), they saw it as valuable energy.
   • When you pulse the coil and the magnetic field collapses, the Back EMF (which they consider as radiant energy) is not resisted if properly captured, because this energy comes from outside the conventional electrical circuit—it’s interacting with the Aether.
   • They claimed that this radiant energy doesn’t face the same kind of resistance that normal electrical current does in wires because it’s a different form of energy (more like potential energy or voltage spikes) that moves quickly and freely, rather than through conventional resistance-causing current. Like Nathan likes to say. It's just pure potential.

Why No Resistance with Radiant Energy?

• Normal Energy (Current): When current flows through a wire, it faces resistance because electrons bump into each other and the material of the wire. That generates heat and wastes energy.
• Radiant Energy (Cold Electricity): According to Bedini and Dollard, this form of energy doesn’t face the same type of resistance because it’s more like a potential energy spike that interacts with the environment (the aether). It doesn’t rely on the physical movement of electrons, so there’s no heat loss or regular resistance.
  • They suggest that radiant energy moves freely without the constraints of normal current, which is why it doesn't generate resistance.

Lenz’s Law vs. Overcoming Lenz’s Law

• Lenz’s Law (conventional science): When you pulse a coil, the Back EMF opposes the change and causes resistance.
• Reverse Lenz’s Law (according to Bedini/Dollard): The collapse of the magnetic field in their systems generates radiant energy (Back EMF) that doesn’t cause resistance but can actually be harnessed. They believe that by correctly capturing this energy, you get a boost of energy from the aether without the usual losses that happen in standard circuits.

Summary

1. In Bedini and Dollard's view, when the magnetic field collapses (due to pulsing the coil), it interacts with the aether, creating radiant energy (or cold electricity).
2. This energy is different from conventional current because it doesn’t face the same resistance—it's like a form of energy that just "appears" and can be captured if done correctly.
3. This idea challenges Lenz's Law, where normally Back EMF would resist the current, but in their systems, they claim that they can harness this Back EMF in a way that doesn’t produce resistance, leading to higher efficiency or even over-unity.

-To be continued in part 2 of my DIY ZPE Guide-

How to debug my system:
Test for current on the charge battery by placing 1ohm resistor between positive and negative(replace battery) if you are getting current the system is not working and is leaking current somewhere(Diode, transistor etc):

More on the H wave by Bedini:

Common mistakes with the Bedini Monopole Flywheel:

Geralds Protection Circuit

Signal I get with Protection Circuit(Diode Only)

Custom Bedini SG Solid State Circuit w/ Simulator Link:
(Courtesy of Shanjaq): Falstad Link

---

Background Info

The ABHA coil is a variation of the Rodin coil. Marko Rodin likes to call the Rodin coil, “The Flux Ruster Atom Pulsar Electrical Venturi Spacetime Implosion Field Generator Coil.”

While working with Marko, Randy Powell had discovered previously unknown number patterns hidden inside the vortex math number sequences. And the ABHA coil variation was born.

Phase 1 guide was about getting my feet in the water. It had some really amazing insights. However, it was riddled with misinformation and factual errors due to the way I was reading the current. It was not the correct way. Suffice it to say we have corrected these issues and have been getting some remarkable results.

In the world of fringe science, breakthroughs and suppression are two opposing forces. Those who challenge the status quo risk everything to uncover the truth. This guide is the beginning of your story."

Preparation & Materials Guide

(Mark 1 Coil)

Pre-Workshop Assembly Class:

https://www.youtube.com/live/xNm8iIcPt3I

Rodin coil workshop

https://www.youtube.com/live/eLdp7uOhMNA

• Hot glue gun for making the frame

Making the Coil

• for a large 5 inch coil: 1000 feet of any enameled magnetic wire 24 AWG. 1000 feet should give you extra to work with if you mess up like I did on my first go. However my online workshops aim to mitigate these mistakes to save you time and energy on your own setups.
• Zip ties
• Hooked hinges to tie off your wire bundle
  -Tape measure for measuring out your wire
  -Electric drill/screw driver to wind the bundle
• Disposable Gloves
• Electrical Tape
  -Soldering Iron and solder/flux
• Torch for burning the enamel
• small grinder for sanding off the remaining enamel from the leads.
  -Shrink wrap wire insulation and heat gun(Optional but highly recommended to ensure safety and the colors help keep track of your connections)
• Your coil frame. I’m using this one provided by dragnse7en https://www.thingiverse.com/thing:2781132
  • But I recommend checking out some of Jordans frames from alchemical science as well.
    https://alchemicalscience.org/downloads/
• a .15uF 2000HV capacitor for powering with the AC Stereo amp open circuit method. WARNING: This has the ability to produce enormous amounts of voltage and even dangerous amounts of ozone at lower than normal voltages. Be safe!
• At least two true-RMS multimeters. I’m using an HT11A which is great for reading high frequency current and voltage.
• A Amp Clamp is also recommended to read AC. (mine is a PeakMeter PM2018A)
• Get yourself some decent analogue meters as well. Bedini emphesizes analogue is the only way to truly read zero point energy.

To save me some time writing this guide I will post a link to the video I used to help me wind the Vortex coil. There are some minor details, tips, tricks and other information I will be including in my online workshop where I will be doing hands on classes with anyone interested in learning how to properly wind and configure their rodin coil for these purposes.

Poe Coil and how its made(Erica Nunez of 1stopenergies): YouTube Link Archive Link

At the end of the video its a bit confusing but essentially what you are doing is making two channels of 12 connected wires each in series from your 24 wire bundle. This gives you 12 winds clockwise and 12 winds counterclockwise(for the nunez method).

Stereo Amp Receiver method

-Stereo amp receiver to supply the power and control the power level(Any will do with speaker wire output channels, however I am using an Insignia NS-R2001. You can also use a proper waveform generator if you have one available)

• Phone, laptop or wave gen to generate the tones.

(Back of stereo amp)

Ways of hooking it up

How to Measure(Updated Measurement Tutorial Coming Soon)

• Voltage(AC/DC): You want to measure in parallel
• Current(DC): You want to measure in series.
• Current(AC): You want to use an Amp Clamp.

Getting the exact measurements for this type of energy can be tricky. Therefore it is extremely difficult to actually gauge the efficiency of our system until we have better equipment available or have others replicate these tests.

By taking measurements with two multimeters, you can observe how the coil is affecting the signal. You may want to consider taking measurements at different frequencies or with different input voltages to see how the coil responds. A T-RMS(True Root Mean Square) Multimeter is highly recommended due to their accuracy at reading higher frequency voltage.

Setup for strong magnetic field convergence and speaker applications

For this setup we use only a single channel(Although you can leave channel B connected to the load if you’d like. The right speaker out is the positive terminal and is the driving power. This red speaker wire goes to input on channel A of the coil(start of wire). The negative output for the return terminal on the receiver will go to Channel A output/finnish lead.

Increasing the frequency input by 1 hz for bigger coils and 1khz(Suspected) for smaller coils. My big coil amplifies magnetic fields at around 24 hz and produces a VERY strong synchronicity effect with a neodymium sphere at 7hz. I suspect the geometry of the torus and the geometry of the sphere complement each other's fields in just the right way. You can also input another channel from the stereo(Left speaker positive out to channel B input to the coil /negative on output of channel B of coill) to create an even stronger magnetic field.

The coil's ability to create a resonant circuit with the amplifier and tone gen may be what allows it to transfer energy through the circuit. It’s creating a perfect resonant cavity for the energy to “Slide” down the conductor in the path that it wants to go. In my experiment, I’m using an AC tone gen fed into the stereo receiver from my phone(you can use any input you like laptop, phone, waveform gen) to drive the coil, which, when tuned correctly, creates a resonant frequency in the circuit. This resonance may be what allows the energy to flow through the circuit, regardless of whether there is a detectable magnetic field or not. The energy is being “Pushed” at the height of its flow. Right as it starts to slow down, back and forth using a path that it wants to go naturally. The closer you get to this path, the more efficiency you should see. This also makes sense. What is the one defining variable that determines if a conductor can create a ‘detectable’ magnetic field? Geometry. By simply twisting the wire into a coil shape you can create a detectable magnetic field. Why not push this one step further and say lets create a more accurate path for that energy to flow. That is essentially what the Rodin coil is. An extension of what we already know to be true. Geometry is integral to quantum electrodynamics.

It's also worth noting that the Rodin Coil's claims are not universally accepted by the scientific community, and many experts have questioned its validity and functionality. With my experiments I hope to provide valuable insights into the coil's behavior, and it's clear that further research is needed to fully understand its mechanisms. This is where you all come in. We need people to try and replicate my research here. Which is also just an extension of Daniel and Erica Nunez work which has somehow been lost in time.

Common mistakes

One of the most common mistakes I see with the Rodin coil is the assumption that it can operate effectively with a single channel. However, for optimal performance, it requires at least two channels. According to Daniel Nunez, energy should flow clockwise in one channel and counterclockwise in the other, with a 180-degree phase shift between them. This configuration generates two counter-rotating magnetic fields, which interact in a way that compresses and structures the coil's geometry, potentially leading to unique energy effects. He also mentioned the number of winds being significant and that having evenly spaced bundles such as a manufactured VGA cable will and I quote “Change everything”. If you look at Daniels advanced 432 coil it has multiple winds and channels but the wires are all evenly and delicately placed so that they are perfectly symmetrical. Perhaps this asymmetry or imperfection is what causes the ozone byproduct?

Another common mistake is that the wires in your bundle need to not only be twisted but soldered together in series. For my coil I have 12 wires in series for each channel(24 wires total). Although one did break due to microfractures in the manufacturing process that forced me to disconnect one from the second channel to balance the field. This led to my mark 1 coil actually having 11 wires per channel, 22 total instead of Daniels recommended 24. I can’t imagine what kind of efficiency we could get with all 24!

The Nunez patent discusses a coiled wire nest and frame for toroidal induction, which includes a vertically stacked coiled wire nest with identical layers. The patent states that the wire length and configuration of each stacked layer should be identical, and the distance between adjacent coiled wires should be identical.

Bundling the coil unevenly, and creating a loose wire or uneven bump in the bundle may affect the performance of the coil. The unevenness may cause the coil to vibrate or oscillate at different frequencies, which can lead to reduced efficiency or even failure of the coil.

In particular, the unevenness might cause:

1. Asymmetrical current flow: Unevenness in the coil can lead to asymmetrical current flow, which could cause the coil to operate inefficiently.
2. Resonance issues: The unevenness can cause the coil to resonate at different frequencies, which could lead to reduced efficiency.
3. Increased heat generation: The unevenness can cause increased heat generation in certain parts of the coil, which could potentially lead to reduced efficiency.

The unevenness in the coil could cause the coil to resonate at two or more frequencies, which can interfere with each other and prevent the coil from resonating at a single frequency. This phenomenon is known as "multi-mode resonance" or "frequency splitting".

In a typical coil, you would expect it to resonate at a single frequency, known as the fundamental frequency, which is determined by the coil's geometry and the applied magnetic field. However, when there is unevenness in the coil, it might cause the coil to resonate at multiple frequencies, including higher harmonics or overtones.

These multiple frequencies would interact with each other in complex ways, causing the coil to behave differently than expected. In some cases, this can lead to reduced efficiency or even failure of the coil. For example, if the coil is designed to resonate at a specific frequency, but it's actually resonating at multiple frequencies due to unevenness, it may not be able to store energy efficiently. Remember, these coils act as a capacitor and transformer at the same time.

In addition, the interference between the different frequencies can also cause the coil to vibrate or oscillate at different frequencies, which can lead to increased heat generation, reduced efficiency, or even mechanical damage to the coil.

By ensuring that the coil is properly wound and bundled, with identical wire lengths and configurations in each layer, you can help minimize the effects of multi-mode resonance and ensure that the coil resonates at a single frequency. This is why precise control over the coil's winding and assembly process is critical for achieving optimal performance.

If you’re having trouble with your results or having inconsistencies try this:

Measuring the RMS voltage: Use a true-RMS multimeter or a digital oscilloscope to measure the RMS voltage of the AC signal. This will give you a more accurate measurement of the actual voltage.

1. Using a high-impedance input: Try using a high-impedance input on your meter or a separate high-impedance amplifier to measure the voltage. This will help reduce any impedance mismatch and give you a more accurate reading.
2. Shielding the measurement setup: Try shielding the measurement setup to reduce any parasitic capacitance and electromagnetic interference.

Challenge of detecting a single monopole with a spinning magnetic field: With my traditional pole detector(Magnet on a hinge) all it does is spin inside the vortex. This makes it challenging if not impossible to actually tell if the Rodin coil is producing a single monopole as predicted by Daniel Nunez.

Use a different magnetic field detector: Consider using a different type of magnetic field detector that is better suited for detecting individual poles. Some options might include:

• Hall effect sensors: These sensors can detect the presence of a magnetic field and can be used to detect individual poles.
• Fluxgate sensors: These sensors are highly sensitive to changes in magnetic fields and can be used to detect individual poles.

Analyze the magnetic field pattern: Study the magnetic field pattern created by the coil and try to identify the individual pole signatures. You might need to use specialized software or equipment to analyze the field patterns.

Framework for your experiments:

Experiment Design:

Title: Replication Experiment: Vortex Math Coil Design and Energy Transformation

Objectives:

1. To replicate the energy transformation phenomenon observed in the original coil design
2. To investigate the effects of different geometric patterns and parameters on the energy transformation
3. To collect data on the consistency and repeatability of the phenomenon

• A precise replica of the original coil design, with identical dimensions and materials(Or as close as you can get)
• A power source (e.g., AC/DC generator or a variable DC power supply)
• A voltage meter or oscilloscope
• A current meter or ammeter
• Data logging equipment (e.g., data acquisition software, oscilloscope, or multimeter)

Experimental Procedure:

1. Set up the coil replica in a controlled environment, ensuring minimal electromagnetic interference (EMI) and noise.
2. Connect the coil to the power source and record the initial voltage and current readings.
3. Record the voltage and current readings at regular intervals (e.g., every 10 seconds) for a set duration (e.g., 30 minutes).
4. Repeat steps 2-4 for multiple trials, with varying frequencies and connection setups(Ex. Open vs closed circuit configurations).
5. Collect data on the energy transformation phenomenon, including:
   • Voltage and current readings
   • Power output (Watts)
   • Efficiency (as a percentage of input power)
   • Any observed changes in the coil's behavior or characteristics

Data Analysis:

1. Organize and analyze the collected data using statistical software (e.g., Excel, R, or Python) or specialized tools (e.g., data acquisition software).
2. Calculate mean values, standard deviations, and confidence intervals for each parameter.
3. Compare the results across trials to identify trends, correlations, and patterns.
4. Visualize the data using plots, graphs, or charts to help illustrate the relationships between variables.

Control Variables:

1. Ensure that all trials are conducted under identical conditions, with minimal variations in:
   • Coil geometry and materials
   • Power source and settings
   • Environmental conditions (temperature, humidity, etc.)
   • Experimental setup and instrumentation

Null Hypothesis:

1. The null hypothesis is that there is no significant difference between the energy transformation phenomenon observed in the original coil design and the replicated coil design.

Significance Test:

1. Conduct a statistical test (e.g., t-test or ANOVA) to determine if the results are statistically significant at a given level of confidence (e.g., 95%).

Phase 2 Guide

Phase two is the development and implementation of practical applications of the coil for various everyday purposes. We will go over all the information including setup, maintenance and development.

ABHA Coil Research: Phase 2 Beginner’s Guide

Welcome back, fellow explorers! 🚀 In this guide, we’re diving into Phase 2 of ABHA coil research. If you followed the first guide, you know we’ve come a long way since the Nunez Method with the stereo receiver—and we’ve learned a lot (including what not to do). Let’s break it all down in a concise, fun, and easy-to-read way! 😎

---

1. The Lightning Thief: Tuning the Coil ⚡

The Lightning Thief is our modified Joule Thief circuit and the key to tuning the ABHA coil for practical use in off the grid lighting solutions. It is used to oscillate a DC signal with a transistor, boosting the voltage significantly while also recycling the Back EMF produced by the collapsing magnetic field. Back EMF is energy that is usually wasted due to its destructive nature. But instead of a Tsunami hitting the forward EMF, by resonating the back emf with the rest of the electricity, it reduces or eliminates the resistance. Allowing the Back EMF to flow freely and be turned into power. Akin to a surfer riding a wave to shore.

Here’s what you’ll need:

Parts:

1. Toroidal BiFilarCoil
2. Modified Joule Thief Circuit
3. Source of power(ex im using 12v 20aH battery)
4. Load to power(.6 watt led lightbulbs and a 40 watt led panel for my setup)

Steps:

1. Build the basic circuit (Link to Tutorial Video: Michel's Modified ABHA Excitation Circuit: | BeneficenceTV)
2. Connect Coil and Battery
3. Turn the potentiometer until you witness the flicker of magic! The Neon Indicator Lamp will start to excite and glow! You should also hear a powerful ‘Humming’ noise coming from your circuit. That is caused by the vibration of the energy at its resonance frequency. When you have selected the proper load to match this resonance you should hear that coming from the actual light source instead of the circuit.

*While any Joule Thief can hum, achieving a humming light source means you've dialed in the circuit to a frequency where it's interacting with the bulb in a resonant way. Indicating peak efficiency and energy transfer! ✨

Tuning tip: Use an oscilloscope to monitor your coil’s resonance and waveform.

What we can accomplish with this method?

1.2 Lightning Thief Configurations 🔧

The Lightning Thief setup is highly versatile, and we’ve developed several exciting configurations(These have not been tested with the open circuit method yet):

1. Dual Thief: Combine two Lightning Thief circuits for increased power output. This setup connects one primary circuit working in tandem with a secondary(Pickupcoil). The primary is used to drive the main ABHA coil and is connected to the source/battery. While the secondary pickup coil is used to capture any extra energy from the ZPE field and is NOT connected to the source/battery.
   • Status: Full functional
2. ThroupleThief: Integrate two other Lightning Thief circuits into a single secondary coil. This multi-circuit setup amplifies the energy transfer, making it ideal for higher-demand experiments. One channel for each secondary from the same pickup coil. Three intricately intertwined Lightning Thief's make for a shockingly fun night!
   • Status: Full functional
3. Micro Thief: Use the Micro Vortex Coil with the Lightning Thief for compact, high-efficiency operation. This configuration is perfect for small-scale, portable applications.
   • Status: Tested but not fully tuned.
4. Green Thief: Pair the Lightning Thief with the Green Machine Pulse Motor setup for energy-efficient pulse generation. This configuration is excellent for systems requiring consistent, low-power pulses. Future configurations may be able to utilize this configuration to ‘close the loop’ with the extra recycled energy from the magnetic rotary. Closing the loop is the holy grail of free energy research and we’ve been trying to figure out how exactly the Green Machine can be utilized in the best way possible.
   • Status: Not tested yet.
5. Lumin Thief: Connect the Lightning Thief to a Lumin Lamp for minimal but functional light output. This setup could demonstrate the coil’s potential for practical lighting applications with low input power.
   • Status: Not tested yet.
6. The Dual Thief Paradox: Using the Dual Thief configuration with the Paradox Box.
   • Status: Not Yet Functional

Each configuration offers unique advantages depending on your goals. Experiment and find the one that works best for your project! 🌟

2. Stereo Amp Board Method 🎶

We experimented with stereo amp boards (like the Drok mini amp) and found some success using a 0.15µF capacitor to produce high voltage. Here’s how you can replicate our results:

1. Hook up your stereo amp to the ABHA coil, using the AB method:
   • Connect Pos channel output from Stereo to channel A Start
   • Connect Neg channel output from Stereo to Channel B End
   • Channel A End to one side of .15uF capacitor and junction off to pos input of load/lightsource.
   • Channel B Start will be used to finish the circuit.
   • Connect Channel B to the opposite side of the capacitor and junction off to the negative input of the load/lightsource.
   • This last part is very important. Please pay attention to this. What you're doing here is connecting Channel A End and Channel B Start together using the actual load. This means you must select the wattage for the load very carefully, otherwise you can throw off your resonance and you won't experience the full efficiency of your system. This is what I’ve been calling ‘The Nunez Method’. Daniel Nunez of 1stopenergies developed this method and deserves credit for this discovery.
2. The 0.15µF capacitor is parallel to the load for stability.
3. Use a frequency generator app to control the input tones (1-30KHz).
4. Monitor voltage output using your trusty oscilloscope. 📊

Pro tip: Keep an eye on heat levels and ensure your setup doesn’t overheat. A properly made vortex coil should actually cool down after a certain threshold of voltage is input into the system. But don’t just assume your coil will do this. Take the proper precautions. Keep a fire extinguisher close by in your lab at all times and practice using it. Safety first! 🔥

Stereo Method Shown On Left:

3. Monopole Detection 🧲

Here’s where things get exciting! We’ve started detecting monopoles in the magnetic field produced by the ABHA coil. We will use the closed circuit stereo amp board method for this pseudo monopole. From my experience, there maybe certain frequencies that you can get the monopole and ones you don’t. I suspect this is due to imperfections in my coil leading to a ‘leaking’ of the north pole or the inner to outer diameter of the coil frames ratio being off(my current frame ratio 1:2 vs another ratio like 1:5 or golden ratio). Those are my two working theories.

Here’s how you can check for a Monopole in your system:

Tools:

1. Magnetic Pole Detector(Electronic Recommended)
2. Stereo Amp Board
3. ABHA Coil
4. Signal Generator or Frequency Generator of some kind.

Connection:

• Connect one channel output from Stereo to channel A Start
• Connect the other channel output from Stereo to Channel B End
• Connect Channel A End and Channel B Start

Steps:

1. Power up your Stereo Amb Board
2. Slowly move the frequency slider up one 1hz at a time while stopping to monitor the poles each time. Stop and hold the magnetic pole detectors button down for at least a 30-60 seconds before you move on to the next frequency. This due to the fact that at lower frequencies the pole might only blink once every few seconds. So, what might initially look like a monopole, could in fact be a slowly blinking asymmetrical dipole. You just didn’t hold the button down long enough on your pole detector to see the second pole.
3. Look for anomalies—pockets of frequency where the field registers only one pole. Sometimes the North pole does blink very slowly so keep your finger held down on the pole detector button.

What this tells us: Monopole behavior could explain some of the coil’s unique properties, like energy efficiency, its unique abilities such as acting like a 1:1 step up transformer, and it's strange waveforms. 🤔

Video of Monopole detection in my system:
🤯🧲Did I build a Magnetic Mono-Pole? |Holy Grail Physics| BeneficenceTV #rodincoil #vbm #vortexmath

4. Magnetic Rotary Efficiency ♻️

We’ve explored using a magnetic rotary device to reduce input wattage requirements. Here’s the basic idea:(Coming Soon) This feature has been tested and we’ve experienced a reduction of input power by up to 30 watts.

2. 💫

Results so far: Significant drops in input wattage while spinning a neodymium sphere. Experiment with magnet spacing and RPM/Frequency for the best results. Specifically noticed a 30 watt reduction on input power requirement simply by spinning the neodymium sphere. 🌀

Micro Vortex Coil (Shown below) was not as efficient only reducing wattage by 1-2 watts at the same input power as the Mark 1.

10 Watt reduction video demo:

5. Key Takeaways 📝

• The ABHA coil works best when finely tuned with the Lightning Thief circuit.
• Stereo amp boards and capacitors can help generate high voltage—but watch your heat levels and Ozone production.
• Detecting monopoles opens the door to fascinating new possibilities.It is also extremely dangerous when using high RPM’s and a glass container to amplify the aether interactions. Please use safety goggles and gloves as the glass can chip when the sphere is fully synchronized with the coil.
• Magnetic rotary devices can cut input wattage without sacrificing efficiency.

Video of me using this method to reduce input wattage by 10 watts!(we’ve gotten that up to a 30 watt reduction):
Efficiency Gains with Magnetic| BeneficenceTV

6. Discoveries: The Resonant Pulsed Waveform – A New Class of Synthetic AC

In the course of testing various Rodin coil configurations, I uncovered what appears to be a new or unclassified type of electrical waveform—something that bridges the gap between traditional alternating current and modern pulsed DC systems. I’ve named it the Resonant Pulsed Waveform (RPW).

This waveform is not produced by standard AC methods, nor by typical PWM or pulsed DC techniques. Instead, the RPW is generated through the precise synergy between forward EMF and back-EMF, timed and tuned in such a way that a stable, resonant signal emerges throughout the entire system. It is further enhanced and shaped by the geometry of the coil—in this case, a Vortex-based structure.

---

What Is a Resonant Pulsed Waveform?

Unlike sinusoidal AC (which is smooth and grid-driven) or pulsed DC (which abruptly switches on and off), the RPW is a synthetic, resonant waveform with three key characteristics:

1. Near-Perfect Sine Wave (Macro Scale):
   When zoomed out on an oscilloscope, the waveform appears as a highly regular sine-like wave—almost indistinguishable from a pure AC signal, despite originating from pulsed energy interactions.
2. Nested Harmonics (Standard Scale):
   Zooming in to a typical viewing range reveals a complex layering of harmonics. The waveform appears to bounce off itself, creating nested oscillations—as if one frequency is echoing or fractaling through the system.
3. Zero-Point Convergence (Micro Scale):
   At the deepest zoom levels, the waveform converges into what looks like a zero point—an ultra-fine energetic stillness or node of symmetry, suggesting field self-cancellation or coherence at a fundamental level.

These three features are present everywhere in the system. No matter where you probe—across the coil, load, ground, or even high-impedance points—the same waveform structure persists while floating the probe. This suggests a total-system harmonic resonance, where energy is not just flowing through, but circulating in phase-locked unity. (Floating the probe is required to get a full picture of the system. You can ground your Oscope signal and see the pulsed signal but this isolates the back emf component and you only see half of what’s actually going on. By floating the probe you don’t see a clean image but you see the whole interaction.)

---

How It Was Discovered

The RPW was uncovered using a modified Joule Thief-style pulse generator (nicknamed the Lightning Thief) driving a Vortex coil with optimized geometry. By carefully timing the interactions between forward EMF (the drive) and back EMF (the collapse), when combined with the correct capacitance in the load(choosing your light to correctly match the system's impedance) the system entered a resonant mode that produced the unique RPW signature.

Key factors in the discovery:

• Precise tuning of pulse frequency
• Exploitation of coil symmetry
• Controlled interaction between push and pull phases of the waveform
• Observation of system-wide coherence across all test points

Why It Matters

The Resonant Pulsed Waveform offers possibilities not available with standard electronics:

• Minimal energy loss due to back-EMF capture and recycling
• Stable energy field with characteristics of both AC and DC
• Possible coupling to ambient or zero-point field interactions
• Potential for radiant or scalar energy extraction

It doesn’t just drive a load. It activates a field structure—one that seems to envelop and unify the entire system in resonance.

Real-World Potential

If replicated and refined, RPW systems could enable:

• Efficient, lightweight propulsion systems, especially when paired with rotating magnetic fields
• Radiant charging platforms using capacitive or inductive harvesting
• Overunity conditions in specific open-circuit designs
• Research into biological field interaction, as the waveform shows reactivity to human proximity and touch
• New forms of wireless energy transmission or “whole-field” power zones

---

⚡ Note for Builders

Achieving an RPW requires more than just a signal generator. It demands resonant geometry, perfected timing, and an understanding of EMF behavior. Even small deviations in frequency or core material can collapse the waveform into noise. But when it locks in—you’ll see it everywhere. The ubiquitous waveform is a tell tale sign you’ve just achieved synthetic AC.

Other Phenomenon We Are Looking At

The notorious H-Wave. Described by Bedini as an initial sharp transient spike followed by an h shaped wave. Can our Rodin coil produce a nearly perfect one on each axis? I’m not experienced enough reading wave forms to be able to determine that at this moment. If any of you knows the answer please reach out to me: **BeneficenceTV@gmail.com **

Bedini Shows the H-Wave:

Our Signal:

Claims of the Bedini SG

• Desulfation: Restores dead batteries by using pulsed energy to break down lead sulfate crystals, rejuvenating battery life.
• H-wave: Generates a unique pulse (radiant energy) from the collapse of the magnetic field, believed to charge batteries more efficiently than conventional methods.
• Harnessing Radiant Energy: Harnesses Back EMF as a valuable energy source, seen as a form of radiant energy that can be captured and recycled, unlike traditional circuits that waste it.
• Over-unity Potential: Claims the system can produce more output energy than input, achieving greater efficiency by tapping into environmental energy (possibly zero-point energy). Even charging/restoring a battery while barely touching the power battery.
• Solid-State Version: No moving parts; the circuit electronically generates and applies H-wave pulses to charge and desulfate batteries.

Now you can see why I chose the Bedini SG as the perfect candidate for Phase 2. It already produces this H wave that I’m getting with my coil when it's in resonance. Keep in mind though, at the time of choosing this circuit I didn’t have access to an oscilloscope so I actually had NO IDEA that my system produced this H wave. I just had an intuition that it would complement my ZPE system. We have not started our actual testing with the Bedini SG. If anyone in the community gets on this project before I get a chance please update me so I can add your findings in this guide 🙂

7. Benefactors Explanations and Observations

How to understand why AC is more efficient at transmitting energy:

Imagine you have to transport water from one place to another using pipes. Now, if you were to push the water through the pipes constantly in one direction, it would require a lot of force and energy to keep pushing it the entire way. This is similar to direct current (DC), where the flow of electricity is in one direction.

But, if instead of constantly pushing the water in one direction, you could make it move back and forth, it becomes much easier to transport the water. You can use a pump that vibrates or oscillates, and the water moves forward and backward, making it easier to push through the pipes without using as much energy. This back-and-forth motion is similar to alternating current (AC), where the flow of electricity changes direction periodically. Like being pushed at the height of your arch when swinging on a swing.

Using alternating current in electrical systems is similar to the back-and-forth motion of the water. With AC, the electricity can move forward and backward rapidly, and this makes it easier to transform the voltage for efficient long-distance transmission. It allows us to increase the voltage for transmission, reducing energy losses and making it more efficient to deliver electricity to our homes, businesses, and Industries.

So, by alternately changing the direction of the current, we can make electrical transmission more efficient, just like how oscillating or alternating the water flow in the pipes makes it easier to transport. Using its own momentum to reduce resistance. Similar to the natural pendulum effect of a magnetic field. Just like a pendulum oscillating back and forth, AC uses its own momentum to reduce resistance and make the transmission of electricity more efficient. The alternating current creates a back-and-forth motion, which helps to overcome the resistance encountered during transmission. This allows for the energy to be transported over longer distances with fewer losses.

Theory of Frequency Splitting via Asymmetrical Turn Ratios

Magnetic field direction

The direction of the magnetic field can be influenced by the number of turns and the direction of the turns. For example, if the coil has an even number of turns, the magnetic field may be oriented in a specific direction, while an odd number of turns can result in a different magnetic field orientation.

Asymmetrical ratios of turns might indeed produce a second resonant frequency, which can have a significant impact on the overall behavior and performance of the system. This phenomenon is often referred to as "frequency splitting" or "harmonic resonance."

When the coil's turns are not perfectly symmetrical, it can create a situation where the magnetic field is not perfectly aligned with the coil's axis. This can lead to the creation of a secondary resonant frequency, which is not present in a perfectly symmetrical coil. This secondary frequency can interact with the primary resonant frequency, causing the system to behave in unexpected ways.

The effects of frequency splitting can be far-reaching:

1. Resonance disruption: The secondary frequency can disrupt the primary resonant frequency, making it difficult to achieve or sustain optimal performance.
2. Harmonic interactions: The two frequencies can interact with each other, creating a complex harmonic structure that can affect the coil's behavior and energy generation.
3. Energy leakage: The asymmetrical ratio of turns can lead to energy leakage, where some of the energy generated by the coil is not efficiently utilized or stored.
4. Anomalies and unpredictability: The presence of a secondary frequency can introduce anomalies and unpredictability into the system, making it challenging to model and predict its behavior.

The Aether Conspiracy

In the annals of scientific history, the luminiferous Aether once reigned supreme as the mysterious medium through which light waves were believed to propagate. However, a controversial theory posits the existence of a conspiracy to eliminate the aether from scientific legitimacy, with Albert Einstein emerging as a central figure in this narrative.

According to this alternative perspective, the luminiferous Aether, a cornerstone of many groundbreaking theories and inventions of the past, was systematically dismissed and discredited through the efforts of a shadowy cabal within the scientific establishment. Einstein, heralded as a scientific genius and innovator, is speculated to have played a pivotal role in crafting a new narrative that replaced the aether with imaginary particles and mathematical constructs.

The Michelson-Morley experiment, long heralded as the death blow to the luminiferous ether theory, is reexamined through this lens as a strategically engineered experiment designed to discredit only one proposed theory of the aether, while other viable theories were ignored and forgotten. This selective dismissal of alternative theories and the emphasis on theoretical constructs over empirical evidence raises provocative questions about the nature of scientific inquiry and the influence of historical biases on our understanding of the universe.

As we grapple with the complexities of scientific progress and the interconnected web of theories, experiments, and societal influences that shape our knowledge, the tantalizing possibility of a hidden agenda to suppress the luminiferous Aether theory challenges us to reconsider the foundations of modern science and the narratives that guide our exploration of the unknown.

8. Nunez’s Theories and Observations(1stopenergies)

Electrogravitics

Two counter rotating magnetic tesla fields synchronized to the vibrational frequencies of the earths magnetosphere combined with a capacitor wrapped in a transformer type tesla coil but in the shape of a sacred geometric toroid to eliminate any resistance to flow at an atomic level.

The Dolard/Tesla method of just using the same weight for the same material Cross hitch/clockwise and counterclockwise rodin coil wind seems to produce a stronger electromagnetic
field.

Sphere rare earth magnet in center of vortex coil a cylindrical coil and placed around spinning magnet - not counting power from the wall, the multimeter on cylindrical coil = more voltage than went in.

DC provides a south pole and a void with no north pole AC provides two south poles at the center/vortex and no north pole

Two coils hooked up in parallel will destroy the second coil
high voltage may produce white powder in center indicating high ozone production Caution is advised.

Incite(The major leap here that needs to be done, is the proper engineering of the cabling. Right now it's
just a rough bundling of wire.

Ordered, precisely spaced wire in a cable, that is used for the wrapping will change everything. Think of the way VGA cables are.

(This is why I believe the Version 3 Advanced POE coil frame will be the most efficient if we can get someone to help us reconstruct one)

Properties of the Vacuum:

Fractal physics of charged distribution is the key to vacuum zero point coherence and negentropy. All vacuum coherence technologies require fractal conjugate charged symmetries to implode the surrounding "ether" which is a superfluid charged media to the point of negentropy(Self-organization).

"Free energy is just a threshold of distribution efficiency from the superfluid zero point vacuum." paraphrase Dan Winter

My Developing Theories(Random and incomplete thoughts)

What if this system is closing off the inflow to the ether and allowing zero point energy to flow into the system allowing it to maintain or increase the current? We already know that a transformer can step up voltage based on the number of winds it has in its secondary coil. This coil essentially acts as two coils combined into a 1:1 transformer. Perhaps the geometry is close enough to achieve this 1:1 transformer effect? Mark Rodin says that radiant energy travels in the opposite direction of magnetic flux. In Marko Rodin's fingerprint of god diagram we see that zero point energy is activated by the synergy between two positive to one negative or two negative to one positive in the form of 3,9,6(-,+,-)(+,-,+). What is the relationship of this to the coil’s ability to achieve its remarkable abilities? As I understand it, Tom Bearden described over-unity being achieved by a system of uneven stability or asymmetry. -,+,- / +,-,+

ADDENDUM: We were completely wrong!
I was able to achieve the Nunez open circuit method by attaching a .15uF 2000HV Tesla Cap to the coil in parallel with the load. This was able to excite 5 neon lamps!!! My coil apparently doesn’t act that differently at all. I just had the system configured incorrectly. Once we straightened out a couple of issues it all worked perfectly and as expected. Regarding Daniel Nunez claims, most of the stuff that I've looked into turned out to be factual. We did produce a monopole. But we also are getting unusual effects that Daniel did not experience. We got a north pole at certain frequencies. Perhaps he didn’t detect it but it was there? Or perhaps the micro imperfections within my coil are actually causing it to behave slightly differently.
Video of me exciting 5 neon lamps with only about 18 volts!!
High Voltage Academy | BeneficenceTV #Rodincoil

Laws of Thermodynamics

The laws of thermodynamics, specifically the first and second laws, are indeed formulated for closed systems. A closed system is a system that has no exchange of matter or energy with its surroundings. Think of a thermos flask: it's a container that keeps its contents (like hot coffee or tea) isolated from the outside environment.

On the other hand, the universe is not a closed system. It's an open system because it's constantly exchanging matter and energy with itself. The universe is expanding, and new matter and energy are being created in the form of stars and galaxies.

The problem is that the laws of thermodynamics were developed for closed systems, where entropy (a measure of disorder or randomness) always increases over time. In an open system like the universe, this isn't necessarily true.

Here's an analogy to help illustrate this:

Imagine a deck of cards. In a closed system (like a deck in your hand), when you shuffle the cards, they become more disorganized and random (increased entropy). But if you add new cards to the deck (analogous to new matter and energy entering the universe), the overall organization and structure of the deck can actually increase (like a new card becoming part of a previously non-existent sequence).

In the same way, in an open system like the universe, new matter and energy can bring about increased organization and structure, which would seem to defy the second law of thermodynamics.

However, it's not exactly a contradiction because the universe as a whole is still subject to the laws of thermodynamics. The increase in organization and structure occurs at a smaller scale (like on Earth or within galaxies), while the universe as a whole continues to expand and cool, following the second law.

Think of it like a cosmic seesaw: while local structures within the universe might become more organized, the universe as a whole is still subject to entropy's gradual increase.

In summary

• Closed systems follow the laws of thermodynamics (first and second laws).
• The universe is an open system that exchanges matter and energy with itself.
• While local structures within the universe might become more organized, the universe as a whole still follows the second law of thermodynamics (entropy increases).

Theory on Magnetic Synchronicity

I believe based on the researched theories of the aether, that perhaps plastic is not the material we would need to produce magnetic synchronicity between the rodin coil field and the neodymium sphere. This explains why all the videos I've seen of this effect use a glass cup. Apparently, there is a theory that glass is able to amplify the aether energy more like an antenna than the plastic inside the cup I was using. Will be testing this in a safe way soon. My research partner and I have also come to the conclusion that we may need a specific design for our vortex coil to be able to fully synchronize with the sphere. Specifically we may need at least 3 channels to accomplish this.

We all but confirmed this in a live stream where we noted a significant reduction in power/RPM for the neodymium sphere in a plastic cup vs at the same power level it spun like crazy inside the glass cup. This could be evidence that glass is a natural amplifier of the Aether interactions.

If thermal reduction is in fact practical at higher voltages for this coil design. Think about the applications:
Replacing this extremely loud, hot, inefficient and expensive transformer

With this simple design that is cost effective, compact, self-cooling and extremely efficient!

---

Stay curious, stay creative, and keep pushing the limits of what’s possible. 🌌 Happy coiling!

-The Benefactor(Ben E. Factor)

9. 🎥Video Tutorials👀

Coil Construction

Fireball Coil(Spool and Bundle) Tutorial: FireBall Coil Video

Pre-Assembly Coil Frame Full Class: Coil Frame Assembly Video

https://www.youtube.com/live/xNm8iIcPt3I?si=VPaOoilxbs3N5Q6K

Coil Class Full Live Stream: Rodin Coil Workshop Video

https://www.youtube.com/live/eLdp7uOhMNA?si=WNnqDQvZnf6EMLII

Circuit Breakdown

Lightning Thief Circuit(Michels Modified Joule Thief): Michel's Modified ABHA Excitation Circuit: | BeneficenceTV

Full Lighting Thief Breakdown and Demo:
Full Lightning Thief Breakdown/Demo | BeneficenceTV

Increasing Efficiency

How to increase efficiency with LT PCB:
LT Increasing Efficiency with PCB | BeneficenceTV

Efficiency Tutorials coming soon

• Dual Thief
• Throuple Thief
• Paradox Thief
• Green Machine Pulse Motor
• Green Thief