Un cordial saludo amigos de Hive mi creatividad de hoy, es de elaborar un platillo volador hecho con material reciclable, con poco material y fácil de realizar.
A cordial greeting friends of Hive my creativity of today, is to elaborate a flying saucer made with recyclable material, with little material and easy to make.
Aquí le muestro el paso a paso.
Here I show you the step by step.
Materiales:
- (2) platos plásticos desechable.
- Tapa pequeña de cualquier envase.
- Marcador.
- Papel aluminio.
- Pintura (negra y gris).
- Silicon liquido.
- Hilo.
- Pincel.
- Tijera.
- Alambre.
- Palillos de altura de (4 cm).
Materials:
- (2) disposable plastic plates.
- Small lid of any container.
- Marker.
- Aluminum foil.
- Paint (black and gray).
- Liquid silicon.
- Thread.
- Brush.
- Scissors.
- Wire.
- Chopsticks height of (4 cm).
Paso 1:
Con la varilla de alambre previamente caliente, perforo el centro de la tapa, para abrirle un agujero.
Luego comienzo a colorear con la pintura gris, los dos platos desechables y la parte superior de la tapa de color negro.
Step 1:
- With the previously heated wire rod, I pierce the center of the lid, to open a hole in it.
- Then I begin to color with the gray paint, the two disposable plates and the upper part of the lid in black.
Paso 2:
- Comienzo marcando y recortando en el papel aluminio, las tiras que se colocan en el borde de la tapa.
Step 2:
- I start by marking and cutting out on the foil, the strips to be placed on the edge of the lid.
Paso 3:
Introduzco por el agujero de la tapa el pedacito de hilo, haciéndole un nudo en la parte interior.
Después coloco silicon por todo el borde de los platos para unirlos.
Cuando este ya bien pegado, en la union de los 2 platos lo coloreo de color negro.
Step 3:
- I insert the piece of thread through the hole in the lid, tying a knot on the inside.
- Then I put silicone all around the edge of the plates to join them.
- When it is well glued, I color it black at the junction of the plates.
Paso 4:
Pego la tapa encima de los platos.
Luego procedo a marcar 6 círculos pequeños, lo recorto y los pego al rededor del platillo.
Después le doy la vuelta hacia bajo para pegarle las 4 paticas con el palillo de altura, de 4 cm cada una.
Step 4:
- I glue the lid on top of the saucers.
- Then I proceed to mark 6 small circles, cut them out and glue them around the saucer.
- Then I turn it upside down to glue the 4 sides with the 4 cm high stick, 4 cm each.
Este es mi resultado final:
This is my final result:
Todas las fotos son de mi pertenencia y editadas con canva.
All photos are my own and edited with canva.