Hola mi Linda familia de Hive, espero que todos estén muy bien, el día de hoy quiero compartir con todos ustedes, este lindo globo de cumpleaños que realicé con el envoltorio de algunas chucherias, quizá muchas veces nuestro presupuesto no alcanza para comprar un globo, pero podemos ver que con material de reciclase podemos hacer múltiples variedades, la verdad es muy divertido, así que quédense a ver como realicé este increíble globo de cumpleaños.
Hello my nice Hive family, I hope you all are very well, today I want to share with you all, this nice birthday balloon that I made with the wrapping of some sweets, maybe many times our budget is not enough to buy a balloon, but we can see that with recycled material we can make multiple varieties, the truth is very funny, so stay and see how I made this amazing birthday balloon.
Español:
-Materiales:
-Envoltorio de chucherias ( chees tres, Pepitos, Chis Kesitos).
-Tijera.
-Plancha para Cabello.
-Hoja de reciclaje.
-Lápiz.
-Silicón.
-Paso 1:Doblamos el envoltorio de nuestra chucheria, mostrando la parte de adentro, realizamos el patrón del número que vamos a realizar, luego lo colocamos sobre el envoltorio y recortamos cuidadosamente ya que este material es un poco delicado.
English:
-Materials:
-Snack wrapper ( chees tres, Pepitos, Chis Kesitos).
-Scissors.
-Hair iron.
-Recycling sheet.
-Pencil.
-Silicone.
-Step 1: We fold the wrapper of our candy, showing the inside, we make the pattern of the number that we are going to make, then we place it on the wrapper and we cut it carefully since this material is a little delicate.
Español:
-Paso 2: En la parte inferior de nuestro globo, recortamos un espacio el cual será la entrada para inflar nuestro globo, luego de tener nuestras piezas listas, procedemos a pegar los bordes de nuestro globo con la plancha, la temperatura de la plancha debe ser la más bajita. de manera que nuestro globo no se vaya a quemar.
English:
-Step 2: At the bottom of our balloon, we cut a space which will be the entrance to inflate our balloon, after having our pieces ready, we proceed to glue the edges of our balloon with the iron, the temperature of the iron should be the lowest, so that our balloon will not burn.
Español:
-Paso 3: Por la parte que cortamos para inflar nuestro globo, introducimos cuidadosamente un palito de altura, para ampliar el orificio por donde inflaremos nuestro globo, luego procedemos a inflarlo, y luego de que este inflado, sacamos el palito, y mantenemos nuestro dedo allí, y aplicamos un poco de silicón al frió y dejamos secar por unos minutos.
English:
-Step 3: Through the part that we cut to inflate our balloon, we carefully introduce a high stick, to enlarge the hole where we will inflate our balloon, then we proceed to inflate it, and after it is inflated, we take out the stick, and keep our finger there, and apply a little cold silicone and let it dry for a few minutes.
Este es mi resultado final, sinceramente me divertí mucho al hacerlo, gracias por visitar y tomarse un poco de tiempo para leer mi post, los quiero muchísimo, bendiciones para todos, espero que les haya gustado.
This is my final result, I sincerely had a lot of fun doing it, thank you for visiting and taking a little time to read my post, I love you all very much, blessings to all, I hope you liked it.
Todas las fotos son de mi Autoría, y editadas desde canva.
All photos are my Authored, and edited from canva.