Hello friends of hive, hope well all doing good. Today is another day of my craftwork. Thanks, 
The materials I used in making the water tank vehicle:
Paper box
Scissors
Blade
Pencil
Toothpick
Broomstick
Glue
Bottle tops
Toilet roll
Below are the steps I used in making this water tank vehicle.
This is the paper I used in cutting out the shape of the sides of the vehicle
First of all I had to make an outline for the sides to cut
I did same to cut the other side of the vehicle.
I later marked out the tyre section and cut it out
I did same to the duplicate i made before
I then proceeded to the mark out the window.
I used the scissors and blade to cut out the window
After cutting out the window, I cut out some piece to make the front side of the car
I used same process to cut out the lights section.
Later started to join the part i made that involved the lights
Again made the windscreen of the car and assembled it
After assembling, i had to head on to make the base of the car.
I cut out the base of the car where it would support the carrier
I made the carrier where it would support the tank and thought of how I would join it to the forepart of the vehicle
I used toothpick as the connector between the carrier and the fore part of the vehicle
Later went to the make the base of the forepart of the vehicle which will support the tyres
I then inserted it at the button of the forepart of the vehicle
I also had to connect the tyres at the posterior part of the vehicle.
I then jumped off to craft the tank with the toilet roll.
I connected all the parts together but the help of the toothpick i inserted at the middle of the vehicle.
Thank you very much for reading this post of mine. Stay blessed.
