📝Caja de madera (palet vieja)
📝Pintura ocre
📝Brocha
📝Cajas de cartón
📝Silicón caliente
📝Tijeras
📝Espray plata
📝Apliques en foami
⭐ Primeramente para la base del organizador, tomamos la caja de madera que estaba vieja, la pinté con pintura color ocre, dejé secar mientras comenzaba lo demás
⭐ Busque una caja de cartón pequeña para sacar las piezas del organizador
⭐Sacamos dos piezas de cartón, de alto 20cm por 4.5 cm de forma inclinada
⭐Para la parte frontal, una pieza de cartón de 20cm de largo, por 4cm ancho
⭐Para la tapa trasera una pieza de 20cm de los 4 lados
⭐ Armando el organizador, pegamos las 4 piezas para proceder a pegar los escalones
⭐Cortamos trocitos de cartón con medidas de 4cm aproximadamente para pegarlo a los laterales y así sostener el escalón
⭐Se cortan tiras de 20cm de largo por 4cm de ancho. 10 piezas
⭐Se pegan una acostada y la otra levantada así formando los escalones hasta llegar abajo.
⭐ A todos los bordes le coloqué cinta adhesiva de papel
⭐ Luego pinté con spray plateado
⭐Por último coloque unos apliques en foami
⭐Y organicé todo (materiales variados)
Espero les haya gustado muchísimo está idea económica y sencilla.
Helloooooo! Again for this community, contributing a little of what I like to do, this time I bring you a nice organizer of things for nails, totally in recycling, a very economical idea especially betting once again on creativity and if we want to, we can do what! Get to workmaterials 📝Wooden box (old pallet) 📝Ocher paint 📝brush 📝Cardboard boxes 📝Hot silicone 📝Scissors 📝Silver spray 📝Applications in foami Step by Step ⭐ First for the base of the organizer, we took the wooden box that was old, painted it with ocher paint, let it dry while I started the rest ⭐ Find a small cardboard box to remove the pieces from the organizer ⭐We take out two pieces of cardboard, 20cm high by 4.5 cm at an angle ⭐For the front, a piece of cardboard 20cm long and 4cm wide ⭐For the back cover a piece of 20cm from the 4 sides ⭐ Assembling the organizer, we glue the 4 pieces to proceed to glue the steps ⭐We cut pieces of cardboard with measures of approximately 4cm to stick it to the sides and thus support the step ⭐Strips 20cm long by 4cm wide are cut. 10 pieces ⭐Glue one lying down and the other raised thus forming the steps until reaching the bottom. ⭐ I attached paper tape to all edges ⭐ Then I spray painted silver ⭐Finally, place some appliques in foami ⭐And I organized everything (various materials)
I hope you liked this cheap and simple idea very much.