Porta vasos de paletas en forma de pallets.🌸 || Pallet cup holders in the shape of pallets.🌸
Bienvenidos mis hives amigos en esta oportunidad, estaré mostrándoles como realizar unos hermosos porta vasos en forma de pallets y para esta manualidad vamos a necesitar:
Welcome my hives friends in this opportunity, I will be showing you how to make some beautiful cup holders in the shape of pallets and for this craft we will need:
Materiales/Materials
🌸 Paletas de helados.
🌸 Silicon en barra.
🌸 Alicate de punta diagonal.
🌸 Pintura al frÃo o tempera.
🌸 Pincel.
🌸 Ice cream popsicles.
🌸 Silicon stick.
🌸 Diagonal nose pliers.
🌸 Cold paint or tempera.
🌸 Brush.
Pasos/Steps
A. Primero vamos a tomar nuestras paletas y le vamos a cortar las puntas, para cada porta vaso en forma de pallets vamos a necesitar 21 paletas.
A. First we are going to take our pallets and cut off the ends, for each pallet-shaped cup holder we are going to need 21 pallets.
B. Vamos a pintar las paletas del color de nuestra preferencia, esto es opcional, puedes comprar las peletas de colores o en su defecto dejarlas en su presentación original
B. We are going to paint the pallets in the color of our preference, this is optional, you can buy the colored pellets or leave them in their original presentation.
C. vamos tomar 2 paletas, calculamos el ancho del futuro porta vaso en forma de pallets que es proporcional al largo de las paletas, seguido de ello vamos a ubicar 1 paleta en cada extremo y 1 en el centro, estas deben ir se forma lateral para que le den el alto al pallet.
C. we are going to take 2 pallets, we calculate the width of the future cup holder in the form of pallets that is proportional to the length of the pallets, then we are going to place 1 pallet at each end and 1 in the center, these should go sideways to give the height to the pallet.
D. Ahora vamos a tomar 2 paletas y las pegamos paralelas a las 2 peimera paletas que están en la parte exterior de la parte de abajo.
D. Now we are going to take 2 vanes and glue them parallel to the first 2 vanes that are on the outside of the bottom.
E. Lo giramos y le pegamos una paleta en el centro, ya va agarrando forma, 😊 procedemos a pegar las demás paletas por esa cara del pallet dejando entre ellas un delgado espacio.
E. We turn it and glue a pallet in the center, it is already taking shape, 😊 we proceed to glue the other pallets on that side of the pallet leaving a thin space between them.
F. Le damos la vuelta al porta vasos en forma de mini pallet y repetimos el procedimiento.
F. We turn the cup holder into a mini pallet and repeat the procedure.
En este punto ya tenemos nuestros portas vasos en forma de pellets. 🥰 cuales son hermosos y prácticos espero que le gustara la idea y la lleven a cabo en su casa con los más pequeños.
At this point we already have our poets glasses in the form of pellets. 🥰 which are beautiful and practical I hope you like the idea and carry it out at home with the little ones.
Gracias por llegar hasta aquà sera hasta un próximo post.
Thanks for making it this far it will be until a future post.