Con mucho placer y alegría, de nuevo en contacto directo con mi gente bonita de #hive; hoy les estaré presentando el paso a paso de un hermoso arreglo, el cual puedes regalar a esa persona especial que abarca tu corazón; enamora a esa persona, o déjate apreciar por ese amigo o amiga; en fin, ven y aprende conmigo.
With much pleasure and joy, again in direct contact with my beautiful people from #hive; Today I will be presenting the step by step of a beautiful arrangement, which you can give to that special person that encompasses your heart; fall in love with that person, or let yourself be appreciated by that friend; Anyway, come and learn with me.
- Papel metalizado dorado.
- Cartulina espejo dorada.
- Cinta de plástica amarilla.
- Foami negro, blanco, rojo, azul.
- Foami escarchado dorado y gris.
- Papel de seda blanco y rojo.
- Una caja con una altura de 6cm, y el ancho puede ser el de su agrado.
- Tijera, lápiz, regla, silicona.
- Impresión del tema que deseen.
- 2 cuadrados de anime, estos serían del tamaño de la caja.
What do I need
- Gold metallic paper.
- Gold mirror cardboard.
- Yellow plastic tape.
- Foami black, white, red, blue.
- Gold and gray frosted foam.
- White and red tissue paper.
- A box with a height of 6cm, and the width can be to your liking.
- Scissors, pencil, ruler, silicone.
- Print the subject you want.
- 2 anime squares, these would be the size of the box.
Procedure
Paso 1 El primer paso para este proyecto, sería forrar nuestra caja, ya que esta es base de todo nuestro arreglo, en la imagen se muestra el procedimiento que debemos seguir, no es muy complicado.
Step 1 The first step for this project would be to line our box, since this is the basis of all our arrangement, the image shows the procedure that we must follow, it is not very complicated.
Paso 2 Pegamos el anime en la caja.
Step 2 We glue the anime into the box.
Paso 3 Procedemos a elaborar nuestros conitos decorativos, recortamos cuadrados del papel de seda blanco y rojo, colocamos un punto de silicona en el medio del papel de seda rojo, y colocamos el papel de seda blanco arriba, y al antes mencionado también hay que colocarle un poco de silicona en el medio; cuando ya realicemos el proceso, debemos comenzar a formar como una flor, quedando como aparece en la imagen, hacemos suficientes.
Step 3 We proceed to make our decorative cones, cut squares from the white and red tissue paper, place a point of silicone in the middle of the red tissue paper, and place the white tissue paper on top, and the aforementioned must also be placed a little silicone in the middle; When we carry out the process, we must begin to form like a flower, remaining as it appears in the image, we do enough.
Paso 4 Pegamos nuestros conitos en el anime.
Step 4 We glue our cones in the anime.
Paso 5 Este sería el resultado de lo antes hecho.
Step 5 This would be the result of what was done before.
Paso 6 Procedemos con el logo que va pegado en el frente de la caja, lo recortamos y solo lo pegamos con ayuda de la silicona en el foami blanco, recortamos dejando un borde.
Step 6 We proceed with the logo that is pasted on the front of the box, we cut it out and we only glue it with the help of the silicone on the white foam, we cut it leaving an edge.
Paso 7 Pegamos el logo al frente de la caja.
Step 7 We glue the logo to the front of the box.
Paso 8 Ahora debemos hacer nuestros mini toppers, los cuales van a decorar nuestra caja, vamos a recortar la pelota y la palabra goal que hemos impreso.
Step 8 Now we must make our mini toppers, which are going to decorate our box, we are going to cut out the ball and the word goal that we have printed.
Paso 9 Pegamos la pelota en el foami dorado escarchado, y el goal en el foami negro, cuando ya estén pegados, debemos recortarlo dejando bordes, para que se note el color.
Step 9 We stick the ball in the frosted golden foami, and the goal in the black foami, when they are already glued, we must cut it leaving edges, so that the color is noticeable.
Paso 10 Para terminar este procedimiento solo hay que pegar los palillos de altura, pero hay que recortarlos hasta que tengan la altura que queremos.
Step 10 To finish this procedure, you just have to glue the toothpicks in height, but you have to trim them until they are the height we want.
Paso 11 En una hoja, hacemos las palabras que en la imagen aparecen.
Step 11 On a sheet, we make the words that appear in the image.
Paso 12 Recortamos nuestras palabras y el número.
Step 12 We cut out our words and the number.
Paso 13 La palabra felices y Mi. la debemos sacar del foami azul, la palabra Bebe, tenemos que sacarla en rojo, y el número 41 lo debemos pasar en la cartulina espejo dorada.
Step 13 The word happy and Mi. We must take it out of the blue foami, the word Bebe, we have to take it out in red, and the number 41 we must pass on the gold mirror cardboard.
Paso 14 Ahora, tenemos que hacer el fondo, las palabras felices y Mi, hay que pegarlas en el foami escarchado dorado, para así recortarlo dejando bordes; la palabra Bebe, tiene como fondo el foami blanco, también hay que recortar y dejar bordes; y por último, el número 41 tiene de fondo el foami negro, igualmente dejando bordes.
Step 14 Now, we have to make the background, the words happy and My, we have to stick them on the golden frosted foami, in order to cut it out leaving edges; the word Bebe, has white foami as a background, you also have to cut out and leave edges; and finally, number 41 has black foami in the background, also leaving borders.
Paso 15 Cuando hayamos terminado con las palabras, seguimos con nuestro fondo, que sería la pelota y el logo del Barcelona, solo debemos pegar la pelota en el foami gris escarchado, y el logo en el foami negro, recortamos y dejamos bordes.
Step 15 When we have finished with the words, we continue with our background, which would be the ball and the Barcelona logo, we just have to stick the ball on the frosted gray foam, and the logo on the black foam, cut and leave edges.
Paso 16 Realizamos tres estrellas de pequeño a grande, en la cartulina metalizada dorada.
Step 16 We make three stars from small to large, on the gold metallic cardboard.
Paso 17 Comenzamos a pegar todos los elementos, estas serían las posiciones.
Step 17 We begin to paste all the elements, these would be the positions.
Paso 18 Pegamos el palillo de altura en el topper, para que pueda hundirse en el anime y se sostenga
Step 18 We glue the height stick on the topper, so that it can sink into the anime and hold
Paso 19 Así de bello, quedó nuestro topper.
Step 19 This is how beautiful our topper was.
Paso 20 Colocamos todos los elementos en nuestra caja ya decorada, la cinta amarilla es para decorar; esto es una hermosura, verdad mis amores.
Step 20 We put all the elements in our already decorated box, the yellow ribbon is to decorate; This is a beauty, true my loves.
Mis amores, hasta aquí este hermoso viaje; preciosas #manualidades especialmente diseñadas para todos ustedes, espero se animen e inicien en este maravilloso mundo; esto es fabuloso, creativo y motivante. Adelante bellezas, saludos.
My loves, up to here this beautiful trip; precious #crafts specially designed for all of you, I hope you will cheer up and start in this wonderful world; this is fabulous, creative and motivating. Go ahead beauties, greetings.
...Gracias Por Visitar...
...Thanks for visiting...
Las imágenes en collage, son de mi propiedad y editadas con Photogrid
The collage images are my property and edited with Photogrid
Imágenes Fotográficas, tomadas por Ronmel Nuñez.
Photographic images, taken by Ronmel Nuñez