Hello friends of hive, how are you? Today I have to show you how to make a cute little bag with a ladybug design, it is very easy to make and with affordable materials. It is a nice detail for the girls I made it for my niece and she loved it. Here we go
Hola amigos de hive, ¿cómo están? hoy que mostrarles cómo hacer una linda bolsita con un diseño de mariquita, es muy fácil de hacer y con materiales accesibles. Es un lindo detalle para las niñas yo se la hice a mi sobrina y le encanto. Aquí vamos
</center
Materials:
-Opaline envelope (recycled)
-Cardboard cutouts (red and black)
-Brush
-Hole openers
-Leaves (recycled)
-Scissors (plain and patterned)
-Marker
-Pencil
-Tape (cutouts)
-Soda cap
-Green paint
-Silicone
-Drawing of a ladybug (easy to make)
Materiales:
-Sobre de opalina (reciclado)
-Recortes de cartulina (rojo y negro)
-Pincel
-Abre huecos
-Hojas (reciclada)
-Tijeras (lisa y con diseño)
-Marcador
-Lápiz
-Cinta (recortes)
-Tapa de refresco
-Pintura verde
-Silicón
-Dibujo de una mariquita (es fácil de hacer)
</center
Once we have the materials.../ Una vez tengamos los materiales…
Step 1
First, fold the opaline envelope in half, mark and cut out.
Paso 1
Lo primero es doblar el sobre de opalina por la mitad, marcar y recortar.
</center
Step 2
Once the envelope is cut in half, cut out what will be the top of our bag and glue the side of the envelope with silicone.
Paso 2
Una vez cortado por la mitad el sobre, recortamos lo que será la parte superior de nuestra bolsita y pegamos con silicón el costado del sobre.
</center
Step 3
Then we fold in the center, cut the top with the shape scissors in this case beak what will be our tab to close the bag and open a hole with the hole opener.
Paso 3
Luego doblamos por el centro, cortamos la parte superior con la tijera de formas en este caso de pico lo que será nuestra pestaña para cerrar la bolsita y abrimos un orificio con el abre huecos.
</center
Once the bag is ready, we proceed to decorate it./Ya lista la bolsita, procedemos a decorarla.
Step 4
With the soda cap and the help of a pencil we mark on the black cardboard and cut out two circles, which will be the body of our ladybug. Then with the green paint we paint a grass.
Paso 4
Con la tapa de refresco y la ayuda de un lápiz marcamos en la cartulina negra y recortamos dos círculos, lo que será el cuerpo de nuestra mariquita. Luego con la pintura verde pintamos un césped.
</center
Step 5
The next step is to cut the wings of the ladybug and draw black dots on them. To do this we have to cut out the wings of the ladybug drawing, fold them in half, mark them on the red cardboard and cut them out.
Paso 5
Lo siguiente será cortar las alas del mariquita y dibujarle con color negro puntitos. Para hacer esto tenemos que recortar las alas del dibujo de la mariquita, las doblamos a la mitad la marcamos en la cartulina roja y recortamos.
</center
Step 6
Then we fold a sheet of paper twice and in the corner we draw the petal of a flower and cut it out.
Paso 6
Después doblamos una hoja papel dos veces y en la esquina dibujamos el pétalo de una flor y recortamos.
</center
Step 7
Once the cords are ready, glue them with silicone on the bag.
Paso 7
Una vez listos los acordarnos los pegamos con silicón en la bolsita.
</center
Step 8
Then we make the mark of the ladybug's flight and introduce the ribbon through the holes of the tab, make a loop and that's it.
Paso 8
Luego hacemos la marca del vuelo de la mariquita e introducimos la cinta por los orificios de la pestaña hacemos un lazo y listo.
</center
Finally we have as a result this cuteness./Finalmente tenemos como resultado esta lindura.
I had a lot of fun making this, I hope you like it. You can follow me . /Me divertí mucho haciendo esto, espero que les guste. Pueden seguirme
.
the photos were edited by me, I'm new at editing photos, sorry if I did something wrong. /las fotos fueron editadas por mi,soy nueva editando fotos, disculpen si hice algo mal.
the translator I use is:/el traductor que utilice es: www.deepl.com/translator (version gratis)