ESP-ENG] / Pequeños zarcillos con forma redonda♥️🖤😃😃👍🌹🍓 /Small round-shaped tendrils♥️🖤😃😃👍🌹🍓 /@alexanderflx

It's time to make our girls fall in love, beautiful tendrils.

Hello, happy night to all, I hope you are well, a big hug to all those people who have supported me, thank you very much for your comments and your time, tonight I want to share with you the elaboration of some beautiful earrings, they are not very difficult to doing and the truth with very few materials I am trying to make very easy earrings they like with very little materials and I wait time but with a lot of love and patience these earrings are small because they are made for the daily use of those beautiful girls lesn this beautiful piece, well sin more to say we will go step by step that are also very practical.

What do we need.

• piedras de bisutería
• alambre para bisutería calibre 22 y calibre y 24
• pinzas

jewelry stones
22-gauge and 24-gauge jewelry
tweezers

Paso 1: Bueno como le comenté los pendientes son muy fáciles de realizar no se solprendan por lo corto de los pasos, para este primer paso cortaremos un trozo de alambre de unos quince del alambre calibre veintidós este alambre es un poco más grueso que el calibre veinticuatro, luego de cortar el trozo de alambre aremos un redondo no olviden que si quieren hacer un redondo perfecto es mejor utilizar algo redondo como un marcador o algo parecido .

Step 1: Well, as I told you, the earrings are very easy to make, don't worry because the steps are short, for this first step we will cut a piece of wire of about fifteen of the twenty-two gauge wire, this wire is a little more frightening that the twenty-four gauge, after cutting the piece of wire we will make a round do not forget that if you want to make a perfect round it is better to use something round as a marker or something similar .

.

Step 2: Well, as you can read and see, the first step is very easy and fast. To continue working with our tendrils, we will again take the piece that we made in the first step. As we can see, we have a piece of wire left, that piece of wire We will take it, we will measure it and we will fold it right in the middle, then we will fold it in a spiral shape, leaving the double that we did in the middle of the round, as you can see in the photo, the wire that we bent was left behind, that stick is the one that you will use to put in your ear we will cut a little the excess and that's it super easy simple and fast.

Step 3: For our third step we will take the stones and the twenty-four gauge wire that is a little thinner and will be much easier for us to handle we will also take the piece that we made in the first two steps this piece is the base of the tendrils without her we could not make them, after having everything we will take the end of the wire and we will twist it a little in the base we will try to secure or tighten it very well then we will insert a stone and we will twist the wire again from the base and we will continue doing so until we fill the edge of the piece without filling the middle.

Paso 4:Bueno chicas y chicos la verdad es super fácil realizar estos pendientes pero también son muy elegantes no confundan su simpleza, bueno para terminar con los pendientes seguiremos trabajando con el sabré delgado les recuerdo que de ese alambre cortaremos unos cuarenta centímetros, bueno tomaremos nuestra pieza y meteremos una piedra y cruzaremos el alambre lo estorchamos y meteremos otra piedra y así asta llenar el centro que nos quedo descubierto luego que tengamos el redondo lleno pondremos nuestra creatividad a trabajar pasaremos el alambre de un lugar a otro y entorchamos para asegurar para este paso no hay un patrón solo aremos lo que queramos.

.

Step 4: Well girls and boys the truth is that it is super easy to make these earrings but they are also very elegant do not confuse their simplicity, well to finish with the earrings we will continue working with the thin saber I remind you that we will cut about forty centimeters from that wire , well we will take our piece and we will put a stone and we will cross the wire we will screw it and we will put another stone and so on until we fill the center that remains uncovered after we have the round full we will put our creativity to work we will pass the wire from one place to another and we will screw to ensure for this step there is no pattern we will only do what we want.