Hello dear Hivers, I hope you had a great day. In my first publication I bring you a Beautiful Portrait Portait made with recycling material, very easy to make and where you will not have much expense!
Para la realización del porta-retrato necesitaremos:
✔ Cartón.
✔ Silicon frío.
✔ Silicon caliente.
✔ Foami de 3 colores.
✔ Hola blanca.
✔ Cartulina de Color.
✔ Tijera.
✔ Foto.
✔ Lápiz.
✔ Regla.
For the realization of the portrait holder we will need:
✔ Cardboard.
✔ Cold silicon.
✔ Hot silicon.
✔ Foami of 3 colors.
✔ Hello white.
✔ Cardboard
✔ Scissors.
✔ Photo.
✔ Pencil.
✔ Ruler.
Paso 1
Medimos la foto, en mi caso 24 cm de alto por 20 cm de ancho, tomamos el cartón y realizaremos (4 tiras de 28 cm x 2 cm) y (2 tiras de 21,5 cm x 2 cm), con la finalidad de quedar mas grande que la foto. Pegamos con silicon caliente y armamos. Se puede notar en la ultima foto la abertura que hemos creado para introducir la foto.
Step 1
We measure the photo, in my case 24 cm high by 20 cm wide, we take the cardboard and we will make (4 strips of 28 cm x 2 cm) and (2 strips of 21.5 cm x 2 cm), in order to be larger than the photo. We glue with hot silicone and assemble. You can see in the last photo the opening that we have created to insert the photo.
Paso 2
Con otro cartón se procede a realizar la tapa de atrás, tomaremos la misma medida del marco y se traza con lápiz el cuadrado y se pica con la tijera, luego tomamos la hoja blanca y pegamos en una de las caras con el silicon frío, para culminar se pega por la parte de atrás del marco con el silicon caliente.
Step 2
With another cardboard we proceed to make the back cover, we will take the same measurement of the frame and trace the square with a pencil and chop it with the scissors, then we take the white sheet and stick on one side with the cold silicone, to culminating is glued to the back of the frame with the hot silicone.
Paso 3
Con el foami verde cortaremos 2 tiras de (22,5 cm x 2,5 cm), con el rojo 2 tiras de (28,5 cm x 2,5 cm) y con el blanco realizaremos un detalle para decorar las puntas, en el caso hice unas estrellas y pegamos.
Step 3
With the green foami we will cut 2 strips of (22.5 cm x 2.5 cm), with the red 2 strips of (28.5 cm x 2.5 cm) and with the white we will make a detail to decorate the tips, in the case I made some stars and we hit.
Paso 4
Con otro cartón realizaremos la base del porta retrato a la medida de tu preferencia, dejamos 2 cm en la parte inferior para doblar y pegar, con la cartulina de color, decoramos la base y parte de atrás del porta retrato.
Step 4
With another cardboard we will make the base of the portrait holder to the measure of your preference, we leave 2 cm at the bottom to fold and paste, with the colored cardboard, we decorate the base and back of the portrait holder.
Ya casi terminamos!
Solo queda introducir la foto dentro de nuestro hermoso porta retrato por la rendija que se ha creado en el paso 1.
We're almost done!
It only remains to insert the photo into our beautiful portrait frame through the slit that was created in step 1.
Listo!!! ✨Hermoso Porta Retrato✨
Ready!!! ✨Beautiful Portrait Porta✨
Thanks for reading me and God Bless you 🙏
Todas las fotos son de mi autoridad
Traducido por (Traductor español a ingles)
Hasta la Próxima!
All photos are my authority @ andreina6
Translated by (Spanish to English Translator)
Until next time!