_{Hive account@angdavid21}

---

---

Happy and blessed day friends, I am with you again to participate in the love contest 😁🥰, in a few days we will be celebrating the day of love and friendship where each of us express our love and friendship for that special person who is always by our side, that is why I decided to participate and creatively show a small gift to my ideal person, the one who has been by my side for 15 years of his life and who today love remains the same as the first day, although a love that is more mature, strong and with well-founded foundations, my wife Hive account@johordelis, also active on the platform, is that special person in my life, who during these 15 years we have had excellent moments and bad, but from the hand of God we have always come out ahead and more because now we have 2 blessings 😁😄 A 4-year-old Ángel Armado and a 2-year-old Andrés Eduardo. For these reasons and many more, my ideal person is my wife and for her I dedicate this small gift but with a lot of love. So here's how to do it.

---

Materials to use

• MDF boards
• a handsaw
• Cold paint
• Pencil
• Brushes
• Paper masking tape
• scalpel

Materiales a utilizar

• Tablillas de MDF
• Un serrucho
• Pintura al frío
• Lápiz
• Pinceles
• Cinta adhesiva de papel
• Bisturí

---

Step 1

Paso 1

For this first step we will take one of the boards and cut 12 slats, 6 of them 2 cm wide by 13 centimeters long, and the other 6 2 centimeters wide by 18 centimeters long, these measurements are for approximately postcard size photographs

Para este primer paso tomaremos una de las tablas y picamos 12 Tablillas, 6 de ellas de 2 CM de ancho por 13 centímetros de largo, y las otras 6 de 2 centímetros de ancho por 18 centímetros de largo, estás medidas son para fotografías aproximadamente tamaño postal

---

Step 2

Paso 2

In this second step, after chopping the board, we will make each one a 90⁰ angle so that when we stick them we will have a neater rectangular structure, I confess that making these angles made me a little stressed 😁 because they did not turn out the way I wanted , and my wife told me that if I made scale cars that it is more complex, why can't you make a simple angle? So I started over 😀 and here's how they turned out.

En este segundo paso luego de picar la tabla les haremos ángulo de 90⁰ a cada una de manera que al pegarlas nos quede una estructura rectangular más prolija, les confieso que realizar estos ángulos me estreso un poco 😁 porque no me salían como quería, y mi esposa me decía que si hacía autos a escala que es más complejo, porque no puedes hacer un simple ángulo? Así que empecé de nuevo 😀 y aquí el como me salieron.

---

Step 3

Paso 3

Once the angles are overcome, we proceed to glue the ends, I used liquid Silicon, it takes a little longer to stick but it's worth the wait 😁

Una vez superado lo de los ángulos procedemos a pegar las puntas, yo utilice Silicon líquido tarda un poco más en pegarse pero vale la espera 😁

---

Step 4

Paso 4

It's time to color our portrait frames, take the paint and give them the color you wanted, apply several coats of paint since wood absorbs a lot of paint. Once the frames were dry, I made a detail of blank lines which helped me by sticking paper tape and with the scalpel I made the lines around it so that it stands out a little.

Llega la hora de darle color a nuestros porta retratos tome la pintura y les di el color que deseaba, le pase varias manos de pintura ya que la madera absorbe mucha pintura. Una vez que estuvieran secos los marcos les hice un detalle de líneas en blanco el cual me ayude pegando cinta adhesiva de papel y con el bisturí realice las líneas alrededor para que resalte un poco.

Making the lines in the frames

Realizando las líneas en los marcos

---

Step 5

Paso 5

We're not long now, as these portrait frames will be hanging, take two special wooden background strip screws, remove their heads and screw them through the edges of the frames so that we have a hanging style.

Ya nos falta poco, como estos porta retratos serán colgantes, tome dos tornillos tira fondo especial para madera les quite la cabeza y los atornillamos por las orillas de los marcos de manera que nos quede un estilo de colgante.

Step 6

Paso 6

Already in this last step we decorate the frames with the universal word in love. I LOVE YOU in this case I wrote it in English because there are three frames. Then we select the photographs to display and that's it, our pendant portrait portal is ready to decorate the special corner in our house.

Ya en este último paso decoramos los marcos con la palabra universal en el amor. TE AMO en este caso lo escribí en inglés por ser tres marcos. Luego seleccionamos las fotografías a exhibir y listo, nuestro portal retrato colgante estar listo para adornar el rincón especial en nuestra casa.

---

Here I show you how the gift turned out for my special person in my life.

A continuación les muestro como quedó el obsequio para mí persona especial en mi vida.

---

Well my friends in this way I made my gift, I hope you liked it in advance thank you very much for visiting my post, God bless you greatly and see you another time.

Bueno mis amigos de esta manera realice mi obsequio, espero les haya gustado de antemano muchas gracias por visitar mi post, Dios los bendiga grandemente y nos vemos en otra oportunidad.

I want to invite my friend @karelys5318. To participate in this wonderful contest.

Quiero hacer la invitación a mi amiga @karelys5318. A participar en este maravilloso concurso.

All photos were taken by my Alcatel 1v Smartphone

This post is translated by android app Google translate

Image edited through the Android app incollage

Imágenen editada através de la aplicación incollage de Android