Hello friends and creative hivers! Welcome to a new blog where I will share with you some ideas to remodel the pots of your plants and give a more beautiful and unique style to your garden plants.✨🪴

With just a few materials you can make fun recycled flower pots with materials that you probably have at home and that you no longer give a specific use to. If we talk about bottles and jars of sauces or butter, when we run out of content, some throw away the container, others keep and collect them, and others like us give these containers a second chance.

There are many ways to make a unique and pretty design for our pots, we can paint very pretty drawings and figures, here what you have to do is have a lot of imagination, in my case I have used materials as I mentioned that I have at home and I will be using paints that do not fall easily such as nail polish and oil-based paints for the home, these paints although the drying process is slow are very good for painting this type of containers and they do not fall easily since our plants and pots when in contact with water can get wet and it is preferable to use this type of paints, we will be using a little bit of gasoline to dry our brush or brush with which we are painting since only with it our tools are cleaned very well, just a little bit is enough to clean them.

These recycled pots can last us a long time and bring a little harmony to our home by decorating them very nicely, that is why today we are going to be making these containers to remodel a plant that has a damaged pot, we will give it another chance, stay with me during the process and I hope you like these great ideas, let's go with the materials.

Materiales:// Materials:

Pasos a seguir:// Steps to follow:

Paso 01

Step 01

To begin we are going to grab our plastic container, the one we have chosen to work with, whether it is a plastic soda bottle or a bottle of oil or paint, any container will do because we are going to be doing this craft with recycled material, so you can use any container. The idea is to clean its surface very well, both inside and out, so that it is clean and the work process is much easier.

After having our container clean we move on to paint it with our thick brush the first layer of paint on the outside of the container, on the surface where you work remember to always place a rag so that in case the paint runs or spills the rag protects that surface, then we begin by painting everything around the container, I put on approximately three layers of paint because I was seeing that the drawings on the container were still visible so we will put on three layers of paint to cover the surface and so that no letters are visible, after the paint dried I simply used the needle to open some holes in the base of the container as seen in the image friends, you open your holes below so that the water from the plant drains.

Paso 02

Step 02

We proceed to paint the details of what will be our flower pot, the truth is I had to see and look at many ideas on Pinterest but the truth is that I did not have another color of paint that would look good, I used this blue and black color to make some line art style flowers since they seemed very pretty to me, then before painting the design I will be using a cap from another bottle that I do not use and there I will add a little bit of nail polish so that while we paint it will not be necessary to open and close our nail polish every moment and it will not dry completely so a little bit is enough to paint the details.

For the design I chose to paint some flowers with buds and branches simulating the flowers of a beautiful meadow in the forest. I made daisy-type flowers and some leaves, also small branches with very small flowers.

Paso 03

Step 03

A garden is not a garden without its butterflies, so I have painted two on both sides posing on the flowers and on one half of the side. I also wanted to add a motivational phrase that every time I see this pot I must remind myself that "I am art" and that I can do much more than my thoughts sometimes prevent me from doing and although I fear the unknown, that should not be an impediment to motivating me to do things and learn much more.

Paso 04

Step 04

The next step is one of my favorites, moving the plant to the new pot, I do this carefully and taking the plant out so that it is not damaged, we can try to wet the sand so that it is much easier for the sand to soften, we are going to place two cm of sand below, we put our right in the middle of the pot with sand and we put the rest of the sand that was in the old pot again, we press the sand, add a little water and that's it, the process of our new pot is ready with our little plant inside, how beautiful it looks

Resultado//Result:

This is how our plant has been moved and we gave it a better appearance with a new pot that is also recycled. I hope you like it a lot and you can see the results here in the following photos.

I really appreciate the time you took to read my blog and I hope you have a beautiful and excellent day. If you liked it, don't forget to leave your nice comment and we'll see each other in another upcoming blog. I'll bring you many more ideas.😊✨❤️

_{Creating things with love 🌷❤️
🦋✨ All the images in this publication are my author ,📱taken with my TecnoSpark8C cell phone |📸Photos edited in PicsArt and Canva. Text translated in Google Translate.
Follow me for more content 📌}