Hola amigas y amigos de Hive, en especial de la comunidad Hive DIY. Hoy quiero compartir con ustedes una manualidad que esta algo adelantada a la época, puesto que aún falta un poco para Navidad. Sin embargo, hoy a mi nieta le indicaron que el lunes será realizado un compartir navideño. Quedé bastante extrañada, pero me comentó la maestra que fueron ordenes de la directora realizar dicha actividad.
Las niñas deben asistir a la actividad usando cintillos alusivos a la navidad, mientras que los niños deben asistir con el tradicional gorro navideño. Lis, no contaba con un cintillo navideño, pero si tenía un cintillo algo estropeado que decidí desarmar para usar la base, es decir, reusar para decorarlo con motivos navideños.
Y así fue el resultado:
Ya Lis tiene su cintillo navideño, pero ahora faltan ustedes y por ello quiero compartir las instrucciones para crearlo. Es una pieza bastante sencilla de armar, los trazados de las piezas son fáciles y ya lo que restaría hacer con cuidado es el armado, para que las piezas queden bien sujetas a la base y sea "anti-brincos".
Como materiales, he reusado una diadema o base de cintillo que tenía a la mano, también una variedad de colores de foami que puedes ajustar según la disponibilidad que tengas. Yo hubiera querido hacerlo en su totalidad con foamis escarchados, pero la disponibilidad de los mismos fue una limitante. Sin embargo, a pesar de ello considero que el resultado fue bastante lindo y agradable.
Materiales
- Foamis de varios colores: Marrón claro y escarchado, rojo, negro, verde, dorado.
- Silicon
- Diadema o cintillo de base
Instrucciones
Iniciaremos la manualidad forrando la base. Para ello, he cortado foami para cubrir la parte superior y para las puntas o extremos en color verde.
Dibujamos y cortamos las piezas según el color correspondiente. Los cuernos del reno, le he colocado en dos partes, una base marrón claro y la otra delantera en dorado. Esto brindará mejor estabilidad a los cuernos. También corté un rectángulo en color rojo, al cual le he unido posteriormente ambos extremos al centro con silicon.
Para el armado, nos centramos primeramente en la ornamenta. Armarla como una parte única. Vamos a ir pegando las piezas, cortamos detalles para el lazo. Para este último, corté las orejitas del lazo y le he puesto una cinta de foami de tono negro al centro y un cuadrado dorado para simular una hebilla.
Después de haber armado el adorno como una pieza única, la pegaremos a la base. Usaremos suficiente silicon para asegurar que las piezas estén bien adheridas.
Como detalles finales, corté dos pares de hojas navideñas en tono verde y les colocamos a las extremas de las orejitas. Para reforzar, he colocado en la parte trasera de la ornamenta, un trozo de foami con suficiente silicon para dar más estabilidad.
Resultado
Al hacerse la hora para ir a buscar a Lis a la escuela, le mostré las fotos del cintillo a la maestra. Estaba animada y contenta, dijo que había quedado muy lindo y además que lo había elaborado rápidamente. Por su parte, mi nieta Lis estaba super feliz, ella ama tener accesorios para el cabello y no dudó en probárselo y abrazarme. Esto, me hace muy feliz, las satisfacciones de mi nieta.
Bueno, esto es todo por esta ocasión. Espero haya sido de su agrado, a la vez que si tienen alguna sugerencia o experiencia que quisieran compartir conmigo, sería muy grato. Las fotos que he colocado a lo largo del texto, las he tomado desde mi móvil Infinix.
Tengan todos un bendecido día
***
ENGLISH
Hello friends of Hive, especially the Hive DIY community. Today I want to share with you a craft that is somewhat ahead of the season, since Christmas is still a little bit away. However, today my granddaughter was told that a Christmas sharing would be held on Monday. I was quite surprised, but the teacher told me that it was the director's orders to carry out this activity.
Girls must attend the activity wearing Christmas headbands, while boys must attend with the traditional Christmas hat. Lis, I didn't have a Christmas headband, but I did have a slightly damaged headband that I decided to disassemble to use the base, that is, reuse it to decorate it with Christmas motifs.
And this was the result:
Lis already has her Christmas headband, but now you are missing and that is why I want to share the instructions to create it. It is a fairly simple piece to assemble, the layouts of the pieces are easy and what remains to be done carefully is the assembly, so that the pieces are well attached to the base and are "anti-jump".
As for materials, I have reused a headband or headband base that I had on hand, as well as a variety of foam colors that you can adjust depending on the availability you have. I would have liked to do it entirely with frosted foamis, but their availability was a limitation. However, despite this I consider that the result was quite nice and pleasant.
Materials
- Foamis of various colors: Light brown and frosty, red, black, green, gold.
- Silicon
- Headband or base headband
Instructions
We will start the craft by lining the base. To do this, I have cut foami to cover the top part and for the tips or ends in green.
We draw and cut the pieces according to the corresponding color. I have placed the reindeer antlers in two parts, a light brown base and the other front in gold. This will provide better stability to the horns. I also cut a red rectangle, to which I have subsequently attached both ends to the center with silicone.
For assembly, we focus first on the ornament. Assemble it as a single part. We are going to glue the pieces, cut details for the bow. For the latter, I cut the ears of the bow and put a black foam ribbon in the center and a gold square to simulate a buckle.
After we have assembled the ornament as a single piece, we will glue it to the base. We will use enough silicone to ensure that the pieces are well adhered.
As final details, I cut two pairs of green Christmas leaves and placed them at the ends of the ears. To reinforce, I have placed a piece of foam with enough silicone on the back of the ornament to give more stability.
Result
When it was time to go pick up Lis from school, I showed the photos of the headband to the teacher. She was animated and happy, she said that it had turned out very nice and also that she had put it together quickly. For her part, my granddaughter Lis was super happy, she loves having hair accessories and she didn't hesitate to try them on and hug me. This makes me very happy, the satisfaction of my granddaughter.
Well, that's all for this occasion. I hope you liked it, and if you have any suggestions or experiences that you would like to share with me, it would be very appreciated. The photos that I have placed throughout the text were taken from my Infinix mobile.
Have a blessed day everyone
***